define physical registers. It's currently very restrictive, only catching
cases where the CE is in an immediate (and only) predecessor. But it catches
a surprising large number of cases.
rdar://10660865
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147827 91177308-0d34-0410-b5e6-96231b3b80d8
These heuristics are sufficient for enabling IV chains by
default. Performance analysis has been done for i386, x86_64, and
thumbv7. The optimization is rarely important, but can significantly
speed up certain cases by eliminating spill code within the
loop. Unrolled loops are prime candidates for IV chains. In many
cases, the final code could still be improved with more target
specific optimization following LSR. The goal of this feature is for
LSR to make the best choice of induction variables.
Instruction selection may not completely take advantage of this
feature yet. As a result, there could be cases of slight code size
increase.
Code size can be worse on x86 because it doesn't support postincrement
addressing. In fact, when chains are formed, you may see redundant
address plus stride addition in the addressing mode. GenerateIVChains
tries to compensate for the common cases.
On ARM, code size increase can be mitigated by using postincrement
addressing, but downstream codegen currently misses some opportunities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147826 91177308-0d34-0410-b5e6-96231b3b80d8
After collecting chains, check if any should be materialized. If so,
hide the chained IV users from the LSR solver. LSR will only solve for
the head of the chain. GenerateIVChains will then materialize the
chained IV users by computing the IV relative to its previous value in
the chain.
In theory, chained IV users could be exposed to LSR's solver. This
would be considerably complicated to implement and I'm not aware of a
case where we need it. In practice it's more important to
intelligently prune the search space of nontrivial loops before
running the solver, otherwise the solver is often forced to prune the
most optimal solutions. Hiding the chained users does this well, so
that LSR is more likely to find the best IV for the chain as a whole.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147801 91177308-0d34-0410-b5e6-96231b3b80d8
We still save an instruction when just the "and" part is replaced.
Also change the code to match comments more closely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147753 91177308-0d34-0410-b5e6-96231b3b80d8
This enables basic local CSE, giving us 20% smaller code for
consumer-typeset in -O0 builds.
<rdar://problem/10658692>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147720 91177308-0d34-0410-b5e6-96231b3b80d8
LoopSimplify may not run on some outer loops, e.g. because of indirect
branches. SCEVExpander simply cannot handle outer loops with no preheaders.
Fixes rdar://10655343 SCEVExpander segfault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147718 91177308-0d34-0410-b5e6-96231b3b80d8
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147717 91177308-0d34-0410-b5e6-96231b3b80d8
opportunities that only present themselves after late optimizations
such as tail duplication .e.g.
## BB#1:
movl %eax, %ecx
movl %ecx, %eax
ret
The register allocator also leaves some of them around (due to false
dep between copies from phi-elimination, etc.)
This required some changes in codegen passes. Post-ra scheduler and the
pseudo-instruction expansion passes have been moved after branch folding
and tail merging. They were before branch folding before because it did
not always update block livein's. That's fixed now. The pass change makes
independently since we want to properly schedule instructions after
branch folding / tail duplication.
rdar://10428165
rdar://10640363
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147716 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates a lot of constant pool entries for -O0 builds of code
with many global variable accesses.
This speeds up -O0 codegen of consumer-typeset by 2x because the
constant island pass no longer has to look at thousands of constant pool
entries.
<rdar://problem/10629774>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147712 91177308-0d34-0410-b5e6-96231b3b80d8
present in the bottom of the CFG triangle, as the transformation isn't
ever valuable if the branch can't be eliminated.
Also, unify some heuristics between SimplifyCFG's multiple
if-converters, for consistency.
This fixes rdar://10627242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147630 91177308-0d34-0410-b5e6-96231b3b80d8
System V Application Binary Interface. This lets us use
-fvisibility-inlines-hidden with LTO.
Fixes PR11697.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147624 91177308-0d34-0410-b5e6-96231b3b80d8
code can incorrectly move the load across a store. This never
happens in practice today, but only because the current
heuristics accidentally preclude it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147623 91177308-0d34-0410-b5e6-96231b3b80d8
a combined-away node and the result of the combine isn't substantially
smaller than the input, it's just canonicalized. This is the first part
of a significant (7%) performance gain for Snappy's hot decompression
loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147604 91177308-0d34-0410-b5e6-96231b3b80d8
Testing: passed 'make check' including LIT tests for all sequences being handled (both SSE and AVX)
Reviewers: Evan Cheng, David Blaikie, Bruno Lopes, Elena Demikhovsky, Chad Rosier, Anton Korobeynikov
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147601 91177308-0d34-0410-b5e6-96231b3b80d8
Now that canRealignStack() understands frozen reserved registers, it is
safe to use it for aligned spill instructions.
It will only return true if the registers reserved at the beginning of
register allocation allow for dynamic stack realignment.
<rdar://problem/10625436>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147579 91177308-0d34-0410-b5e6-96231b3b80d8
(x > y) ? x : y
=>
(x >= y) ? x : y
So for something like
(x - y) > 0 : (x - y) ? 0
It will be
(x - y) >= 0 : (x - y) ? 0
This makes is possible to test sign-bit and eliminate a comparison against
zero. e.g.
subl %esi, %edi
testl %edi, %edi
movl $0, %eax
cmovgl %edi, %eax
=>
xorl %eax, %eax
subl %esi, $edi
cmovsl %eax, %edi
rdar://10633221
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147512 91177308-0d34-0410-b5e6-96231b3b80d8
This patch caused a miscompilation of oggenc because a frame pointer was
suddenly needed halfway through register allocation.
<rdar://problem/10625436>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147487 91177308-0d34-0410-b5e6-96231b3b80d8
The failure seen on win32, when i64 type is illegal.
It happens on stage of conversion VECTOR_SHUFFLE to BUILD_VECTOR.
The failure message is:
llc: SelectionDAG.cpp:784: void VerifyNodeCommon(llvm::SDNode*): Assertion `(I->getValueType() == EltVT || (EltVT.isInteger() && I->getValueType().isInteger() && EltVT.bitsLE(I->getValueType()))) && "Wrong operand type!"' failed.
I added a special test that checks vector shuffle on win32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147445 91177308-0d34-0410-b5e6-96231b3b80d8
The failure seen on win32, when i64 type is illegal.
It happens on stage of conversion VECTOR_SHUFFLE to BUILD_VECTOR.
The failure message is:
llc: SelectionDAG.cpp:784: void VerifyNodeCommon(llvm::SDNode*): Assertion `(I->getValueType() == EltVT || (EltVT.isInteger() && I->getValueType().isInteger() && EltVT.bitsLE(I->getValueType()))) && "Wrong operand type!"' failed.
I added a special test that checks vector shuffle on win32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147399 91177308-0d34-0410-b5e6-96231b3b80d8
