basic block to hold instructions, and managing all of their lifetimes in
a fixture. This makes it easy to sink the expectations into the test
cases themselves which also makes things a bit more explicit and clearer
IMO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198532 91177308-0d34-0410-b5e6-96231b3b80d8
__builtin_returnaddress requires that the value passed into is be a constant.
However, at -O0 even a constant expression may not be converted to a constant.
Emit an error message intead of crashing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198531 91177308-0d34-0410-b5e6-96231b3b80d8
All other uses of this macro in LLVM/clang have been moved to the function
definition so follow suite (and the usage advice) here too for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198516 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198503 91177308-0d34-0410-b5e6-96231b3b80d8
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198478 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation is to mark dump methods as used in debug builds so that they can
be called from lldb, but to not do so in release builds so that they can be
dead-stripped.
There's lots of potential follow-up work suggested in the thread
"Should dump methods be LLVM_ATTRIBUTE_USED only in debug builds?" on cfe-dev,
but everyone seems to agreen on this subset.
Macro name chosen by fair coin toss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198456 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198441.
This change doesn't build on Windows, and doesn't do the right thing on
Linux and other platforms that don't use a _Z prefix instead of __Z for
C++ names.
It also had no tests, so it wasn't clear how to fix it forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198445 91177308-0d34-0410-b5e6-96231b3b80d8
symbol name, also put the human readable name in a comment.
Also fix a bug in LLVMDisasmInstruction() that was not flushing
the raw_svector_ostream for the disassembled instruction string
before copying it to the output buffer that was causing truncation
of the output.
rdar://10173828
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198441 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch any program that wanted to know the final symbol name of a
GlobalValue had to link with Target.
This patch implements a compromise solution where the mangler uses DataLayout.
This way, any tool that already links with Target (llc, clang) gets the exact
behavior as before and new IR files can be mangled without linking with Target.
With this patch the mangler is constructed with just a DataLayout and DataLayout
is extended to include the information the Mangler needs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198438 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r198398, thus reapplying r198397.
I had accidentally introduced an endianness issue when applying the hash
to the type unit. Using support::ulittle64_t in the reinterpret_cast in
addDwarfTypeUnitType fixes this issue.
Original commit message:
Debug Info: Type Units: Simplify type hashing using IR-provided unique
names.
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198436 91177308-0d34-0410-b5e6-96231b3b80d8
The loop rerolling pass was failing with an assertion failure from a
failed cast on loops like this:
void foo(int *A, int *B, int m, int n) {
for (int i = m; i < n; i+=4) {
A[i+0] = B[i+0] * 4;
A[i+1] = B[i+1] * 4;
A[i+2] = B[i+2] * 4;
A[i+3] = B[i+3] * 4;
}
}
The code was casting the SCEV-expanded code for the new
induction variable to a phi-node. When the loop had a non-constant
lower bound, the SCEV expander would end the code expansion with an
add insted of a phi node and the cast would fail.
It looks like the cast to a phi node was only needed to get the
induction variable value coming from the backedge to compute the end
of loop condition. This patch changes the loop reroller to compare
the induction variable to the number of times the backedge is taken
instead of the iteration count of the loop. In other words, we stop
the loop when the current value of the induction variable ==
IterationCount-1. Previously, the comparison was comparing the
induction variable value from the next iteration == IterationCount.
This problem only seems to occur on 32-bit targets. For some reason,
the loop is not rerolled on 64-bit targets.
PR18290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198425 91177308-0d34-0410-b5e6-96231b3b80d8
Back out the part of r198399 that enabled LLVM_FINAL/LLVM_OVERRIDE on VS 2010.
DwarfUnit.h legitimately uses them on destructors which unfortunately triggers
Compiler Error C3665 (override specifier not allowed on a destructor/finalizer)
prior to MSVC 2012:
virtual ~DwarfCompileUnit() LLVM_OVERRIDE;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198401 91177308-0d34-0410-b5e6-96231b3b80d8
cycles
This allows the value equality check to work even if we don't have a dominator
tree. Also add some more comments.
I was worried about compile time impacts and did not implement reachability but
used the dominance check in the initial patch. The trade-off was that the
dominator tree was required.
The llvm utility function isPotentiallyReachable cuts off the recursive search
after 32 visits. Testing did not show any compile time regressions showing my
worries unjustfied.
No compile time or performance regressions at O3 -flto -mavx on test-suite +
externals.
Addresses review comments from r198290.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198400 91177308-0d34-0410-b5e6-96231b3b80d8
The 'sealed' definition of LLVM_FINAL can be dropped once VS 2010 is
decommissioned.
Some of this is speculative so will keep an eye on the waterfall -- ping me if
you see failures.
Incremental work towards C++11 migration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198399 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting due to bot failure I won't have time to investigate until
tomorrow.
This reverts commit r198397.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198398 91177308-0d34-0410-b5e6-96231b3b80d8
What's good for LTO metadata size problems ought to be good for non-LTO
debug info size too, so let's rely on the same uniqueness in both cases.
If it's insufficient for non-LTO for whatever reason (since we now won't
be uniquing CU-local types or any C types - but these are likely to not
be the most significant contributors to type bloat) we should consider a
frontend solution that'll help both LTO and non-LTO alike, rather than
using DWARF-level DIE-hashing that only helps non-LTO debug info size.
It's also much simpler this way and benefits C++ even more since we can
deduplicate lexically separate definitions of the same C++ type since
they have the same mangled name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198397 91177308-0d34-0410-b5e6-96231b3b80d8
The cgo problem was that it wants dwarf2 which doesn't support direct
constant encoding of the location. So let's add support for dwarf2
encoding (using a location expression) of data member locations.
This reverts commit r198385.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198389 91177308-0d34-0410-b5e6-96231b3b80d8
Apologies for the noise - we're seeing some Go failures with cgo
interacting with Clang's debug info due to this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198385 91177308-0d34-0410-b5e6-96231b3b80d8
This functionality was enabled by r198374. Here's a test to ensure it
works and we don't regress it.
Based on a patch by Maciej Piechotka.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198377 91177308-0d34-0410-b5e6-96231b3b80d8
The greedy register allocator tries to split a live-range around each
instruction where it is used or defined to relax the constraints on the entire
live-range (this is a last chance split before falling back to spill).
The goal is to have a big live-range that is unconstrained (i.e., that can use
the largest legal register class) and several small local live-range that carry
the constraints implied by each instruction.
E.g.,
Let csti be the constraints on operation i.
V1=
op1 V1(cst1)
op2 V1(cst2)
V1 live-range is constrained on the intersection of cst1 and cst2.
tryInstructionSplit relaxes those constraints by aggressively splitting each
def/use point:
V1=
V2 = V1
V3 = V2
op1 V3(cst1)
V4 = V2
op2 V4(cst2)
Because of how the coalescer infrastructure works, each new variable (V3, V4)
that is alive at the same time as V1 (or its copy, here V2) interfere with V1.
Thus, we end up with an uncoalescable copy for each split point.
To make tryInstructionSplit less aggressive, we check if the split point
actually relaxes the constraints on the whole live-range. If it does not, we do
not insert it.
Indeed, it will not help the global allocation problem:
- V1 will have the same constraints.
- V1 will have the same interference + possibly the newly added split variable
VS.
- VS will produce an uncoalesceable copy if alive at the same time as V1.
<rdar://problem/15570057>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198369 91177308-0d34-0410-b5e6-96231b3b80d8
CR logicals (crand, crxor, etc.) on the P7 need to be in the first slot of each
dispatch group. The old itinerary entry was just wrong (but has not mattered
because we don't generate these instructions).
This will matter when, in an upcoming commit, we start generating these
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198359 91177308-0d34-0410-b5e6-96231b3b80d8
Several of the 64-bit fixed-point instructions with immediate operands were
using the 32-bit (i32) operand nodes instead of the corresponding 64-bit (i64)
operand definitions (u16imm instead of u16imm64, for example).
This error has had no effect so far, but would have caused type-checking
violations with an upcoming change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198356 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in the comment above CodeGenPrepare::OptimizeInst, which aggressively
sinks compares to reduce pressure on the condition register(s), for targets
such as PowerPC with multiple condition registers, this may not be the right
thing to do. This adds an HasMultipleConditionRegisters boolean to TLI, and
CodeGenPrepare::OptimizeInst is skipped when HasMultipleConditionRegisters is
true.
This functionality will be used by the PowerPC backend in an upcoming commit.
Especially when the PowerPC backend starts tracking individual condition
register bits as separate allocatable entities (which will happen in this
upcoming commit), this sinking from CodeGenPrepare::OptimizeInst is
significantly suboptimial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198354 91177308-0d34-0410-b5e6-96231b3b80d8
I originally had these using opt -verify, and I never removed the
-verify when converting them to use llvm-as instead, so these were
failing because of using the -verify argument which llvm-as doesn't have
instead of what it's actually supposed to be testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198352 91177308-0d34-0410-b5e6-96231b3b80d8
Use an if statement instead of a pair of ternary operators checking
the same condition.
Use a cheap method call rather than returning the local symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198351 91177308-0d34-0410-b5e6-96231b3b80d8
