Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
This is equivalent to the AMDGPUTargetMachine now, but it is the
starting point for separating R600 and GCN functionality into separate
targets.
It is recommened that users start using the gcn triple for GCN-based
GPUs, because using the r600 triple for these GPUs will be deprecated in
the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225277 91177308-0d34-0410-b5e6-96231b3b80d8
This matches the format produced by the AMD proprietary driver.
//==================================================================//
// Shell script for converting .ll test cases: (Pass the .ll files
you want to convert to this script as arguments).
//==================================================================//
; This was necessary on my system so that A-Z in sed would match only
; upper case. I'm not sure why.
export LC_ALL='C'
TEST_FILES="$*"
MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r`
for f in $TEST_FILES; do
# Check that there are SI tests:
grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f
if [ $? -eq 0 ]; then
for match in $MATCHES; do
sed -i -e "s/\([ :]$match\)/\L\1/" $f
done
# Try to get check lines with partial instruction names
sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f
fi
done
sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll
sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll
sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll
sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll
sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll
//==================================================================//
// Shell script for converting .td files (run this last)
//==================================================================//
export LC_ALL='C'
sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td
sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
Add some more tests to make sure better operand
choices are still made. Leave some cases that seem
to have no reason to ever be e64 alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217789 91177308-0d34-0410-b5e6-96231b3b80d8
Print the range of registers used with a single letter prefix.
This better matches what the shader compiler produces and
is overall less obnoxious than concatenating all of the
subregister names together.
Instead of SGPR0, it will print s0. Instead of SGPR0_SGPR1,
it will print s[0:1] and so on.
There doesn't appear to be a straightforward way
to get the actual register info in the InstPrinter,
so this parses the generated name to print with the
new syntax.
The required test changes are pretty nasty, and register
matching regexes are now worse. Since there isn't a way to
add to a variable in FileCheck, some of the tests now don't
check the exact number of registers used, but I don't think that
will be a real problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194443 91177308-0d34-0410-b5e6-96231b3b80d8
We can't enable the verifier for tests with SI_IF and SI_ELSE, because
these instructions are always followed by a COPY which copies their
result to the next basic block. This violates the machine verifier's
rule that non-terminators can not folow terminators.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192366 91177308-0d34-0410-b5e6-96231b3b80d8
R600 doesn't need to do any scheduling on the SelectionDAG now that it
has a very good MachineScheduler. Also, using the VLIW SelectionDAG
scheduler was having a major impact on compile times. For example with
the phatk kernel here are the LLVM IR to machine code compile times:
With Sched::VLIW
Total Compile Time: 1.4890 Seconds (User + System)
SelectionDAG Instruction Scheduling: 1.1670 Seconds (User + System)
With Sched::Source
Total Compile Time: 0.3330 Seconds (User + System)
SelectionDAG Instruction Scheduling: 0.0070 Seconds (User + System)
The code ouput was identical with both schedulers. This may not be true
for all programs, but it gives me confidence that there won't be much
reduction, if any, in code quality by using Sched::Source.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188215 91177308-0d34-0410-b5e6-96231b3b80d8
