sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler
allows for these instructions. Done differently than in r117031 that
caused a valgrind error which was later reverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117433 91177308-0d34-0410-b5e6-96231b3b80d8
will accept versions that the darwin assembler allows. Forms ending in "pi" and
forms without all the operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117427 91177308-0d34-0410-b5e6-96231b3b80d8
sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler allows
for these instructions. Also added the missing flex (without the wait prefix)
and ud2a as an alias to ud2 (still to add ud2b).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117031 91177308-0d34-0410-b5e6-96231b3b80d8
word forms and suffixed versions to match the darwin assembler in 32-bit and
64-bit modes. This is again for use just with assembly source for llvm-mc .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116773 91177308-0d34-0410-b5e6-96231b3b80d8
be more complete. These are only expected to be used by llvm-mc with assembly
source so there is no pattern, [], in the .td files. Most are being added to
X86InstrInfo.td as Chris suggested and only comments about register uses are
added. Suggestions welcome on the .td changes as I'm not sure on every detail
of the x86 records. More missing instructions will be coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116716 91177308-0d34-0410-b5e6-96231b3b80d8
1) Changed ValidateDwarfFileNumber() to isValidDwarfFileNumber() to be better
named. Since it is just a predicate and isn't actually changing any state.
2) Added a missing return in the comments for setCurrentDwarfLoc() in
include/llvm/MC/MCContext.h for fix formatting.
3) Changed clearDwarfLocSeen() to ClearDwarfLocSeen() since it does change
state.
4) Simplified the last test in isValidDwarfFileNumber() to just a one line
boolean test of MCDwarfFiles[FileNumber] != 0 for the final return statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115551 91177308-0d34-0410-b5e6-96231b3b80d8
where both symbols are "local", that is non-external symbols, and there is
no "base" for the symbols used in the expression, that is the section has
no non-temporary symbols. This case looks like this:
% cat local_reloc_A-B.s
.long 0
LB: .long 1
.long LA - LB - 4
.long 2
LA: .long 3
which llvm-mc will not encode without this patch, generates a "unsupported
local relocations in difference" error, but the Darwin assembler will
encode with relocation entries like this:
% otool -rv a.out l.out
a.out:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long False SUB False 1 (__TEXT,__text)
00000008 False long False UNSIGND False 1 (__TEXT,__text)
which is very similar to what is encoded when the symbols don't have the
leading 'L' and they are not temporary symbols. Which llvm-mc and the
Darwin assembler will encoded like this:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long True SUB False B
00000008 False long True UNSIGND False A
This is the missing relocation encoding needed to allow the Mach-O x86
Dwarf file and line table to be emitted. So this patch also removes the
TODO from the if() statement in MCMachOStreamer::Finish() that didn't
call MCDwarfFileTable::Emit() for 64-bit targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115389 91177308-0d34-0410-b5e6-96231b3b80d8
and output the dwarf line number tables. This contains the code to emit and
encode the dwarf line tables from the previously gathered information in the
MCLineSection objects. This contains all the details to encode the line and
address deltas into the dwarf line table.
To do this an MCDwarfLineAddrFragment has been added.
Also this moves the interface code out of Mach-O streamer into
MCDwarf so it should be useable by other object file formats.
There is now one call to be made from an MCObjectStreamer
EmitInstruction() method:
MCLineEntry::Make(this, getCurrentSection());
to create a line entry after each instruction is assembled.
And one call call to be made from an MCObjectStreamer Finish() method:
MCDwarfFileTable::Emit(this, DwarfLineSection);
when getContext().hasDwarfFiles() is true and is passed a object file specific
MCSection where to emit the dwarf file and the line tables.
This appears to now be correct for 32-bit targets, at least x86. But the
relocation entries for 64-bit Darwin needs some further work which is next
up to work on. So for now the 64-bit Mach-O target does not output the
dwarf file and line tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115157 91177308-0d34-0410-b5e6-96231b3b80d8
if we are given a Layout object, even in cases when the value is not fixed.
This will be needed by the final patch for the dwarf .loc support to size a
new MCDwarf fragment needed to build and emit dwarf line number tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115155 91177308-0d34-0410-b5e6-96231b3b80d8
and output the dwarf line number tables. This takes the current loc info after
an instruction is assembled and saves the needed info into an object that has
vector and for each section. These objects will be used for the final patch to
build and emit the encoded dwarf line number tables. Again for now this is only
in the Mach-O streamer but at some point will move to a more generic place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112668 91177308-0d34-0410-b5e6-96231b3b80d8
needed parsing for the .loc directive and saves the current info from that
into the context. The next patch will take the current loc info after an
instruction is assembled and save that info into a vector for each section for
use to build the line number tables. The patch after that will encode the info
from those vectors into the output file as the dwarf line tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111956 91177308-0d34-0410-b5e6-96231b3b80d8
previously collected info from the .file directives and outputs the encoded
bytes for it. For now this is only in the Mach-O streamer but at some point
will move to a more generic place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110617 91177308-0d34-0410-b5e6-96231b3b80d8
the info from the .file directive and makes file and directory tables that
will eventually be put out as part of the dwarf info in the output file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109651 91177308-0d34-0410-b5e6-96231b3b80d8
.weak_def_can_be_hidden directive. Chris pointed out that the MCAsmInfo.h/.cpp
chunks aren't needed for this until the compiler starts generating these. And
when that happens it will be more convenient for it to be a bool than a const
char*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107906 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. Added the 64-bit version "jrcxz" so it is recognized and also
added the checks for incorrect uses of "jcxz" in 64-bit mode and "jrcxz" in
32-bit mode. Still to do is to correctly handle the encoding of the
instruction adding the Address-size override prefix byte, 0x67, when the width
of the count register is not the same as the mode the machine is running in.
Which for example means the encoding of "jecxz" depends if you are assembling
as a 32-bit target or a 64-bit target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105661 91177308-0d34-0410-b5e6-96231b3b80d8
are st(0). These can be encoded using an opcode for storing in st(0) or using
an opcode for storing in st(i), where i can also be 0. To allow testing with
the darwin assembler and get a matching binary the opcode for storing in st(0)
is now used. To do this the same logical trick is use from the darwin assembler
in converting things like this:
fmul %st(0), %st
into this:
fmul %st(0)
by looking for the second operand being X86::ST0 for specific floating point
mnemonics then removing the second X86::ST0 operand. This also has the add
benefit to allow things like:
fmul %st(1), %st
that llvm-mc did not assemble.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104634 91177308-0d34-0410-b5e6-96231b3b80d8
CurPtr[0] == '\n' when testing the character after a "0b" when looking
to see if it part of a something like "jmp 0b".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104039 91177308-0d34-0410-b5e6-96231b3b80d8
correctly. The Lexer was incorrectly eating the newline casusing it to branch
to address 0. Updated the test case to use a "0:" label and a branch to "0b".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104038 91177308-0d34-0410-b5e6-96231b3b80d8
instructions as the Mac OS X darwin assembler. Some of which like 'fcoml'
assembled to different opcodes. While some of the suffixes were just different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102958 91177308-0d34-0410-b5e6-96231b3b80d8
caused the a pushl instruction to be incorrectly encoding using only two bytes
of immediate, causing the following 2 instruction bytes to be part of the 32-bit
immediate value. Also fixed the one byte form of push to be used when the
immediate would fit in a signed extended byte. Lastly changed the names to not
include the 32 of PUSH32 since they actually push the size of the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102951 91177308-0d34-0410-b5e6-96231b3b80d8
not get an "Unknown immediate size" assert failure when used. All instructions
of this form have an 8-bit immediate. Also added a test case of an example
instruction that is of this form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99435 91177308-0d34-0410-b5e6-96231b3b80d8
override prefix and only the r/m16 forms should have had that. Also for variant
one, the AT&T syntax, added suffixes to all forms. Also added the missing
64-bit form for 'CRC32 r64, r/m8'. Plus added test cases for all forms and
tweaked one test case to add the needed suffixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98980 91177308-0d34-0410-b5e6-96231b3b80d8
section with TextAlignFillValue and calls EmitCodeAlignment() instead of
calling EmitValueToAlignment(). This allows x86 assembly code to be aligned
with optimal nops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97158 91177308-0d34-0410-b5e6-96231b3b80d8
With the compiler changed to use EmitCodeAlignment() it does change the
functionality. But X86 assembly code assembled with llvm-mc does not change
its output. For that we will eventually change the assembler frontend to
detect a '.align x, 0x90' when used in a section that 'hasInstructions' and use
EmitCodeAlignment, but will wait until we have better target hooks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96988 91177308-0d34-0410-b5e6-96231b3b80d8
to be aligned with optimal nops. This patch does not change any functionality
and when the compiler is changed to use EmitCodeAlignment() it should also not
change the resulting output. Once the compiler change is made and everything
looks good the next patch with the table of optimal X86 nops will be added to
WriteNopData() changing the output. There are many FIXMEs in this patch which
will be removed when we have better target hooks (coming soon I hear).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96963 91177308-0d34-0410-b5e6-96231b3b80d8
containing the subset of the full auto generated test case that currently
encodes correctly. Again it is useful as we bring up the the new encoder
to make sure currently working stuff stays working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95791 91177308-0d34-0410-b5e6-96231b3b80d8
Lock prefix, Repeat string operation prefixes and the Segment override prefixes.
Also added versions of the move string and store string instructions without the
repeat prefixes to X86InstrInfo.td. And finally marked the rep versions of
move/store string records in X86InstrInfo.td as isCodeGenOnly = 1 so tblgen is
happy building the disassembler files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95252 91177308-0d34-0410-b5e6-96231b3b80d8
This test case is different subset of the full auto generated test case, and a
larger subset that is in x86_32-bit.s (that set will encode correctly). These
instructions can pass though llvm-mc as it were a logical cat(1) and then
reassemble to the same instruction. It is useful as we bring up the parser and
matcher so we don't break things that currently work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95107 91177308-0d34-0410-b5e6-96231b3b80d8
Daniel Dunbar.
- Reordered the fields in the ARMOperand Mem struct to make the struct smaller.
Making bool's into 1 bit fields and put the MCExpr* fields adjacent to each
other.
- Fixed a number of places in ARMAsmParser.cpp so they have doxygen comments.
- Change the name of ARMAsmParser::ParseRegister() to MaybeParseRegister and
added the bool ParseWriteBack parameter.
- Changed ARMAsmParser::ParseMemory() to call MaybeParseRegister().
- Added ARMAsmParser::ParseMemoryOffsetReg to factor out parsing the offset of a
memory operand. And use it for both parsing both preindexed and post indexing
addressing forms in ARMAsmParser::ParseMemory.
- Changed the first argument to ParseShift() to a reference.
- Changed ParseShift() to check for Rrx first and return to reduce nesting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85632 91177308-0d34-0410-b5e6-96231b3b80d8
as expressions, code for parsing a few arm specific directives (still needs
the MCStreamer calls for these). Some clean up of the operand parsing code
and adding some comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84201 91177308-0d34-0410-b5e6-96231b3b80d8
Also fixed a couple of coding style things that crept in. And added more
to the temporary hacked up ARMAsmParser::MatchInstruction() method for testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84040 91177308-0d34-0410-b5e6-96231b3b80d8
lists. Changed ARMAsmParser::MatchRegisterName to return -1 instead of 0 on
errors so 0-15 values could be returned as register numbers. Also added the
rest of the arm register names to the currently hacked up version to allow more
testing. Some changes to ARMAsmParser::ParseOperand to give different errors
for things not yet supported and some additions to the hacked
ARMAsmParser::MatchInstruction to allow more testing for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83673 91177308-0d34-0410-b5e6-96231b3b80d8
that a symbol stub section with no attributes can be parsed as in:
.section __TEXT,__picsymbolstub4,symbol_stubs,none,16
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83488 91177308-0d34-0410-b5e6-96231b3b80d8
with writeback, things like "sp!", etc. Also added some more stuff to the
temporarily hacked methods ARMAsmParser::MatchRegisterName and
ARMAsmParser::MatchInstruction to allow more parser testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83477 91177308-0d34-0410-b5e6-96231b3b80d8
operands. Some parsing of arm memory operands for preindexing and postindexing
forms including with register controled shifts. This is a work in progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83424 91177308-0d34-0410-b5e6-96231b3b80d8
isAtStartOfComment and using that instead in two places where a loop
to check if the char was in MAI.getCommentString().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82059 91177308-0d34-0410-b5e6-96231b3b80d8
parses the .word directive as 4 bytes and ARMAsmParser::ParseInstruction will
give an error is called. Broke out the test of the .word directive into two
different test cases, one for x86 and one for arm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81817 91177308-0d34-0410-b5e6-96231b3b80d8
that things like .word can be parsed as target specific. Moved parsing .word
out of AsmParser.cpp into X86AsmParser.cpp as it is 2 bytes on X86 and 4 bytes
for other targets that support the .word directive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81461 91177308-0d34-0410-b5e6-96231b3b80d8
supporting other targets. Changed the code to pass MCAsmInfo to the parser
and the lexer. Then changed the lexer to use CommentString from MCAsmInfo
instead of a literal '#' character.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81046 91177308-0d34-0410-b5e6-96231b3b80d8
from MCAsmLexer.h in preparation of supporting other targets. Changed the
X86AsmParser code to reflect this by removing AsmLexer::LexPercent and looking
for AsmToken::Percent when parsing in places that used AsmToken::Register.
Then changed X86ATTAsmParser::ParseRegister to parse out registers as an
AsmToken::Percent followed by an AsmToken::Identifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80929 91177308-0d34-0410-b5e6-96231b3b80d8
I can clean this up a bit more and do way with the TheCondState and just use
the top element on the TheCondStack if not empty. Also may tweak the code
around ParseConditionalAssemblyDirectives() to simplify the AsmParser code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78423 91177308-0d34-0410-b5e6-96231b3b80d8
the parsing of the .dump and .load should be done in the assembly parser and
not have any need for an MCStreamer API. Changed the code for now so these
just produce an error saying these specific directives are not yet implemented
since they are likely no longer used and may never need to be implemented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76462 91177308-0d34-0410-b5e6-96231b3b80d8
Kevin Enderby