The atomic tests assume the two-operand forms, so I've restricted them to z10.
Running and-01.ll, or-01.ll and xor-01.ll for z196 as well as z10 shows why
using convertToThreeAddress() is better than exposing the three-operand forms
first and then converting back to two operands where possible (which is what
I'd originally tried). Using the three-operand form first stops us from
taking advantage of NG, OG and XG for spills.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186683 91177308-0d34-0410-b5e6-96231b3b80d8
This first step just adds definitions for SLLK, SRLK and SRAK.
The next patch will actually make use of them during codegen.
insn-bad.s tests that some form of error is reported when using these
instructions on z10. More work is needed to get the "instruction requires:
distinct-ops" that we'd ideally like, so I've stubbed that part out for now.
I'll come back and make it mandatory once the necessary changes are in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186680 91177308-0d34-0410-b5e6-96231b3b80d8
Somehow forgot to git rm these two files. I believe I left the remaining
invalid* tests intentionally, though whether my reasons were sound is a
different matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186663 91177308-0d34-0410-b5e6-96231b3b80d8
The tests were checking for barriers which the ARM ARM says they must execute
as a full system DMB/DSB, rather than that they're UNDEFINED and LLVM does in
fact represent them.
The tests happened to be passing because they were using a non-versioned ARM
triple which didn't have *any* DMB/DSB instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186662 91177308-0d34-0410-b5e6-96231b3b80d8
This allows "llvm-mc -disassemble" to accept two new features:
+ Using comma as a byte separator
+ Grouping bytes with '[' and ']' pairs.
The behaviour outside a [...] group is unchanged. But within the group once
llvm-mc encounters a true error, it stops rather than trying to resynchronise
the stream at the next byte. This is more useful for disassembly tests, where
we have an almost-instruction in mind and don't care what the misaligned
interpretation would be. Particularly if it means llvm-mc won't actually see
the next intended almost-instruction.
As a side effect, this means llvm-mc can disassemble its own -show-encoding
output if copy-pasted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186661 91177308-0d34-0410-b5e6-96231b3b80d8
RISBG has three 8-bit operands (I3, I4 and I5). I'd originally
restricted all three to 6 bits, since that's the only range we intended
to use at the time. However, the top bit of I4 acts as a "zero" flag for
RISBG, while the top bit of I3 acts as a "test" flag for RNSBG & co.
This patch therefore allows them to have the full 8-bit range.
I've left the fifth operand as a 6-bit value for now since the
upper 2 bits have no defined meaning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186070 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new decoder table/namespace 'VFPV8', as these instructions have their
top 4 bits as 0b1111, while other Thumb instructions have 0b1110.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185642 91177308-0d34-0410-b5e6-96231b3b80d8
1. it should accept only 4-byte aligned addresses
2. the maximum offset should be 1020
3. it should be encoded with the offset scaled by two bits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185528 91177308-0d34-0410-b5e6-96231b3b80d8
Create a dedicated register class for floating point condition code registers and
move FCC0 from register class CCR to the new register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185373 91177308-0d34-0410-b5e6-96231b3b80d8
function to lookup the proper tablegen'ed register enumeration. Previously,
it was using the encoded value directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185026 91177308-0d34-0410-b5e6-96231b3b80d8
When encoded to thumb, VFP instruction and VMOV/VDUP between scalar and
core registers, must have their predicate bit to 0b1110.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184707 91177308-0d34-0410-b5e6-96231b3b80d8
In thumb1, NOP is a pseudo-instruction equivalent to mov r8, r8.
However the disassembler should not use this alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184703 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit tricky as the xacquire and xrelease hints use the same bytes,
0xf2 and 0xf3, as the repne and rep prefixes.
Fortunately llvm has different llvm MCInst Opcode enums for rep/xrelease
and repne/xacquire. So to make this work a boolean was added the
InternalInstruction struct as part of the Prefix state which is set with the
added logic in readPrefixes() when decoding an instruction to determine
if these prefix bytes are to be disassembled as xacquire or xrelease. Then
we let the matcher pick the normal prefix instructionID and we change the
Opcode after that when it is set into the MCInst being created.
rdar://11019859
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184490 91177308-0d34-0410-b5e6-96231b3b80d8
The cdp2 instruction should have the same restrictions as cdp on the
co-processor registers.
VFP instructions on v8/AArch32 share the same encoding space as cdp2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184445 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes two previous issues:
- Negative offsets were not correctly disassembled
- The decoded opcodes were not the right one
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184180 91177308-0d34-0410-b5e6-96231b3b80d8
Handle the case when the disassembler table can't tell
the difference between some encodings of QADD and CPS.
Add some necessary safe guards in CPS decoding as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183610 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are deprecated oddities, but we still need to be able to
disassemble (and reassemble) them if and when they're encountered.
Patch by Amaury de la Vieuville.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183011 91177308-0d34-0410-b5e6-96231b3b80d8
The disassembly of VEXT instructions was too lax in the bits checked. This
fixes the case where the instruction affects Q-registers but a misaligned lane
was specified (should be UNDEFINED).
Patch by Amaury de la Vieuville
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183003 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the CRJ and CGRJ instructions. Support for
the immediate forms will be a separate patch.
The architecture has a large number of comparison instructions. I think
it's generally better to concentrate on using the "best" comparison
instruction first and foremost, then only use something like CRJ if
CR really was the natual choice of comparison instruction. The patch
therefore opportunistically converts separate CR and BRC instructions
into a single CRJ while emitting instructions in ISelLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182764 91177308-0d34-0410-b5e6-96231b3b80d8
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179266 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
At the time when the XCore backend was added there were some issues with
with overlapping register classes but these all seem to be fixed now.
Describing the register classes correctly allow us to get rid of a
codegen only instruction (LDAWSP_lru6_RRegs) and it means we can
disassemble ru6 instructions that use registers above r11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178782 91177308-0d34-0410-b5e6-96231b3b80d8
If PC or SP is the destination, the disassembler erroneously failed with the
invalid encoding, despite the manual saying that both are fine.
This patch addresses failure to decode encoding T4 of LDR (A8.8.62) which is a
postindexed load, where the offset 0xc is applied to SP after the load occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178017 91177308-0d34-0410-b5e6-96231b3b80d8
The work done by the post-encoder (setting architecturally unused bits to 0 as
required) can be done by the existing operand that covers the "#0.0". This
removes at least one use of the discouraged PostEncoderMethod uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176261 91177308-0d34-0410-b5e6-96231b3b80d8
The Printer will now print instructions with the correct alignment specifier syntax, like
vld1.8 {d16}, [r0:64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175884 91177308-0d34-0410-b5e6-96231b3b80d8
The parser will now accept instructions with alignment specifiers written like
vld1.8 {d16}, [r0:64]
, while also still accepting the incorrect syntax
vld1.8 {d16}, [r0, :64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175164 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are a late addition to the architecture, and may
yet end up behind an optional attribute, but for now they're available
at all times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174496 91177308-0d34-0410-b5e6-96231b3b80d8
This adds hints to the various "prfm" instructions so that they can
affect the instruction cache as well as the data cache.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174495 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
It is not possible to distinguish 3r instructions from 2r / rus instructions
using only the fixed bits. Therefore if an instruction doesn't match the
2r / rus format try to decode it as a 3r instruction before returning Fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172984 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172685 91177308-0d34-0410-b5e6-96231b3b80d8
Hope you are feeling better.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172579 91177308-0d34-0410-b5e6-96231b3b80d8
cvtsi2* should parse with an 'l' or 'q' suffix or no suffix at all. No suffix should be treated the same as 'l' suffix. Printing should always print a suffix. Previously we didn't parse or print an 'l' suffix.
cvtt*2si/cvt*2si should parse with an 'l' or 'q' suffix or not suffix at all. No suffix should use the destination register size to choose encoding. Printing should not print a suffix.
Original 'l' suffix issue with cvtsi2* pointed out by Michael Kuperstein.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171668 91177308-0d34-0410-b5e6-96231b3b80d8
This is for the lldb team so most of but not all of the values are
to be printed as hex with this option. Some small values like the
scale in an X86 address were requested to printed in decimal
without the leading 0x.
There may be some tweaks need to places that may still be in
decimal that they want in hex. Specially for arm. I made my best
guess. Any tweaks from here should be simple.
I also did the best I know now with help from the C++ gurus
creating the cleanest formatImm() utility function and containing
the changes. But if someone has a better idea to make something
cleaner I'm all ears and game for changing the implementation.
rdar://8109283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169393 91177308-0d34-0410-b5e6-96231b3b80d8
It currently assumes register numbering and any harmless change in the X86
register naming makes it fail. It's enough to match the register names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168632 91177308-0d34-0410-b5e6-96231b3b80d8
When the operand is a plain immediate rather than a label, print it
as [pc, #imm] like we do for the Thumb2 wide encoding variant.
rdar://12154503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166991 91177308-0d34-0410-b5e6-96231b3b80d8
is 24 bits not 20 and the decoding needed to correctly handle converting the
J1 and J2 bits to their I1 and I2 values to reconstruct the displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166982 91177308-0d34-0410-b5e6-96231b3b80d8
Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166445 91177308-0d34-0410-b5e6-96231b3b80d8
Access mips register classes via MCRegisterInfo's functions instead of via the
TargetRegisterClasses defined in MipsGenRegisterInfo.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159953 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
Corrected type for index of llvm.x86.avx2.gather.d.pd.256
from 256-bit to 128-bit.
Corrected types for src|dst|mask of llvm.x86.avx2.gather.q.ps.256
from 256-bit to 128-bit.
Support the following intrinsics:
llvm.x86.avx2.gather.d.q, llvm.x86.avx2.gather.q.q
llvm.x86.avx2.gather.d.q.256, llvm.x86.avx2.gather.q.q.256
llvm.x86.avx2.gather.d.d, llvm.x86.avx2.gather.q.d
llvm.x86.avx2.gather.d.d.256, llvm.x86.avx2.gather.q.d.256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159402 91177308-0d34-0410-b5e6-96231b3b80d8
that are generated by TableGen and are already available in
MipsGenRegisterInfo.inc. Suggested by Jakob Stoklund Olesen.
Also, fix bug in function DecodeAFGR64RegisterClass.
Patch by Vladimir Medic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158846 91177308-0d34-0410-b5e6-96231b3b80d8
This required light surgery on the assembler and disassembler
because the instructions use an uncommon encoding. They are
the only two instructions in x86 that use register operands
and two immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157634 91177308-0d34-0410-b5e6-96231b3b80d8
for the assembler and disassembler. Which were not being set/read correctly
for offsets greater than 22 bits in some cases.
Changes to lib/Target/ARM/ARMAsmBackend.cpp from Gideon Myles!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156118 91177308-0d34-0410-b5e6-96231b3b80d8
instructions with writebacks. And add test a case for all opcodes handed by
DecodeVLD2DupInstruction() in ARMDisassembler.cpp .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154884 91177308-0d34-0410-b5e6-96231b3b80d8
The test change is to account for the fact that the default disassembler behaviour has changed with regards to specifying the assembly syntax to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154809 91177308-0d34-0410-b5e6-96231b3b80d8
1. The new instruction itinerary entries are not properly described.
2. The asm parser can't handle vfms and vfnms.
3. There were no assembler, disassembler test cases.
4. HasNEON2 has the wrong assembler predicate.
rdar://10139676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154456 91177308-0d34-0410-b5e6-96231b3b80d8
* Removed test/lib/llvm.exp - it is no longer needed
* Deleted the dg.exp reading code from test/lit.cfg. There are no dg.exp files
left in the test suite so this code is no longer required. test/lit.cfg is
now much shorter and clearer
* Removed a lot of duplicate code in lit.local.cfg files that need access to
the root configuration, by adding a "root" attribute to the TestingConfig
object. This attribute is dynamically computed to provide the same
information as was previously provided by the custom getRoot functions.
* Documented the config.root attribute in docs/CommandGuide/lit.pod
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153408 91177308-0d34-0410-b5e6-96231b3b80d8
Work in progress. Parsing for non-writeback, single spaced register lists
works now. The rest have the representations better factored, but still
need more to be able to parse properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146579 91177308-0d34-0410-b5e6-96231b3b80d8
