from the dragonegg build bots when we turned on the full version of the
pass. Included a much reduced test case for this pesky bug, despite
bugpoint's uncooperative behavior.
Also, I audited all the similar code I could find and didn't spot any
other cases where this mistake cropped up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164178 91177308-0d34-0410-b5e6-96231b3b80d8
working on FCA splitting. Instead of refusing to form a common type when
there are uses of a subsection of the alloca as well as a use of the
entire alloca, just skip the subsection uses and continue looking for
a whole-alloca use with a type that we can use.
This produces slightly prettier IR I think, and also fixes the other
failure in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164146 91177308-0d34-0410-b5e6-96231b3b80d8
FCAs. This is essential in order to promote allocas that are used in
struct returns by frontends like Clang. The FCA load would block the
rest of the pass from firing, resulting is significant regressions with
the bullet benchmark in the nightly test suite.
Thanks to Duncan for repeated discussions about how best to do this, and
to both him and Benjamin for review.
This appears to have blocked many places where the pass tries to fire,
and so I'm expect somewhat different results with this fix added.
As with the last big patch, I'm including a change to enable the SROA by
default *temporarily*. Ben is going to remove this as soon as the LNT
bots pick up the patch. I'm just trying to get a round of LNT numbers
from the stable machines in the lab.
NOTE: Four clang tests are expected to fail in the brief window where
this is enabled. Sorry for the noise!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164119 91177308-0d34-0410-b5e6-96231b3b80d8
partition use lists a bit. No functionality changed.
These visitors are actually visiting a tuple of a Use and an offset into
the alloca. However, we use the InstVisitor to handle the dispatch over
the users, and so the Use and Offset are stored in class member
variables and set just before each call to visit(). This is fairly
awkward and makes the functions a bit harder to read, but its the only
real option we have until InstVisitor can be rewritten to use variadic
templates.
However, this pattern shouldn't be followed on the helper member
functions where there is no interface constraint from the visitor. We
already were passing the instruction as a normal parameter rather than
use the Use to get at it, start passing the offset as well. This will
become more important in subsequent patches as the offset will in some
cases change while visiting a single instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164003 91177308-0d34-0410-b5e6-96231b3b80d8
new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.
The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.
In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.
There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.
This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.
To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.
NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163965 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163902 91177308-0d34-0410-b5e6-96231b3b80d8
pointless checks in here, bad asserts, and just confusing code. I've
also added a bit more to the comment to clarify what this function is
really trying to do as it was not obvious to Duncan when studying it.
Thanks to Duncan for helping me dig through the issue.
No real functionality changed here in practical cases, and certainly no
test case. This is just cleanup spotted by inspection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163897 91177308-0d34-0410-b5e6-96231b3b80d8
inspection by Duncan during review. My suspicion is that we would still
have returned 0 anyways in this case, but doing it sooner is better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163895 91177308-0d34-0410-b5e6-96231b3b80d8
deeply suspicious and likely to go away eventually. Also fix a bogus
comment about one of the checks in the vector GEP analysis. Based on
review from Duncan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163894 91177308-0d34-0410-b5e6-96231b3b80d8
Originally I had anticipated needing to thread this through more bits of
the SROA pass itself, but that ended up not happening. In the end, this
is a much simpler way to manange the variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163893 91177308-0d34-0410-b5e6-96231b3b80d8
This is essentially a ground up re-think of the SROA pass in LLVM. It
was initially inspired by a few problems with the existing pass:
- It is subject to the bane of my existence in optimizations: arbitrary
thresholds.
- It is overly conservative about which constructs can be split and
promoted.
- The vector value replacement aspect is separated from the splitting
logic, missing many opportunities where splitting and vector value
formation can work together.
- The splitting is entirely based around the underlying type of the
alloca, despite this type often having little to do with the reality
of how that memory is used. This is especially prevelant with unions
and base classes where we tail-pack derived members.
- When splitting fails (often due to the thresholds), the vector value
replacement (again because it is separate) can kick in for
preposterous cases where we simply should have split the value. This
results in forming i1024 and i2048 integer "bit vectors" that
tremendously slow down subsequnet IR optimizations (due to large
APInts) and impede the backend's lowering.
The new design takes an approach that fundamentally is not susceptible
to many of these problems. It is the result of a discusison between
myself and Duncan Sands over IRC about how to premptively avoid these
types of problems and how to do SROA in a more principled way. Since
then, it has evolved and grown, but this remains an important aspect: it
fixes real world problems with the SROA process today.
First, the transform of SROA actually has little to do with replacement.
It has more to do with splitting. The goal is to take an aggregate
alloca and form a composition of scalar allocas which can replace it and
will be most suitable to the eventual replacement by scalar SSA values.
The actual replacement is performed by mem2reg (and in the future
SSAUpdater).
The splitting is divided into four phases. The first phase is an
analysis of the uses of the alloca. This phase recursively walks uses,
building up a dense datastructure representing the ranges of the
alloca's memory actually used and checking for uses which inhibit any
aspects of the transform such as the escape of a pointer.
Once we have a mapping of the ranges of the alloca used by individual
operations, we compute a partitioning of the used ranges. Some uses are
inherently splittable (such as memcpy and memset), while scalar uses are
not splittable. The goal is to build a partitioning that has the minimum
number of splits while placing each unsplittable use in its own
partition. Overlapping unsplittable uses belong to the same partition.
This is the target split of the aggregate alloca, and it maximizes the
number of scalar accesses which become accesses to their own alloca and
candidates for promotion.
Third, we re-walk the uses of the alloca and assign each specific memory
access to all the partitions touched so that we have dense use-lists for
each partition.
Finally, we build a new, smaller alloca for each partition and rewrite
each use of that partition to use the new alloca. During this phase the
pass will also work very hard to transform uses of an alloca into a form
suitable for promotion, including forming vector operations, speculating
loads throguh PHI nodes and selects, etc.
After splitting is complete, each newly refined alloca that is
a candidate for promotion to a scalar SSA value is run through mem2reg.
There are lots of reasonably detailed comments in the source code about
the design and algorithms, and I'm going to be trying to improve them in
subsequent commits to ensure this is well documented, as the new pass is
in many ways more complex than the old one.
Some of this is still a WIP, but the current state is reasonbly stable.
It has passed bootstrap, the nightly test suite, and Duncan has run it
successfully through the ACATS and DragonEgg test suites. That said, it
remains behind a default-off flag until the last few pieces are in
place, and full testing can be done.
Specific areas I'm looking at next:
- Improved comments and some code cleanup from reviews.
- SSAUpdater and enabling this pass inside the CGSCC pass manager.
- Some datastructure tuning and compile-time measurements.
- More aggressive FCA splitting and vector formation.
Many thanks to Duncan Sands for the thorough final review, as well as
Benjamin Kramer for lots of review during the process of writing this
pass, and Daniel Berlin for reviewing the data structures and algorithms
and general theory of the pass. Also, several other people on IRC, over
lunch tables, etc for lots of feedback and advice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163883 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163790 91177308-0d34-0410-b5e6-96231b3b80d8
pointers-to-strong-pointers may be in play. These can lead to retains and
releases happening in unstructured ways, foiling the optimizer. This fixes
rdar://12150909.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163180 91177308-0d34-0410-b5e6-96231b3b80d8
- CodeGenPrepare pass for identifying div/rem ops
- Backend specifies the type mapping using addBypassSlowDivType
- Enabled only for Intel Atom with O2 32-bit -> 8-bit
- Replace IDIV with instructions which test its value and use DIVB if the value
is positive and less than 256.
- In the case when the quotient and remainder of a divide are used a DIV
and a REM instruction will be present in the IR. In the non-Atom case
they are both lowered to IDIVs and CSE removes the redundant IDIV instruction,
using the quotient and remainder from the first IDIV. However,
due to this optimization CSE is not able to eliminate redundant
IDIV instructions because they are located in different basic blocks.
This is overcome by calculating both the quotient (DIV) and remainder (REM)
in each basic block that is inserted by the optimization and reusing the result
values when a subsequent DIV or REM instruction uses the same operands.
- Test cases check for the presents of the optimization when calculating
either the quotient, remainder, or both.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163150 91177308-0d34-0410-b5e6-96231b3b80d8
Scan the body of the loop and find instructions that may trap.
Use this information when deciding if it is safe to hoist or sink instructions.
Notice that we can optimize the search of instructions that may throw in the case of nested loops.
rdar://11518836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163132 91177308-0d34-0410-b5e6-96231b3b80d8
For example, the ARM target does not have efficient ISel handling for vector
selects with scalar conditions. This patch adds a TLI hook which allows the
different targets to report which selects are supported well and which selects
should be converted to CF duting codegen prepare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163093 91177308-0d34-0410-b5e6-96231b3b80d8
We update until we hit a fixpoint. This is probably slow but also
slightly simplifies the code. It should also fix the occasional
invalid domtrees observed when building with expensive checking.
I couldn't find a case where this had a measurable slowdown, but
if someone finds a pathological case where it does we may have
to find a cleverer way of updating dominators here.
Thanks to Duncan for the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163091 91177308-0d34-0410-b5e6-96231b3b80d8
The old PHI updating code in loop-rotate was replaced with SSAUpdater a while
ago, it has no problems with comples PHIs. What had to be fixed is detecting
whether a loop was already rotated and updating dominators when multiple exits
were present.
This change increases overall code size a bit, mostly due to additional loop
unrolling opportunities. Passes test-suite and selfhost with -verify-dom-info.
Fixes PR7447.
Thanks to Andy for the input on the domtree updating code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162912 91177308-0d34-0410-b5e6-96231b3b80d8
This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.
Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.
Fixes PR13694 and probably others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162841 91177308-0d34-0410-b5e6-96231b3b80d8
No intended behavior change. This was introduced in r162023. With the fixed
algorithm a Release build of ARMInstPrinter.cpp goes from 16s to 10s on a
2011 MBP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162559 91177308-0d34-0410-b5e6-96231b3b80d8
