6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-28 19:31:58 +00:00
Code Issues Projects Releases Wiki Activity
1edea19210
llvm-6502/test/Transforms/Scalarizer/basic.ll
Richard Sandiford 166acc9489 Fix Scalarizer insertion point when replacing PHIs with insertelements 
If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones.  The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197909 91177308-0d34-0410-b5e6-96231b3b80d8
2013-12-23 14:51:56 +00:00

452 lines
20 KiB
LLVM
Raw Blame History

; RUN: opt %s -scalarizer -scalarize-load-store -dce -S | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
declare <4 x float> @ext(<4 x float>)
@g = global <4 x float> zeroinitializer
define void @f1(<4 x float> %init, <4 x float> *%base, i32 %count) {
; CHECK-LABEL: @f1(
; CHECK: entry:
; CHECK: %init.i0 = extractelement <4 x float> %init, i32 0
; CHECK: %init.i1 = extractelement <4 x float> %init, i32 1
; CHECK: %init.i2 = extractelement <4 x float> %init, i32 2
; CHECK: %init.i3 = extractelement <4 x float> %init, i32 3
; CHECK: br label %loop
; CHECK: loop:
; CHECK: %i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
; CHECK: %acc.i0 = phi float [ %init.i0, %entry ], [ %sel.i0, %loop ]
; CHECK: %acc.i1 = phi float [ %init.i1, %entry ], [ %sel.i1, %loop ]
; CHECK: %acc.i2 = phi float [ %init.i2, %entry ], [ %sel.i2, %loop ]
; CHECK: %acc.i3 = phi float [ %init.i3, %entry ], [ %sel.i3, %loop ]
; CHECK: %nexti = sub i32 %i, 1
; CHECK: %ptr = getelementptr <4 x float>* %base, i32 %i
; CHECK: %ptr.i0 = bitcast <4 x float>* %ptr to float*
; CHECK: %val.i0 = load float* %ptr.i0, align 16
; CHECK: %ptr.i1 = getelementptr float* %ptr.i0, i32 1
; CHECK: %val.i1 = load float* %ptr.i1, align 4
; CHECK: %ptr.i2 = getelementptr float* %ptr.i0, i32 2
; CHECK: %val.i2 = load float* %ptr.i2, align 8
; CHECK: %ptr.i3 = getelementptr float* %ptr.i0, i32 3
; CHECK: %val.i3 = load float* %ptr.i3, align 4
; CHECK: %add.i0 = fadd float %val.i0, %val.i2
; CHECK: %add.i1 = fadd float %val.i1, %val.i3
; CHECK: %add.i2 = fadd float %acc.i0, %acc.i2
; CHECK: %add.i3 = fadd float %acc.i1, %acc.i3
; CHECK: %add.upto0 = insertelement <4 x float> undef, float %add.i0, i32 0
; CHECK: %add.upto1 = insertelement <4 x float> %add.upto0, float %add.i1, i32 1
; CHECK: %add.upto2 = insertelement <4 x float> %add.upto1, float %add.i2, i32 2
; CHECK: %add = insertelement <4 x float> %add.upto2, float %add.i3, i32 3
; CHECK: %call = call <4 x float> @ext(<4 x float> %add)
; CHECK: %call.i0 = extractelement <4 x float> %call, i32 0
; CHECK: %cmp.i0 = fcmp ogt float %call.i0, 1.0
; CHECK: %call.i1 = extractelement <4 x float> %call, i32 1
; CHECK: %cmp.i1 = fcmp ogt float %call.i1, 2.0
; CHECK: %call.i2 = extractelement <4 x float> %call, i32 2
; CHECK: %cmp.i2 = fcmp ogt float %call.i2, 3.0
; CHECK: %call.i3 = extractelement <4 x float> %call, i32 3
; CHECK: %cmp.i3 = fcmp ogt float %call.i3, 4.0
; CHECK: %sel.i0 = select i1 %cmp.i0, float %call.i0, float 5.0
; CHECK: %sel.i1 = select i1 %cmp.i1, float %call.i1, float 6.0
; CHECK: %sel.i2 = select i1 %cmp.i2, float %call.i2, float 7.0
; CHECK: %sel.i3 = select i1 %cmp.i3, float %call.i3, float 8.0
; CHECK: store float %sel.i0, float* %ptr.i0
; CHECK: store float %sel.i1, float* %ptr.i1
; CHECK: store float %sel.i2, float* %ptr.i2
; CHECK: store float %sel.i3, float* %ptr.i3
; CHECK: %test = icmp eq i32 %nexti, 0
; CHECK: br i1 %test, label %loop, label %exit
; CHECK: exit:
; CHECK: ret void
entry:
br label %loop
loop:
%i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
%acc = phi <4 x float> [ %init, %entry ], [ %sel, %loop ]
%nexti = sub i32 %i, 1
%ptr = getelementptr <4 x float> *%base, i32 %i
%val = load <4 x float> *%ptr
%dval = bitcast <4 x float> %val to <2 x double>
%dacc = bitcast <4 x float> %acc to <2 x double>
%shuffle1 = shufflevector <2 x double> %dval, <2 x double> %dacc,
<2 x i32> <i32 0, i32 2>
%shuffle2 = shufflevector <2 x double> %dval, <2 x double> %dacc,
<2 x i32> <i32 1, i32 3>
%f1 = bitcast <2 x double> %shuffle1 to <4 x float>
%f2 = bitcast <2 x double> %shuffle2 to <4 x float>
%add = fadd <4 x float> %f1, %f2
%call = call <4 x float> @ext(<4 x float> %add)
%cmp = fcmp ogt <4 x float> %call,
<float 1.0, float 2.0, float 3.0, float 4.0>
%sel = select <4 x i1> %cmp, <4 x float> %call,
<4 x float> <float 5.0, float 6.0, float 7.0, float 8.0>
store <4 x float> %sel, <4 x float> *%ptr
%test = icmp eq i32 %nexti, 0
br i1 %test, label %loop, label %exit
exit:
ret void
}
define void @f2(<4 x i32> %init, <4 x i8> *%base, i32 %count) {
; CHECK-LABEL: define void @f2(<4 x i32> %init, <4 x i8>* %base, i32 %count) {
; CHECK: entry:
; CHECK: %init.i0 = extractelement <4 x i32> %init, i32 0
; CHECK: %init.i1 = extractelement <4 x i32> %init, i32 1
; CHECK: %init.i2 = extractelement <4 x i32> %init, i32 2
; CHECK: %init.i3 = extractelement <4 x i32> %init, i32 3
; CHECK: br label %loop
; CHECK: loop:
; CHECK: %i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
; CHECK: %acc.i0 = phi i32 [ %init.i0, %entry ], [ %sel.i0, %loop ]
; CHECK: %acc.i1 = phi i32 [ %init.i1, %entry ], [ %sel.i1, %loop ]
; CHECK: %acc.i2 = phi i32 [ %init.i2, %entry ], [ %sel.i2, %loop ]
; CHECK: %acc.i3 = phi i32 [ %init.i3, %entry ], [ %sel.i3, %loop ]
; CHECK: %nexti = sub i32 %i, 1
; CHECK: %ptr = getelementptr <4 x i8>* %base, i32 %i
; CHECK: %ptr.i0 = bitcast <4 x i8>* %ptr to i8*
; CHECK: %val.i0 = load i8* %ptr.i0, align 4
; CHECK: %ptr.i1 = getelementptr i8* %ptr.i0, i32 1
; CHECK: %val.i1 = load i8* %ptr.i1, align 1
; CHECK: %ptr.i2 = getelementptr i8* %ptr.i0, i32 2
; CHECK: %val.i2 = load i8* %ptr.i2, align 2
; CHECK: %ptr.i3 = getelementptr i8* %ptr.i0, i32 3
; CHECK: %val.i3 = load i8* %ptr.i3, align 1
; CHECK: %ext.i0 = sext i8 %val.i0 to i32
; CHECK: %ext.i1 = sext i8 %val.i1 to i32
; CHECK: %ext.i2 = sext i8 %val.i2 to i32
; CHECK: %ext.i3 = sext i8 %val.i3 to i32
; CHECK: %add.i0 = add i32 %ext.i0, %acc.i0
; CHECK: %add.i1 = add i32 %ext.i1, %acc.i1
; CHECK: %add.i2 = add i32 %ext.i2, %acc.i2
; CHECK: %add.i3 = add i32 %ext.i3, %acc.i3
; CHECK: %cmp.i0 = icmp slt i32 %add.i0, -10
; CHECK: %cmp.i1 = icmp slt i32 %add.i1, -11
; CHECK: %cmp.i2 = icmp slt i32 %add.i2, -12
; CHECK: %cmp.i3 = icmp slt i32 %add.i3, -13
; CHECK: %sel.i0 = select i1 %cmp.i0, i32 %add.i0, i32 %i
; CHECK: %sel.i1 = select i1 %cmp.i1, i32 %add.i1, i32 %i
; CHECK: %sel.i2 = select i1 %cmp.i2, i32 %add.i2, i32 %i
; CHECK: %sel.i3 = select i1 %cmp.i3, i32 %add.i3, i32 %i
; CHECK: %trunc.i0 = trunc i32 %sel.i0 to i8
; CHECK: %trunc.i1 = trunc i32 %sel.i1 to i8
; CHECK: %trunc.i2 = trunc i32 %sel.i2 to i8
; CHECK: %trunc.i3 = trunc i32 %sel.i3 to i8
; CHECK: store i8 %trunc.i0, i8* %ptr.i0, align 4
; CHECK: store i8 %trunc.i1, i8* %ptr.i1, align 1
; CHECK: store i8 %trunc.i2, i8* %ptr.i2, align 2
; CHECK: store i8 %trunc.i3, i8* %ptr.i3, align 1
; CHECK: %test = icmp eq i32 %nexti, 0
; CHECK: br i1 %test, label %loop, label %exit
; CHECK: exit:
; CHECK: ret void
entry:
br label %loop
loop:
%i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
%acc = phi <4 x i32> [ %init, %entry ], [ %sel, %loop ]
%nexti = sub i32 %i, 1
%ptr = getelementptr <4 x i8> *%base, i32 %i
%val = load <4 x i8> *%ptr
%ext = sext <4 x i8> %val to <4 x i32>
%add = add <4 x i32> %ext, %acc
%cmp = icmp slt <4 x i32> %add, <i32 -10, i32 -11, i32 -12, i32 -13>
%single = insertelement <4 x i32> undef, i32 %i, i32 0
%limit = shufflevector <4 x i32> %single, <4 x i32> undef,
<4 x i32> zeroinitializer
%sel = select <4 x i1> %cmp, <4 x i32> %add, <4 x i32> %limit
%trunc = trunc <4 x i32> %sel to <4 x i8>
store <4 x i8> %trunc, <4 x i8> *%ptr
%test = icmp eq i32 %nexti, 0
br i1 %test, label %loop, label %exit
exit:
ret void
}
; Check that !tbaa information is preserved.
define void @f3(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f3(
; CHECK: %val.i0 = load i32* %src.i0, align 16, !tbaa ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32* %src.i1, align 4, !tbaa ![[TAG]]
; CHECK: %val.i2 = load i32* %src.i2, align 8, !tbaa ![[TAG]]
; CHECK: %val.i3 = load i32* %src.i3, align 4, !tbaa ![[TAG]]
; CHECK: store i32 %add.i0, i32* %dst.i0, align 16, !tbaa ![[TAG:[0-9]*]]
; CHECK: store i32 %add.i1, i32* %dst.i1, align 4, !tbaa ![[TAG]]
; CHECK: store i32 %add.i2, i32* %dst.i2, align 8, !tbaa ![[TAG]]
; CHECK: store i32 %add.i3, i32* %dst.i3, align 4, !tbaa ![[TAG]]
; CHECK: ret void
%val = load <4 x i32> *%src, !tbaa !1
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !tbaa !2
ret void
}
; Check that !tbaa.struct information is preserved.
define void @f4(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f4(
; CHECK: %val.i0 = load i32* %src.i0, align 16, !tbaa.struct ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32* %src.i1, align 4, !tbaa.struct ![[TAG]]
; CHECK: %val.i2 = load i32* %src.i2, align 8, !tbaa.struct ![[TAG]]
; CHECK: %val.i3 = load i32* %src.i3, align 4, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i0, i32* %dst.i0, align 16, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i1, i32* %dst.i1, align 4, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i2, i32* %dst.i2, align 8, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i3, i32* %dst.i3, align 4, !tbaa.struct ![[TAG]]
; CHECK: ret void
%val = load <4 x i32> *%src, !tbaa.struct !5
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !tbaa.struct !5
ret void
}
; Check that llvm.mem.parallel_loop_access information is preserved.
define void @f5(i32 %count, <4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f5(
; CHECK: %val.i0 = load i32* %this_src.i0, align 16, !llvm.mem.parallel_loop_access ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32* %this_src.i1, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: %val.i2 = load i32* %this_src.i2, align 8, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: %val.i3 = load i32* %this_src.i3, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i0, i32* %this_dst.i0, align 16, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i1, i32* %this_dst.i1, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i2, i32* %this_dst.i2, align 8, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i3, i32* %this_dst.i3, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: ret void
entry:
br label %loop
loop:
%index = phi i32 [ 0, %entry ], [ %next_index, %loop ]
%this_src = getelementptr <4 x i32> *%src, i32 %index
%this_dst = getelementptr <4 x i32> *%dst, i32 %index
%val = load <4 x i32> *%this_src, !llvm.mem.parallel_loop_access !3
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%this_dst, !llvm.mem.parallel_loop_access !3
%next_index = add i32 %index, -1
%continue = icmp ne i32 %next_index, %count
br i1 %continue, label %loop, label %end, !llvm.loop !3
end:
ret void
}
; Check that fpmath information is preserved.
define <4 x float> @f6(<4 x float> %x) {
; CHECK-LABEL: @f6(
; CHECK: %x.i0 = extractelement <4 x float> %x, i32 0
; CHECK: %res.i0 = fadd float %x.i0, 1.0{{[e+0]*}}, !fpmath ![[TAG:[0-9]*]]
; CHECK: %x.i1 = extractelement <4 x float> %x, i32 1
; CHECK: %res.i1 = fadd float %x.i1, 2.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %x.i2 = extractelement <4 x float> %x, i32 2
; CHECK: %res.i2 = fadd float %x.i2, 3.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %x.i3 = extractelement <4 x float> %x, i32 3
; CHECK: %res.i3 = fadd float %x.i3, 4.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %res.upto0 = insertelement <4 x float> undef, float %res.i0, i32 0
; CHECK: %res.upto1 = insertelement <4 x float> %res.upto0, float %res.i1, i32 1
; CHECK: %res.upto2 = insertelement <4 x float> %res.upto1, float %res.i2, i32 2
; CHECK: %res = insertelement <4 x float> %res.upto2, float %res.i3, i32 3
; CHECK: ret <4 x float> %res
%res = fadd <4 x float> %x, <float 1.0, float 2.0, float 3.0, float 4.0>,
!fpmath !4
ret <4 x float> %res
}
; Check that random metadata isn't kept.
define void @f7(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f7(
; CHECK-NOT: !foo
; CHECK: ret void
%val = load <4 x i32> *%src, !foo !5
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !foo !5
ret void
}
; Test GEP with vectors.
define void @f8(<4 x float *> *%dest, <4 x float *> %ptr0, <4 x i32> %i0,
float *%other) {
; CHECK-LABEL: @f8(
; CHECK: %dest.i0 = bitcast <4 x float*>* %dest to float**
; CHECK: %dest.i1 = getelementptr float** %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float** %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float** %dest.i0, i32 3
; CHECK: %i0.i1 = extractelement <4 x i32> %i0, i32 1
; CHECK: %i0.i3 = extractelement <4 x i32> %i0, i32 3
; CHECK: %ptr0.i0 = extractelement <4 x float*> %ptr0, i32 0
; CHECK: %val.i0 = getelementptr float* %ptr0.i0, i32 100
; CHECK: %val.i1 = getelementptr float* %other, i32 %i0.i1
; CHECK: %ptr0.i2 = extractelement <4 x float*> %ptr0, i32 2
; CHECK: %val.i2 = getelementptr float* %ptr0.i2, i32 100
; CHECK: %ptr0.i3 = extractelement <4 x float*> %ptr0, i32 3
; CHECK: %val.i3 = getelementptr float* %ptr0.i3, i32 %i0.i3
; CHECK: store float* %val.i0, float** %dest.i0, align 32
; CHECK: store float* %val.i1, float** %dest.i1, align 8
; CHECK: store float* %val.i2, float** %dest.i2, align 16
; CHECK: store float* %val.i3, float** %dest.i3, align 8
; CHECK: ret void
%i1 = insertelement <4 x i32> %i0, i32 100, i32 0
%i2 = insertelement <4 x i32> %i1, i32 100, i32 2
%ptr1 = insertelement <4 x float *> %ptr0, float *%other, i32 1
%val = getelementptr <4 x float *> %ptr1, <4 x i32> %i2
store <4 x float *> %val, <4 x float *> *%dest
ret void
}
; Test the handling of unaligned loads.
define void @f9(<4 x float> *%dest, <4 x float> *%src) {
; CHECK: @f9(
; CHECK: %dest.i0 = bitcast <4 x float>* %dest to float*
; CHECK: %dest.i1 = getelementptr float* %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float* %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float* %dest.i0, i32 3
; CHECK: %src.i0 = bitcast <4 x float>* %src to float*
; CHECK: %val.i0 = load float* %src.i0, align 4
; CHECK: %src.i1 = getelementptr float* %src.i0, i32 1
; CHECK: %val.i1 = load float* %src.i1, align 4
; CHECK: %src.i2 = getelementptr float* %src.i0, i32 2
; CHECK: %val.i2 = load float* %src.i2, align 4
; CHECK: %src.i3 = getelementptr float* %src.i0, i32 3
; CHECK: %val.i3 = load float* %src.i3, align 4
; CHECK: store float %val.i0, float* %dest.i0, align 8
; CHECK: store float %val.i1, float* %dest.i1, align 4
; CHECK: store float %val.i2, float* %dest.i2, align 8
; CHECK: store float %val.i3, float* %dest.i3, align 4
; CHECK: ret void
%val = load <4 x float> *%src, align 4
store <4 x float> %val, <4 x float> *%dest, align 8
ret void
}
; ...and again with subelement alignment.
define void @f10(<4 x float> *%dest, <4 x float> *%src) {
; CHECK: @f10(
; CHECK: %dest.i0 = bitcast <4 x float>* %dest to float*
; CHECK: %dest.i1 = getelementptr float* %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float* %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float* %dest.i0, i32 3
; CHECK: %src.i0 = bitcast <4 x float>* %src to float*
; CHECK: %val.i0 = load float* %src.i0, align 1
; CHECK: %src.i1 = getelementptr float* %src.i0, i32 1
; CHECK: %val.i1 = load float* %src.i1, align 1
; CHECK: %src.i2 = getelementptr float* %src.i0, i32 2
; CHECK: %val.i2 = load float* %src.i2, align 1
; CHECK: %src.i3 = getelementptr float* %src.i0, i32 3
; CHECK: %val.i3 = load float* %src.i3, align 1
; CHECK: store float %val.i0, float* %dest.i0, align 2
; CHECK: store float %val.i1, float* %dest.i1, align 2
; CHECK: store float %val.i2, float* %dest.i2, align 2
; CHECK: store float %val.i3, float* %dest.i3, align 2
; CHECK: ret void
%val = load <4 x float> *%src, align 1
store <4 x float> %val, <4 x float> *%dest, align 2
ret void
}
; Test that sub-byte loads aren't scalarized.
define void @f11(<32 x i1> *%dest, <32 x i1> *%src0) {
; CHECK: @f11(
; CHECK: %val0 = load <32 x i1>* %src0
; CHECK: %val1 = load <32 x i1>* %src1
; CHECK: store <32 x i1> %and, <32 x i1>* %dest
; CHECK: ret void
%src1 = getelementptr <32 x i1> *%src0, i32 1
%val0 = load <32 x i1> *%src0
%val1 = load <32 x i1> *%src1
%and = and <32 x i1> %val0, %val1
store <32 x i1> %and, <32 x i1> *%dest
ret void
}
; Test that variable inserts aren't scalarized.
define void @f12(<4 x i32> *%dest, <4 x i32> *%src, i32 %index) {
; CHECK: @f12(
; CHECK: %val1 = insertelement <4 x i32> %val0, i32 1, i32 %index
; CHECK-DAG: %val1.i0 = extractelement <4 x i32> %val1, i32 0
; CHECK-DAG: %val1.i1 = extractelement <4 x i32> %val1, i32 1
; CHECK-DAG: %val1.i2 = extractelement <4 x i32> %val1, i32 2
; CHECK-DAG: %val1.i3 = extractelement <4 x i32> %val1, i32 3
; CHECK-DAG: %val2.i0 = shl i32 1, %val1.i0
; CHECK-DAG: %val2.i1 = shl i32 2, %val1.i1
; CHECK-DAG: %val2.i2 = shl i32 3, %val1.i2
; CHECK-DAG: %val2.i3 = shl i32 4, %val1.i3
; CHECK: ret void
%val0 = load <4 x i32> *%src
%val1 = insertelement <4 x i32> %val0, i32 1, i32 %index
%val2 = shl <4 x i32> <i32 1, i32 2, i32 3, i32 4>, %val1
store <4 x i32> %val2, <4 x i32> *%dest
ret void
}
; Test vector GEPs with more than one index.
define void @f13(<4 x float *> *%dest, <4 x [4 x float] *> %ptr, <4 x i32> %i,
float *%other) {
; CHECK-LABEL: @f13(
; CHECK: %dest.i0 = bitcast <4 x float*>* %dest to float**
; CHECK: %dest.i1 = getelementptr float** %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float** %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float** %dest.i0, i32 3
; CHECK: %i.i0 = extractelement <4 x i32> %i, i32 0
; CHECK: %ptr.i0 = extractelement <4 x [4 x float]*> %ptr, i32 0
; CHECK: %val.i0 = getelementptr inbounds [4 x float]* %ptr.i0, i32 0, i32 %i.i0
; CHECK: %i.i1 = extractelement <4 x i32> %i, i32 1
; CHECK: %ptr.i1 = extractelement <4 x [4 x float]*> %ptr, i32 1
; CHECK: %val.i1 = getelementptr inbounds [4 x float]* %ptr.i1, i32 1, i32 %i.i1
; CHECK: %i.i2 = extractelement <4 x i32> %i, i32 2
; CHECK: %ptr.i2 = extractelement <4 x [4 x float]*> %ptr, i32 2
; CHECK: %val.i2 = getelementptr inbounds [4 x float]* %ptr.i2, i32 2, i32 %i.i2
; CHECK: %i.i3 = extractelement <4 x i32> %i, i32 3
; CHECK: %ptr.i3 = extractelement <4 x [4 x float]*> %ptr, i32 3
; CHECK: %val.i3 = getelementptr inbounds [4 x float]* %ptr.i3, i32 3, i32 %i.i3
; CHECK: store float* %val.i0, float** %dest.i0, align 32
; CHECK: store float* %val.i1, float** %dest.i1, align 8
; CHECK: store float* %val.i2, float** %dest.i2, align 16
; CHECK: store float* %val.i3, float** %dest.i3, align 8
; CHECK: ret void
%val = getelementptr inbounds <4 x [4 x float] *> %ptr,
<4 x i32> <i32 0, i32 1, i32 2, i32 3>,
<4 x i32> %i
store <4 x float *> %val, <4 x float *> *%dest
ret void
}
; Test combinations of vector and non-vector PHIs.
define <4 x float> @f14(<4 x float> %acc, i32 %count) {
; CHECK-LABEL: @f14(
; CHECK: %this_acc.i0 = phi float [ %acc.i0, %entry ], [ %next_acc.i0, %loop ]
; CHECK: %this_acc.i1 = phi float [ %acc.i1, %entry ], [ %next_acc.i1, %loop ]
; CHECK: %this_acc.i2 = phi float [ %acc.i2, %entry ], [ %next_acc.i2, %loop ]
; CHECK: %this_acc.i3 = phi float [ %acc.i3, %entry ], [ %next_acc.i3, %loop ]
; CHECK: %this_count = phi i32 [ %count, %entry ], [ %next_count, %loop ]
; CHECK: %this_acc.upto0 = insertelement <4 x float> undef, float %this_acc.i0, i32 0
; CHECK: %this_acc.upto1 = insertelement <4 x float> %this_acc.upto0, float %this_acc.i1, i32 1
; CHECK: %this_acc.upto2 = insertelement <4 x float> %this_acc.upto1, float %this_acc.i2, i32 2
; CHECK: %this_acc = insertelement <4 x float> %this_acc.upto2, float %this_acc.i3, i32 3
; CHECK: ret <4 x float> %next_acc
entry:
br label %loop
loop:
%this_acc = phi <4 x float> [ %acc, %entry ], [ %next_acc, %loop ]
%this_count = phi i32 [ %count, %entry ], [ %next_count, %loop ]
%foo = call <4 x float> @ext(<4 x float> %this_acc)
%next_acc = fadd <4 x float> %this_acc, %foo
%next_count = sub i32 %this_count, 1
%cmp = icmp eq i32 %next_count, 0
br i1 %cmp, label %loop, label %exit
exit:
ret <4 x float> %next_acc
}
!0 = metadata !{ metadata !"root" }
!1 = metadata !{ metadata !"set1", metadata !0 }
!2 = metadata !{ metadata !"set2", metadata !0 }
!3 = metadata !{ metadata !3 }
!4 = metadata !{ float 4.0 }
!5 = metadata !{ i64 0, i64 8, null }
Reference in New Issue View Git Blame Copy Permalink