marqs
dcd3d14a53
fix applying of power-on default settings
2018-04-13 01:24:34 +03:00
marqs
37650ca22b
misc improvements
...
* add character LCD backlight timeout option
* increase h.mask range
* show accurate (fpga-calculated) timings on infoscreen
2018-03-28 20:09:40 +03:00
marqs
5422953f30
minor optimizations
2018-03-25 00:32:06 +02:00
Ari Sundholm
b464a9224b
Improve avoidance of profile load induced profile loads
...
It was buggy anyway, as pointed out by borti4938.
2018-03-15 13:28:37 +02:00
Ari Sundholm
0bb490faa0
Don't automagically update profile->input link
2018-03-15 13:27:12 +02:00
Ari Sundholm
5852eb3465
Prevent profile loads induced by profile loads
2018-03-15 13:27:12 +02:00
Ari Sundholm
f337852e19
Implement two-way profile linking in a minimalistic way
2018-03-15 13:27:12 +02:00
borti4938
6278e1026d
some code space optimization
2018-03-12 08:05:09 +01:00
marqs
9ad696dbc3
optimize away one pp stage and unify code formatting
2018-03-12 01:25:23 +02:00
borti4938
852054cdd0
finer granulated steps for hybrid sl settings
2018-03-07 10:21:18 +01:00
borti4938
0828addc83
Merge branch 'release' of https://github.com/marqs85/ossc into upstream
2018-03-07 08:29:49 +01:00
marqs
0ab31b30b4
simplify timing constraints
2018-03-07 09:21:19 +02:00
marqs
bd1d58660c
Add detection for 640x400 VGA Mode 13h
2018-03-06 23:52:10 +02:00
borti4938
10eff56f28
Merge branch 'release' of https://github.com/marqs85/ossc into upstream
2018-03-06 09:41:59 +01:00
borti4938
670f515141
various post processing pipeline updates:
...
- increase number of pipeline stages for scanline generation
- alternative hybrid strength implementation
- add missing file declaration in qsf
2018-03-06 09:36:21 +01:00
borti4938
3154a83847
re-rename of sl gen option
2018-03-06 09:33:57 +01:00
borti4938
0b51fd7758
- resolve conflicts from merge
...
- use hybrid contrast for both sl generation methods: multiplication and linear
2018-03-06 09:32:02 +01:00
borti4938
1a405c1e2e
Merge branch 'scanline_contrast' of https://github.com/paulb-nl/ossc into upstream
...
# Conflicts:
# rtl/scanconverter.v
# software/sys_controller/ossc/av_controller.c
2018-03-06 09:30:22 +01:00
marqs
bc1b7419f2
pcm1862: add pre-ADC gain setting
2018-03-02 23:11:52 +02:00
paulb-nl
990bc1563e
Add Scanline contrast
...
Reduce scanline strength for bright pixels
2018-02-24 21:56:18 +01:00
marqs
1cc42b808d
pcm1862: fix ADC clkdiv value and use low-latency IIR filter
2018-02-22 22:48:00 +02:00
borti4938
5249d313d8
scanlines generation via multiplication
2018-02-22 08:11:26 +01:00
marqs
bee64c6fbc
allow profile link (to each logical input) via a menu option
2017-12-11 00:51:50 +02:00
Ari Sundholm
04c9137e29
Move default input field from profiles to initconfig
...
This makes things consistent. Without this change, the default
input would be dictated by the profile associated with AV1.
2017-11-11 00:45:49 +02:00
Ari Sundholm
d638b6a650
Shrink write_userdata() by 20 bytes
2017-11-11 00:25:33 +02:00
Ari Sundholm
571b588da7
Shrink the code by 16 bytes by using an array to map values
2017-11-11 00:25:33 +02:00
Ari Sundholm
ab61fd0c67
Don't save initconfig every time the physical input and profile change
...
This spares the Flash from some unnecessary writes. If the profile
tied to a physical input changes, this change will be reflected in the
initconfig when the new profile is loaded.
2017-11-11 00:25:33 +02:00
Ari Sundholm
1979bdb333
Save the last profile used for each physical input
2017-11-02 23:38:43 +02:00
marqs
3b8b200d6f
Merge branch 'patch-10' of git://github.com/511141/ossc into 511141-patch-10
2017-10-28 12:11:34 +03:00
marqs
a24d6b0e3a
Update latency tester
...
* Enable operation with all sources
* Measure strobe length on low-persistence displays
2017-10-28 12:10:54 +03:00
marqs
4ae3423acb
Update Makefile and README
2017-10-26 00:56:07 +03:00
511141
2925ca389b
Update menu.c
2017-10-24 03:47:44 +11:00
marqs
1bf279b2a7
Initial latency tester implementation
2017-10-22 22:45:29 +03:00
marqs
4b21a354b4
Fix and optimize reverse lpf activation
2017-10-12 02:31:19 +03:00
marqs
0ab713a870
Merge branch 'lpf' of git://github.com/paulb-nl/ossc into paulb-nl-lpf
2017-10-11 07:36:00 +03:00
marqs
f5f95fe8c3
Merge branch 'patch-9' of git://github.com/511141/ossc into 511141-patch-9
2017-10-11 07:34:25 +03:00
marqs
a0c0620022
Use native 2x sampling only if h_total is below 1400
2017-10-11 07:33:52 +03:00
511141
2ff14280e5
Update
...
Noticed errors when using prototype board provided.
Additionally simplified specific menu names.
2017-10-01 14:20:50 +11:00
paulb-nl
ac16008076
Add reverse LPF feature
...
reverse LPF can be used to mostly reverse the blur on pre 1-CHIP SNES.
For best results use 256x240 optimized mode.
2017-09-27 22:43:26 +02:00
marqs
9d14cc776e
Misc small fixes and improvements
...
* Disable 480p scanlines in auto mode
* Remove inoperable 3x/4x processing modes from 1080i list
* Add 640x512 mode to 480p group and limit 480p sampler option to 525-line modes
* Fix occasional pixel repetion issue after HDMI<->DVI TX switch
* Add "Allow upsample2x" option
* Add comments to some unclear sections
2017-08-10 00:06:35 +03:00
marqs
2cd36cdd37
Fix PCM1862 input selection.
2017-06-12 01:00:34 +03:00
marqs85
a8887ce47d
Merge pull request #11 from 511141/patch-7
...
Language update
2017-06-11 11:52:34 +03:00
511141
fb8751da1e
language update
2017-06-07 13:17:17 +10:00
marqs
30af6b72f2
Merge branch 'release' of https://github.com/marqs85/ossc into release
2017-06-05 20:04:04 +03:00
borti4938
e9fbf2a1b9
bugfix: screwed up register definitions
2017-06-04 23:24:23 +02:00
marqs
cabc04b3b0
Add support for v1.6 pcb with PCM1862.
2017-06-05 00:02:01 +03:00
borti4938
5b5c8bc373
Update it6613_drv.c
...
lines outdated
2017-06-01 22:29:24 +02:00
borti4938
b471589ae1
Bugfix: audio down-sampling setting, clock settings
2017-06-01 21:23:22 +02:00
marqs
2aee3294e3
Fix HDTV mode parameters
2017-05-30 21:16:03 +03:00
marqs
2577470abe
Clean up TX setup code and add compatibility options
2017-05-29 20:43:24 +03:00
