cargo clippy --fix

This adds some new directives for clippy and fixes all warnings.
Also updated the dependencies to their latest versions.

.gitignore

@@ -66,3 +66,4 @@ TAGS.vi
 src/.DS_Store
 tmp.*.rs
 .vscode
+Cargo.lock

Cargo.toml

@@ -40,8 +40,8 @@ edition = "2021"
 name = "mos6502"
 
 [dependencies]
-bitflags = "2.3.3"
-log = "0.4.19"
+bitflags = "2.5.0"
+log = "0.4.21"
 
 [features]
 decimal_mode = []

src/cpu.rs

@@ -47,6 +47,10 @@ where
 }
 
 impl<M: Bus, V: Variant> CPU<M, V> {
+    // Allowing `needless_pass_by_value` to simplify construction. Passing by
+    // value avoids the borrow and improves readability when constructing the
+    // CPU.
+    #[allow(clippy::needless_pass_by_value)]
     pub fn new(memory: M, _variant: V) -> CPU<M, V> {
         CPU {
             registers: Registers::new(),
@@ -56,10 +60,23 @@ impl<M: Bus, V: Variant> CPU<M, V> {
     }
 
     pub fn reset(&mut self) {
-        //TODO: // should read some bytes from the stack and also get the PC from the reset vector
+        //TODO: should read some bytes from the stack and also get the PC from the reset vector
     }
 
+    /// Get the next byte from memory and decode it into an instruction and addressing mode.
+    ///
+    /// # Panics
+    ///
+    /// This function will panic if the instruction is not recognized
+    /// (i.e. the opcode is invalid or has not been implemented).
     pub fn fetch_next_and_decode(&mut self) -> Option<DecodedInstr> {
+        // Helper function to read a 16-bit address from memory
+        fn read_address<M: Bus>(mem: &mut M, addr: u16) -> [u8; 2] {
+            let lo = mem.get_byte(addr);
+            let hi = mem.get_byte(addr.wrapping_add(1));
+            [lo, hi]
+        }
+
         let x: u8 = self.memory.get_byte(self.registers.program_counter);
 
         match V::decode(x) {
@@ -87,12 +104,6 @@ impl<M: Bus, V: Variant> CPU<M, V> {
 
                 let memory = &mut self.memory;
 
-                fn read_address<M: Bus>(mem: &mut M, addr: u16) -> [u8; 2] {
-                    let lo = mem.get_byte(addr);
-                    let hi = mem.get_byte(addr.wrapping_add(1));
-                    [lo, hi]
-                }
-
                 let am_out = match am {
                     AddressingMode::Accumulator | AddressingMode::Implied => {
                         // Always the same -- no input
@@ -221,24 +232,25 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         }
     }
 
+    #[allow(clippy::too_many_lines)]
     pub fn execute_instruction(&mut self, decoded_instr: DecodedInstr) {
         match decoded_instr {
             (Instruction::ADC, OpInput::UseImmediate(val)) => {
-                debug!("add with carry immediate: {}", val);
+                log::debug!("add with carry immediate: {}", val);
                 self.add_with_carry(val);
             }
             (Instruction::ADC, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("add with carry. address: {:?}. value: {}", addr, val);
+                log::debug!("add with carry. address: {:?}. value: {}", addr, val);
                 self.add_with_carry(val);
             }
             (Instruction::ADCnd, OpInput::UseImmediate(val)) => {
-                debug!("add with carry immediate: {}", val);
+                log::debug!("add with carry immediate: {}", val);
                 self.add_with_no_decimal(val);
             }
             (Instruction::ADCnd, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("add with carry. address: {:?}. value: {}", addr, val);
+                log::debug!("add with carry. address: {:?}. value: {}", addr, val);
                 self.add_with_no_decimal(val);
             }
 
@@ -319,7 +331,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
 
             (Instruction::BMI, OpInput::UseRelative(rel)) => {
                 let addr = self.registers.program_counter.wrapping_add(rel);
-                debug!("branch if minus relative. address: {:?}", addr);
+                log::debug!("branch if minus relative. address: {:?}", addr);
                 self.branch_if_minus(addr);
             }
 
@@ -340,7 +352,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 self.push_on_stack(self.registers.status.bits());
                 let pcl = self.memory.get_byte(0xfffe);
                 let pch = self.memory.get_byte(0xffff);
-                self.jump(((pch as u16) << 8) | pcl as u16);
+                self.jump((u16::from(pch) << 8) | u16::from(pcl));
                 self.registers.status.or(Status::PS_DISABLE_INTERRUPTS);
             }
 
@@ -351,7 +363,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 self.push_on_stack(self.registers.status.bits());
                 let pcl = self.memory.get_byte(0xfffe);
                 let pch = self.memory.get_byte(0xffff);
-                self.jump(((pch as u16) << 8) | pcl as u16);
+                self.jump((u16::from(pch) << 8) | u16::from(pcl));
                 self.registers.status.or(Status::PS_DISABLE_INTERRUPTS);
                 self.registers.status.and(!Status::PS_DECIMAL_MODE);
             }
@@ -447,32 +459,32 @@ impl<M: Bus, V: Variant> CPU<M, V> {
             }
 
             (Instruction::LDA, OpInput::UseImmediate(val)) => {
-                debug!("load A immediate: {}", val);
+                log::debug!("load A immediate: {}", val);
                 self.load_accumulator(val);
             }
             (Instruction::LDA, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("load A. address: {:?}. value: {}", addr, val);
+                log::debug!("load A. address: {:?}. value: {}", addr, val);
                 self.load_accumulator(val);
             }
 
             (Instruction::LDX, OpInput::UseImmediate(val)) => {
-                debug!("load X immediate: {}", val);
+                log::debug!("load X immediate: {}", val);
                 self.load_x_register(val);
             }
             (Instruction::LDX, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("load X. address: {:?}. value: {}", addr, val);
+                log::debug!("load X. address: {:?}. value: {}", addr, val);
                 self.load_x_register(val);
             }
 
             (Instruction::LDY, OpInput::UseImmediate(val)) => {
-                debug!("load Y immediate: {}", val);
+                log::debug!("load Y immediate: {}", val);
                 self.load_y_register(val);
             }
             (Instruction::LDY, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("load Y. address: {:?}. value: {}", addr, val);
+                log::debug!("load Y. address: {:?}. value: {}", addr, val);
                 self.load_y_register(val);
             }
 
@@ -598,32 +610,33 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 self.registers.status = Status::from_bits_truncate(val);
                 let pcl: u8 = self.pull_from_stack();
                 let pch: u8 = self.fetch_from_stack();
-                self.registers.program_counter = ((pch as u16) << 8) | pcl as u16;
+                self.registers.program_counter = (u16::from(pch) << 8) | u16::from(pcl);
             }
             (Instruction::RTS, OpInput::UseImplied) => {
                 self.pull_from_stack();
                 let pcl: u8 = self.pull_from_stack();
                 let pch: u8 = self.fetch_from_stack();
-                self.registers.program_counter = (((pch as u16) << 8) | pcl as u16).wrapping_add(1);
+                self.registers.program_counter =
+                    ((u16::from(pch) << 8) | u16::from(pcl)).wrapping_add(1);
             }
 
             (Instruction::SBC, OpInput::UseImmediate(val)) => {
-                debug!("subtract with carry immediate: {}", val);
+                log::debug!("subtract with carry immediate: {}", val);
                 self.subtract_with_carry(val);
             }
             (Instruction::SBC, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("subtract with carry. address: {:?}. value: {}", addr, val);
+                log::debug!("subtract with carry. address: {:?}. value: {}", addr, val);
                 self.subtract_with_carry(val);
             }
 
             (Instruction::SBCnd, OpInput::UseImmediate(val)) => {
-                debug!("subtract with carry immediate: {}", val);
+                log::debug!("subtract with carry immediate: {}", val);
                 self.subtract_with_no_decimal(val);
             }
             (Instruction::SBCnd, OpInput::UseAddress(addr)) => {
                 let val = self.memory.get_byte(addr);
-                debug!("subtract with carry. address: {:?}. value: {}", addr, val);
+                log::debug!("subtract with carry. address: {:?}. value: {}", addr, val);
                 self.subtract_with_no_decimal(val);
             }
 
@@ -711,10 +724,10 @@ impl<M: Bus, V: Variant> CPU<M, V> {
             }
 
             (Instruction::NOP, OpInput::UseImplied) => {
-                debug!("NOP instruction");
+                log::debug!("NOP instruction");
             }
             (_, _) => {
-                debug!(
+                log::debug!(
                     "attempting to execute unimplemented or invalid \
                      instruction"
                 );
@@ -734,23 +747,23 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         }
     }
 
-    fn set_flags_from_i8(status: &mut Status, value: i8) {
-        let is_zero = value == 0;
-        let is_negative = value < 0;
-
-        status.set_with_mask(
-            Status::PS_ZERO | Status::PS_NEGATIVE,
-            Status::new(StatusArgs {
-                zero: is_zero,
-                negative: is_negative,
-                ..StatusArgs::none()
-            }),
-        );
+    /// Checks if a given `u8` value should be interpreted as negative when
+    /// considered as `i8`.
+    ///
+    /// In an 8-bit unsigned integer (`u8`), values range from 0 to 255. When
+    /// these values are interpreted as signed integers (`i8`), values from 128
+    /// to 255 are considered negative, corresponding to the signed range -128
+    /// to -1. This function checks if the provided `u8` value falls within that
+    /// range, effectively determining if the most significant bit is set, which
+    /// indicates a negative number in two's complement form.
+    /// ```
+    const fn value_is_negative(value: u8) -> bool {
+        value > 127
     }
 
     fn set_flags_from_u8(status: &mut Status, value: u8) {
         let is_zero = value == 0;
-        let is_negative = value > 127;
+        let is_negative = Self::value_is_negative(value);
 
         status.set_with_mask(
             Status::PS_ZERO | Status::PS_NEGATIVE,
@@ -774,7 +787,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 ..StatusArgs::none()
             }),
         );
-        CPU::<M, V>::set_flags_from_i8(status, *p_val as i8);
+        CPU::<M, V>::set_flags_from_u8(status, *p_val);
     }
 
     fn shift_right_with_flags(p_val: &mut u8, status: &mut Status) {
@@ -788,7 +801,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 ..StatusArgs::none()
             }),
         );
-        CPU::<M, V>::set_flags_from_i8(status, *p_val as i8);
+        CPU::<M, V>::set_flags_from_u8(status, *p_val);
     }
 
     fn rotate_left_with_flags(p_val: &mut u8, status: &mut Status) {
@@ -804,7 +817,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 ..StatusArgs::none()
             }),
         );
-        CPU::<M, V>::set_flags_from_i8(status, *p_val as i8);
+        CPU::<M, V>::set_flags_from_u8(status, *p_val);
     }
 
     fn rotate_right_with_flags(p_val: &mut u8, status: &mut Status) {
@@ -820,7 +833,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
                 ..StatusArgs::none()
             }),
         );
-        CPU::<M, V>::set_flags_from_i8(status, *p_val as i8);
+        CPU::<M, V>::set_flags_from_u8(status, *p_val);
     }
 
     fn set_u8_with_flags(mem: &mut u8, status: &mut Status, value: u8) {
@@ -853,7 +866,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
     }
 
     fn add_with_carry(&mut self, value: u8) {
-        fn decimal_adjust(result: u8) -> u8 {
+        const fn decimal_adjust(result: u8) -> u8 {
             let bcd1: u8 = if (result & 0x0f) > 0x09 { 0x06 } else { 0x00 };
 
             let bcd2: u8 = if (result.wrapping_add(bcd1) & 0xf0) > 0x90 {
@@ -897,7 +910,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
 
         self.load_accumulator(result);
 
-        debug!("accumulator: {}", self.registers.accumulator);
+        log::debug!("accumulator: {}", self.registers.accumulator);
     }
 
     fn add_with_no_decimal(&mut self, value: u8) {
@@ -929,7 +942,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
 
         self.load_accumulator(result);
 
-        debug!("accumulator: {}", self.registers.accumulator);
+        log::debug!("accumulator: {}", self.registers.accumulator);
     }
 
     fn and(&mut self, value: u8) {
@@ -941,11 +954,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         // A - M - (1 - C)
 
         // nc -- 'not carry'
-        let nc: u8 = if self.registers.status.contains(Status::PS_CARRY) {
-            0
-        } else {
-            1
-        };
+        let nc: u8 = u8::from(!self.registers.status.contains(Status::PS_CARRY));
 
         let a_before = self.registers.accumulator;
 
@@ -987,11 +996,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         // A - M - (1 - C)
 
         // nc -- 'not carry'
-        let nc: u8 = if self.registers.status.contains(Status::PS_CARRY) {
-            0
-        } else {
-            1
-        };
+        let nc: u8 = u8::from(!self.registers.status.contains(Status::PS_CARRY));
 
         let a_before = self.registers.accumulator;
 
@@ -1049,13 +1054,12 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         let value_new = val.wrapping_add(1);
         *val = value_new;
 
-        let is_negative = (value_new as i8) < 0;
         let is_zero = value_new == 0;
 
         flags.set_with_mask(
             Status::PS_NEGATIVE | Status::PS_ZERO,
             Status::new(StatusArgs {
-                negative: is_negative,
+                negative: Self::value_is_negative(value_new),
                 zero: is_zero,
                 ..StatusArgs::none()
             }),
@@ -1066,14 +1070,14 @@ impl<M: Bus, V: Variant> CPU<M, V> {
         let value_new = val.wrapping_sub(1);
         *val = value_new;
 
-        let is_negative = (value_new as i8) < 0;
         let is_zero = value_new == 0;
+        let is_negative = Self::value_is_negative(value_new);
 
         flags.set_with_mask(
             Status::PS_NEGATIVE | Status::PS_ZERO,
             Status::new(StatusArgs {
-                negative: is_negative,
                 zero: is_zero,
+                negative: is_negative,
                 ..StatusArgs::none()
             }),
         );
@@ -1143,20 +1147,24 @@ impl<M: Bus, V: Variant> CPU<M, V> {
     //   ...
     //   The N flag contains most significant bit of the subtraction result.
     fn compare(&mut self, r: u8, val: u8) {
+        // Setting the CARRY flag: A (unsigned) >= NUM (unsigned)
         if r >= val {
             self.registers.status.insert(Status::PS_CARRY);
         } else {
             self.registers.status.remove(Status::PS_CARRY);
         }
 
+        // Setting the ZERO flag: A = NUM
         if r == val {
             self.registers.status.insert(Status::PS_ZERO);
         } else {
             self.registers.status.remove(Status::PS_ZERO);
         }
 
-        let diff: i8 = (r as i8).wrapping_sub(val as i8);
-        if diff < 0 {
+        // Set the NEGATIVE flag based on the MSB of the result of subtraction
+        // This checks if the 8th bit is set (0x80 in hex is 128 in decimal, which is the 8th bit in a byte)
+        let diff = r.wrapping_sub(val);
+        if Self::value_is_negative(diff) {
             self.registers.status.insert(Status::PS_NEGATIVE);
         } else {
             self.registers.status.remove(Status::PS_NEGATIVE);
@@ -1169,7 +1177,7 @@ impl<M: Bus, V: Variant> CPU<M, V> {
     }
 
     fn compare_with_x_register(&mut self, val: u8) {
-        debug!("compare_with_x_register");
+        log::debug!("compare_with_x_register");
 
         let x = self.registers.index_x;
         self.compare(x, val);
@@ -1222,6 +1230,11 @@ impl<M: Bus, V: Variant> core::fmt::Debug for CPU<M, V> {
 
 #[cfg(test)]
 mod tests {
+    // Casting from signed to unsigned integers is intentional in these tests
+    #![allow(clippy::cast_sign_loss)]
+    // Operations may intentionally wrap due to emulation of 8-bit unsigned
+    // integer arithmetic. We do this to test wrap-around conditions.
+    #![allow(clippy::cast_possible_wrap)]
 
     use super::*;
     use crate::instruction::Nmos6502;
@@ -1325,6 +1338,8 @@ mod tests {
         assert!(!cpu.registers.status.contains(Status::PS_NEGATIVE));
         assert!(!cpu.registers.status.contains(Status::PS_OVERFLOW));
 
+        // Allow casting from i8 to u8; -127i8 wraps to 129u8, as intended for
+        // two's complement arithmetic.
         cpu.add_with_carry(-127i8 as u8);
         assert_eq!(cpu.registers.accumulator, 0);
         assert!(cpu.registers.status.contains(Status::PS_CARRY));

src/instruction.rs

@@ -229,7 +229,7 @@ pub enum Instruction {
     TYA,
 }
 
-#[derive(Copy, Clone)]
+#[derive(Copy, Clone, Debug)]
 pub enum OpInput {
     UseImplied,
     UseImmediate(u8),
@@ -237,7 +237,7 @@ pub enum OpInput {
     UseAddress(u16),
 }
 
-#[derive(Copy, Clone)]
+#[derive(Copy, Clone, Debug)]
 pub enum AddressingMode {
     // work directly on accumulator, e. g. `lsr a`.
     Accumulator,
@@ -286,7 +286,8 @@ pub enum AddressingMode {
 }
 
 impl AddressingMode {
-    pub fn extra_bytes(self) -> u16 {
+    #[must_use]
+    pub const fn extra_bytes(self) -> u16 {
         match self {
             AddressingMode::Accumulator => 0,
             AddressingMode::Implied => 0,
@@ -310,6 +311,7 @@ impl AddressingMode {
 pub type DecodedInstr = (Instruction, OpInput);
 
 /// The NMOS 6502 variant. This one is present in the Commodore 64, early Apple IIs, etc.
+#[derive(Copy, Clone, Debug)]
 pub struct Nmos6502;
 
 impl crate::Variant for Nmos6502 {
@@ -575,8 +577,9 @@ impl crate::Variant for Nmos6502 {
     }
 }
 
-/// The Ricoh variant which has no decimal mode. This is what to use if you want to emulate the
-/// NES.
+/// The Ricoh variant which has no decimal mode. This is what to use if you want
+/// to emulate the NES.
+#[derive(Copy, Clone, Debug)]
 pub struct Ricoh2a03;
 
 impl crate::Variant for Ricoh2a03 {
@@ -596,6 +599,7 @@ impl crate::Variant for Ricoh2a03 {
 
 /// Emulates some very early 6502s which have no ROR instruction. This one is used in very early
 /// KIM-1s.
+#[derive(Copy, Clone, Debug)]
 pub struct RevisionA;
 
 impl crate::Variant for RevisionA {
@@ -609,6 +613,7 @@ impl crate::Variant for RevisionA {
 }
 
 /// Emulates the 65C02, which has a few bugfixes, and another addressing mode
+#[derive(Copy, Clone, Debug)]
 pub struct Cmos6502;
 
 impl crate::Variant for Cmos6502 {

src/lib.rs

@@ -25,15 +25,29 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 
+#![warn(clippy::all, clippy::pedantic)]
+#![warn(
+    absolute_paths_not_starting_with_crate,
+    rustdoc::invalid_html_tags,
+    missing_copy_implementations,
+    missing_debug_implementations,
+    semicolon_in_expressions_from_macros,
+    unreachable_pub,
+    unused_crate_dependencies,
+    unused_extern_crates,
+    variant_size_differences,
+    clippy::missing_const_for_fn
+)]
+#![deny(anonymous_parameters, macro_use_extern_crate, pointer_structural_match)]
+#![allow(clippy::module_name_repetitions)]
+// Registers and ops follow the 6502 naming convention and have similar names at
+// times
+#![allow(clippy::similar_names)]
+#![allow(clippy::match_same_arms)]
+#![allow(clippy::too_many_lines)]
 #![no_std]
 
 #[doc = include_str!("../README.md")]
-#[macro_use]
-extern crate log;
-
-#[macro_use]
-extern crate bitflags;
-
 pub mod cpu;
 pub mod instruction;
 pub mod memory;

src/memory.rs

@@ -47,7 +47,7 @@ pub const IRQ_INTERRUPT_VECTOR_HI: u16 = 0xFFFF;
 const MEMORY_SIZE: usize = (ADDR_HI_BARE - ADDR_LO_BARE) as usize + 1usize;
 
 // FIXME: Should this use indirection for `bytes`?
-#[derive(Copy, Clone)]
+#[derive(Copy, Clone, Debug)]
 pub struct Memory {
     bytes: [u8; MEMORY_SIZE],
 }
@@ -58,10 +58,37 @@ impl Default for Memory {
     }
 }
 
+/// Trait for a bus that can read and write bytes.
+///
+/// This is used to abstract the memory and I/O operations of the CPU.
+///
+/// # Examples
+///
+/// ```
+/// use mos6502::memory::{Bus, Memory};
+///
+/// let mut memory = Memory::new();
+/// memory.set_byte(0x0000, 0x12);
+/// assert_eq!(memory.get_byte(0x0000), 0x12);
+/// ```
 pub trait Bus {
+    /// Returns the byte at the given address.
     fn get_byte(&mut self, address: u16) -> u8;
+
+    /// Sets the byte at the given address to the given value.
     fn set_byte(&mut self, address: u16, value: u8);
 
+    /// Sets the bytes starting at the given address to the given values.
+    ///
+    /// This is a default implementation that calls `set_byte` for each byte.
+    ///
+    /// # Note
+    ///
+    /// This assumes that the length of `values` is less than or equal to
+    /// [`u16::MAX`] (65535). If the length of `values` is greater than `u16::MAX`,
+    /// this will truncate the length. This assumption is made because the
+    /// maximum addressable memory for the 6502 is 64KB.
+    #[allow(clippy::cast_possible_truncation)]
     fn set_bytes(&mut self, start: u16, values: &[u8]) {
         for i in 0..values.len() as u16 {
             self.set_byte(start + i, values[i as usize]);
@@ -70,7 +97,8 @@ pub trait Bus {
 }
 
 impl Memory {
-    pub fn new() -> Memory {
+    #[must_use]
+    pub const fn new() -> Memory {
         Memory {
             bytes: [0; MEMORY_SIZE],
         }
@@ -82,12 +110,14 @@ impl Bus for Memory {
         self.bytes[address as usize]
     }
 
-    // Sets the byte at the given address to the given value and returns the
-    // previous value at the address.
+    /// Sets the byte at the given address to the given value and returns the
+    /// previous value at the address.
     fn set_byte(&mut self, address: u16, value: u8) {
         self.bytes[address as usize] = value;
     }
 
+    /// Fast way to set multiple bytes in memory when the underlying memory is a
+    /// consecutive block of bytes.
     fn set_bytes(&mut self, start: u16, values: &[u8]) {
         let start = start as usize;
 
@@ -103,7 +133,7 @@ mod tests {
     use super::*;
 
     #[test]
-    #[should_panic]
+    #[should_panic(expected = "range end index 65537 out of range for slice of length 65536")]
     fn test_memory_overflow_panic() {
         let mut memory = Memory::new();
         memory.set_bytes(0xFFFE, &[1, 2, 3]);

src/registers.rs

@@ -25,8 +25,11 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 
+use bitflags::bitflags;
+
 // Useful for constructing Status instances
-#[derive(Copy, Clone)]
+#[derive(Copy, Clone, Debug)]
+#[allow(clippy::struct_excessive_bools)]
 pub struct StatusArgs {
     pub negative: bool,
     pub overflow: bool,
@@ -39,7 +42,8 @@ pub struct StatusArgs {
 }
 
 impl StatusArgs {
-    pub fn none() -> StatusArgs {
+    #[must_use]
+    pub const fn none() -> StatusArgs {
         StatusArgs {
             negative: false,
             overflow: false,
@@ -71,6 +75,7 @@ bitflags! {
 }
 
 impl Status {
+    #[must_use]
     pub fn new(
         StatusArgs {
             negative,
@@ -86,28 +91,28 @@ impl Status {
         let mut out = Status::empty();
 
         if negative {
-            out |= Status::PS_NEGATIVE
+            out |= Status::PS_NEGATIVE;
         }
         if overflow {
-            out |= Status::PS_OVERFLOW
+            out |= Status::PS_OVERFLOW;
         }
         if unused {
-            out |= Status::PS_UNUSED
+            out |= Status::PS_UNUSED;
         }
         if brk {
-            out |= Status::PS_BRK
+            out |= Status::PS_BRK;
         }
         if decimal_mode {
-            out |= Status::PS_DECIMAL_MODE
+            out |= Status::PS_DECIMAL_MODE;
         }
         if disable_interrupts {
-            out |= Status::PS_DISABLE_INTERRUPTS
+            out |= Status::PS_DISABLE_INTERRUPTS;
         }
         if zero {
-            out |= Status::PS_ZERO
+            out |= Status::PS_ZERO;
         }
         if carry {
-            out |= Status::PS_CARRY
+            out |= Status::PS_CARRY;
         }
 
         out
@@ -146,7 +151,8 @@ impl Default for Status {
 pub struct StackPointer(pub u8);
 
 impl StackPointer {
-    pub fn to_u16(self) -> u16 {
+    #[must_use]
+    pub const fn to_u16(self) -> u16 {
         let StackPointer(val) = self;
         u16::from_le_bytes([val, 0x01])
     }
@@ -177,6 +183,7 @@ impl Default for Registers {
 }
 
 impl Registers {
+    #[must_use]
     pub fn new() -> Registers {
         // TODO akeeton: Revisit these defaults.
         Registers {