EXTRACT_SUBREG is emitted as %dst = COPY %src:sub, so there is no need to
constrain the %dst register class. RegisterCoalescer will apply the
necessary constraints if it decides to eliminate the COPY.
The %src register class does need to be constrained to something with
the right sub-registers, though. This is currently done manually with
COPY_TO_REGCLASS nodes. They can possibly be removed after this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141207 91177308-0d34-0410-b5e6-96231b3b80d8
The register class created by INSERT_SUBREG and SUBREG_TO_REG must be
legal and support the SubIdx sub-registers.
The new getSubClassWithSubReg() hook can compute that.
This may create INSERT_SUBREG instructions defining a larger register
class than the sub-register being inserted. That is OK,
RegisterCoalescer will constrain the register class as needed when it
eliminates the INSERT_SUBREG instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141198 91177308-0d34-0410-b5e6-96231b3b80d8
TwoAddressInstructionPass should annotate instructions with <undef>
flags when it lower REG_SEQUENCE instructions. LiveIntervals should not
be in the business of modifying code (except for kill flags, perhaps).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141187 91177308-0d34-0410-b5e6-96231b3b80d8
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
is rewritten as:
%D2<def> = COPY %D0, %Q1<imp-def>
%D3<def> = COPY %D1, %Q1<imp-use,kill>, %Q1<imp-def>
The first COPY doesn't care about the previous value of %Q1, so it
doesn't read that register.
The second COPY is a partial redefinition of %Q1, so it implicitly kills
and redefines that register.
This makes it possible to recognize instructions that can harmlessly
clobber the full super-register. The write and don't read the
super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141139 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer can create sub-register defs when it is joining a
register with a sub-register. Add <undef> flags to these new
sub-register defs where appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141138 91177308-0d34-0410-b5e6-96231b3b80d8
The <undef> flag says that a MachineOperand doesn't read its register,
or doesn't depend on the previous value of its register.
A full register def never depends on the previous register value. A
partial register def may depend on the previous value if it is intended
to update part of a register.
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
The first copy instruction defines the full %vreg10 register with the
bits not covered by dsub_0 defined as <undef>. It is not considered a
read of %vreg10.
The second copy modifies part of %vreg10 while preserving the rest. It
has an implicit read of %vreg10.
This patch adds a MachineOperand::readsReg() method to determine if an
operand reads its register.
Previously, this was modelled by adding a full-register <imp-def>
operand to the instruction. This approach makes it possible to
determine directly from a MachineOperand if it reads its register. No
scanning of MI operands is required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141124 91177308-0d34-0410-b5e6-96231b3b80d8
and the alignment is 0 (i.e., it's defined globally in one file and declared in
another file) it could get an alignment which is larger than the ABI allows for
that type, resulting in aligned moves being used for unaligned loads.
For instance, in file A.c:
struct S s;
In file B.c:
struct {
// something long
};
extern S s;
void foo() {
struct S p = s;
// ...
}
this copy is a 'memcpy' which is turned into a series of 'movaps' instructions
on X86. But this is wrong, because 'struct S' has alignment of 4, not 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140902 91177308-0d34-0410-b5e6-96231b3b80d8
This helps with porting code from 2.9 to 3.0 as TargetSelect.h changed location,
and if you include the old one by accident you will trigger this assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140848 91177308-0d34-0410-b5e6-96231b3b80d8
The function needs to scan the implicit operands anyway, so no
performance is won by caching the number of implicit operands added to
an instruction.
This also fixes a bug when adding operands after an implicit operand has
been added manually. The NumImplicitOps count wasn't kept up to date.
MachineInstr::addOperand() will now consistently place all explicit
operands before all the implicit operands, regardless of the order they
are added. It is possible to change an MI opcode and add additional
explicit operands. They will be inserted before any existing implicit
operands.
The only exception is inline asm instructions where operands are never
reordered. This is because of a hack that marks explicit clobber regs
on inline asm as <implicit-def> to please the fast register allocator.
This hack can go away when InstrEmitter and FastIsel can add exact
<dead> flags to physreg defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140744 91177308-0d34-0410-b5e6-96231b3b80d8
Upon further review, most of the EH code should remain written at the IR
level. The part which breaks SSA form is the dispatch table, so that part will
be moved to the back-end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140730 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is used to pass the index of the function context to the back-end
for further processing. The back-end is in charge of filling in the rest of the
entries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140676 91177308-0d34-0410-b5e6-96231b3b80d8
The DWARF exception pass uses the call site information, which is set up here. A
pre-RA pass is too late for it to use this information. So create and setup the
function context here, and then insert the call site values here (and map the
call sites for the DWARF EH pass). This is simpler than the original pass, and
doesn't make the CFG lose its SSA-ness.
It's a win-win-win-win-lose-win-win situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140675 91177308-0d34-0410-b5e6-96231b3b80d8
current IR-level pass.
The old SjLj EH pass has some problems, especially with the new EH model. Most
significantly, it violates some of the new restrictions the new model has. For
instance, the 'dispatch' table wants to jump to the landing pad, but we cannot
allow that because only an invoke's unwind edge can jump to a landing pad. This
requires us to mangle the code something awful. In addition, we need to keep the
now dead landingpad instructions around instead of CSE'ing them because the
DWARF emitter uses that information (they are dead because no control flow edge
will execute them - the control flow edge from an invoke's unwind is superceded
by the edge coming from the dispatch).
Basically, this pass belongs not at the IR level where SSA is king, but at the
code-gen level, where we have more flexibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140646 91177308-0d34-0410-b5e6-96231b3b80d8
Many targets use pseudo instructions to help register allocation. Like
the COPY instruction, these pseudos can be expanded after register
allocation. The early expansion can make life easier for PEI and the
post-ra scheduler.
This patch adds a hook that is called for all remaining pseudo
instructions from the ExpandPostRAPseudos pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140472 91177308-0d34-0410-b5e6-96231b3b80d8
SDNodes may return values which are wider than the incoming element types. In
this patch we fix the integer promotion of these nodes.
Fixes spill-q.ll when running -promote-elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140471 91177308-0d34-0410-b5e6-96231b3b80d8
I'll fix the file contents in the next commit.
This pass is currently expanding the COPY and SUBREG_TO_REG pseudos. I
am going to add a hook so targets can expand more pseudo-instructions
after register allocation.
Many targets have pseudo-instructions that assist the register
allocator. They can be expanded after register allocation, before PEI
and PostRA scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140469 91177308-0d34-0410-b5e6-96231b3b80d8
(this is always the case for scalars), otherwise use the promoted result type.
Fix test/CodeGen/X86/vsplit-and.ll when promote-elements is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140464 91177308-0d34-0410-b5e6-96231b3b80d8
When generating the trunc-store of i1's, we need to use the vector type and not
the scalar type.
This patch fixes the assertion in CodeGen/Generic/bool-vector.ll when
running with -promote-elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140463 91177308-0d34-0410-b5e6-96231b3b80d8
DecomposeMERGE_VALUES to "know" that results are legalized in
a particular order, by passing it the number of the result
being legalized (the type legalization core provides this, it
just needs to be passed on).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140373 91177308-0d34-0410-b5e6-96231b3b80d8
