complete the plumbing of passing TargetRegisterInfo through
computeRegisterProperties started by r230583
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230858 91177308-0d34-0410-b5e6-96231b3b80d8
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230845 91177308-0d34-0410-b5e6-96231b3b80d8
Straightforward patch to emit an alignment directive when emitting a
TOC entry. The test case was generated from the test in PR22711 that
demonstrated a misaligned .toc section. The object code is run
through llvm-readobj to verify that the correct alignment has been
applied to the .toc section.
Thanks to Ulrich Weigand for running down where the fix was needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230801 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Until now, we did this (among other things) based on whether or not the
target was Windows. This is clearly wrong, not just for Win64 ABI functions
on non-Windows, but for System V ABI functions on Windows, too. In this
change, we make this decision based on the ABI the calling convention
specifies instead.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230793 91177308-0d34-0410-b5e6-96231b3b80d8
When using Altivec, we can use vector loads and stores for aligned memcpy and
friends. Starting with the P7 and VXS, we have reasonable unaligned vector
stores. Starting with the P8, we have fast unaligned loads too.
For QPX, we use vector loads are stores, but only for aligned memory accesses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230788 91177308-0d34-0410-b5e6-96231b3b80d8
vectors. This lets us fix the rest of the v16 lowering problems when
pshufb is clearly better.
We might still be able to improve some of the lowerings by enabling the
other combine-based rewriting to fire for non-128-bit vectors, but this
at least should remove any regressions from using the fancy v16i16
lowering strategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230753 91177308-0d34-0410-b5e6-96231b3b80d8
repeated 128-bit lane shuffles of wider vector types and use it to lower
256-bit v16i16 vector shuffles where applicable.
This should let us perfectly lowering the pattern of pshuflw and pshufhw
even for AVX2 256-bit patterns.
I've not added AVX-512 support, but it should be trivial for someone
working on that to wire up.
Note that currently this generates bad, long shuffle chains because we
don't combine 256-bit target shuffles. The subsequent patches will fix
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230751 91177308-0d34-0410-b5e6-96231b3b80d8
going back through the entire vector shuffle lowering.
This is an important step to being able to re-use this logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230743 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We identify the cases where the operand to an ADDE node is a constant
zero. In such cases, we can avoid generating an extra ADDu instruction
disguised as an identity move alias (ie. addu $r, $r, 0 --> move $r, $r).
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230742 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change causes us to actually save non-volatile registers in a Win64
ABI function that calls a System V ABI function, and vice-versa.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230714 91177308-0d34-0410-b5e6-96231b3b80d8
uses of TM->getSubtargetImpl and propagate to all calls.
This could be a debugging regression in places where we had a
TargetMachine and/or MachineFunction but don't have it as part
of the MachineInstr. Fixing this would require passing a
MachineFunction/Function down through the print operator, but
none of the existing uses in tree seem to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230710 91177308-0d34-0410-b5e6-96231b3b80d8
a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230699 91177308-0d34-0410-b5e6-96231b3b80d8
blend as legal.
We made the same mistake in two different places. Whenever we are custom
lowering a v32i8 blend we need to check whether we are custom lowering
it only for constant conditions that can be shuffled, or whether we
actually have AVX2 and full dynamic blending support on bytes. Both are
fixed, with comments added to make it clear what is going on and a new
test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230695 91177308-0d34-0410-b5e6-96231b3b80d8
dynamic blends.
This makes it much more clear what is going on. The case we're handling
is that of dynamic conditions, and we're bailing when the nature of the
vector types and subtarget preclude lowering the dynamic condition
vselect as an actual blend.
No functionality changed here, but this will make a subsequent bug-fix
to this code much more clear.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230690 91177308-0d34-0410-b5e6-96231b3b80d8
change functionality, but makes it more clear that the dynamic case and
the shuffle case don't overlap in any interesting way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230689 91177308-0d34-0410-b5e6-96231b3b80d8
In case of "krait" CPU, asm printer doesn't emit any ".cpu" so the
features bits are not computed. This patch lets the asm printer
emit ".cpu cortex-a9" directive for krait and the hwdiv feature is
enabled through ".arch_extension". In short, krait is treated
as "cortex-a9" with hwdiv. We can not emit ".krait" as CPU since
it is not supported bu GNU GAS yet
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230651 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is in response to r223147 where the avaiable features are
computed based on ".cpu" directive. This will work clean for the standard
variants like cortex-a9. For custom variants which rely on standard cpu names
for assembly, the additional features of a CPU should be propagated. This can be
done via ".arch_extension" as long as the assembler supports it. The
implementation for krait along with unit test will be submitted in next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230650 91177308-0d34-0410-b5e6-96231b3b80d8
The latency for the WriteMULm class was set to 4, which is actually lower than the latency for WriteMULr (5).
A better estimate would be 4 added to WriteMULr, that is, 9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230634 91177308-0d34-0410-b5e6-96231b3b80d8
formulaic into the top v8i16 lowering routine.
This makes the generalized lowering a completely general and single path
lowering which will allow generalizing it in turn for multiple 128-bit
lanes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230623 91177308-0d34-0410-b5e6-96231b3b80d8
It still prints "Assembling path/to/X86CompilationCallback_Win64.asm",
but linking does the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230596 91177308-0d34-0410-b5e6-96231b3b80d8
Explanation: This function is in TargetLowering because it uses
RegClassForVT which would need to be moved to TargetRegisterInfo
and would necessitate moving isTypeLegal over as well - a massive
change that would just require TargetLowering having a TargetRegisterInfo
class member that it would use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230585 91177308-0d34-0410-b5e6-96231b3b80d8
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230583 91177308-0d34-0410-b5e6-96231b3b80d8
LDtocL, and other loads that roughly correspond to the TOC_ENTRY SDAG node,
represent loads from the TOC, which is invariant. As a result, these loads can
be hoisted out of loops, etc. In order to do this, we need to generate
GOT-style MMOs for TOC_ENTRY, which requires treating it as a legitimate memory
intrinsic node type. Once this is done, the MMO transfer is automatically
handled for TableGen-driven instruction selection, and for nodes generated
directly in PPCISelDAGToDAG, we need to transfer the MMOs manually.
Also, we were not transferring MMOs associated with pre-increment loads, so do
that too.
Lastly, this fixes an exposed bug where R30 was not added as a defined operand of
UpdateGBR.
This problem was highlighted by an example (used to generate the test case)
posted to llvmdev by Francois Pichet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230553 91177308-0d34-0410-b5e6-96231b3b80d8
The Win64 epilogue structure is very restrictive, it permits a very
small number of opcodes and none of them are 'mov'.
This means that given:
mov %rbp, %rsp
pop %rbp
The mov isn't the epilogue, only the pop is. This is problematic unless
a frame pointer is present in which case we are free to do whatever we'd
like in the "body" of the function. If a frame pointer is present,
unwinding will undo the prologue operations in reverse order regardless
of the fact that we are at an instruction which is reseting the stack
pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230543 91177308-0d34-0410-b5e6-96231b3b80d8
We had somehow accumulated a few target-specific SDAG nodes dealing with PPC64
TOC access that were referenced only in TableGen patterns. The associated
(pseudo-)instructions are used, but are being generated directly. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230518 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r230248.
Teach the peephole optimizer to work with MMX instructions by adding
entries into the foldable tables. This covers folding opportunities not
handled during isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230499 91177308-0d34-0410-b5e6-96231b3b80d8
MMX_MOVD64rm zero-extends i32 load results into i64 registers.
The peephole optimizer will try to fold it in other MMX foldable
instructions, the wrong thing to do, since there's no MMX memory
instruction that loads from i32 and does implict zero extension.
Remove 'canFoldAsLoad' from MOVD64rm in order to prevent such folding.
The current MMX tests already test this, but since there are no MMX
instructions in the foldable tables yet, this did not trigger. This
commit prepares the addition of those instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230498 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb-1 only allows SP-based LDR and STR to be word-sized, and SP-base LDR,
STR, and ADD only allow offsets that are a multiple of 4. Make some changes
to better make use of these instructions:
* Use word loads for anyext byte and halfword loads from the stack.
* Enforce 4-byte alignment on objects accessed in this way, to ensure that
the offset is valid.
* Do the same for objects whose frame index is used, in order to avoid having
to use more than one ADD to generate the frame index.
* Correct how many bits of offset we think AddrModeT1_s has.
Patch by John Brawn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230496 91177308-0d34-0410-b5e6-96231b3b80d8
