xa65/xa/man/xa.1

.TH XA "1" "24 November 2021"

.SH NAME
xa \- 6502/R65C02/65816 cross-assembler

.SH SYNOPSIS
.B xa
[\fIOPTION\fR]... \fIFILE\fR

.SH DESCRIPTION
.B xa
is a multi-pass cross-assembler for the 8-bit processors in the 6502 series
(such as the 6502, 65C02, 6504, 6507,
6510, 7501, 8500, 8501 and 8502), the Rockwell R65C02, and
the 16-bit 65816 processor. For a description of syntax, see
.B ASSEMBLER SYNTAX
further in this manual page.

.SH OPTIONS
.TP
.B \-v
Verbose output.
.TP
.B \-C
No CMOS opcodes (default is to allow R65C02 opcodes).
.TP
.B \-W
No 65816 opcodes (default).
.TP
.B \-w
Allow 65816 opcodes.
.TP
.B \-B
Show lines with block open/close (see
.BR PSEUDO-OPS ).
.TP
.B \-c
Produce o65 object files instead of executable files
(no linking performed); files may contain undefined references.
.TP
.B \-o filename
Set output filename. The default is 
.BR a.o65 ;
use the special filename
.BR \-
to output to standard output.
.TP
.B \-e filename
Set errorlog filename, default is none.
.TP
.B \-l filename
Set labellist filename, default is none. This is the symbol table and can
be used by disassemblers such as
.BR dxa (1)
to reconstruct source.
.TP
.B \-r
Add cross-reference list to labellist (requires
.BR \-l ).
.TP
.B \-M
Allow colons to appear in comments; for MASM compatibility. This does
not affect colon interpretation elsewhere.
.TP
.B \-R
Start assembler in relocating mode.
.TP
.B \-Llabel
Defines
.B label
as an absolute (but undefined) label even when linking.
.TP
.B \-b? addr
Set segment base for segment 
.B ?
to address
.BR addr \&. 
.B ?
should be t, d, b or z for text, data, bss or zero segments, respectively.
.TP
.B \-A addr
Make text segment start at an address such that when the file
starts at address
.BR addr ,
relocation is not necessary. Overrides
.BR \-bt ;
other segments still have to be taken care of with
.BR \-b \&.

.TP
.B \-G
Suppress list of exported globals.
.TP
.B \-DDEF=TEXT
Define a preprocessor macro on the command line (see
.BR PREPROCESSOR ).
.TP
.B \-I dir
Add directory 
.B dir
to the include path (before
.BR XAINPUT ;
see
.BR ENVIRONMENT ).
.TP
.B \-O charset 
Define the output charset for character strings. Currently supported are ASCII
(default), PETSCII (Commodore ASCII),
PETSCREEN (Commodore screen codes) and HIGH (set high bit on all
characters).
.TP
.B \-p?
Set the alternative preprocessor character to
.BR ? .
This is useful when you wish to use
.BR cpp (1)
and the built-in preprocessor at the same time (see
.BR PREPROCESSOR ).
Characters may need to be quoted for your shell (example:
.B \-p'~'
).
.TP
.B \-\-help
Show summary of options.
.TP
.B \-\-version
Show version of program.
.LP
The following options are
.BR deprecated
and will be removed in 2.4 and later versions:
.TP
.B \-x
Use old filename behaviour (overrides
.BR \-o ,
.B \-e
and
.BR \-l ).
.TP
.B \-S
Allow preprocessor substitution within strings (this is now disallowed
for better
.BR cpp (1)
compatibility).

.SH ASSEMBLER SYNTAX

An introduction to 6502 assembly language programming and mnemonics is
beyond the scope of this manual page. We invite you to investigate any
number of the excellent books on the subject; one useful title is "Machine
Language For Beginners" by Richard Mansfield (COMPUTE!), covering the Atari,
Commodore and Apple 8-bit systems, and is widely available on the used market.
.LP
.B xa
supports both the standard NMOS 6502 opcodes as well as the Rockwell
CMOS opcodes used in the 65C02 (R65C02). With the 
.B \-w
option,
.B xa
will also accept opcodes for the 65816. NMOS 6502
undocumented opcodes are intentionally not supported, and should be entered
manually using the
.B \.byte
pseudo-op (see
.BR PSEUDO-OPS ).
Due to conflicts between the R65C02 and 65816 instruction sets and
undocumented instructions on the NMOS 6502, their use is discouraged.
.LP
In general,
.B xa
accepts the more-or-less standard 6502 assembler format as popularised by
MASM and TurboAssembler. Values and addresses
can be expressed either as literals, or as expressions; to wit,
.TP 10
.B 123
decimal value
.TP
.B $234
hexadecimal value
.TP
.B &123
octal
.TP
.B %010110
binary
.TP
.B *
current value of the program counter
.LP
The ASCII value of any quoted character is
inserted directly into the program text (example:
.B """A"""
inserts the byte "A" into the output stream); see also the
.B PSEUDO-OPS
section. This is affected by the currently selected character set, if any.
.LP
.B Labels
define locations within the program text, just as in other multi-pass
assemblers. A label is defined by anything that is not an opcode; for
example, a line such as
.IP
.B label1 lda #0
.LP
defines
.B label1
to be the current location of the program counter (thus the
address of the
.B LDA
opcode). A label can be explicitly defined by assigning it the value of
an expression, such as
.IP
.B label2 = $d000
.LP
which defines
.B label2
to be the address $d000, namely, the start of the VIC-II register block on
Commodore 64 computers. The program counter
.B *
is considered to be a special kind of label, and can be assigned to with
statements such as
.IP
.B * = $c000
.LP
which sets the program counter to decimal location 49152. With the exception
of the program counter, labels cannot be assigned multiple times. To explicitly
declare redefinition of a label, place a - (dash) before it, e.g.,
.IP
.B \-label2 = $d020
.LP
which sets
.B label2
to the Commodore 64 border colour register. The scope of a label is affected
by the block it resides within (see
.B PSEUDO-OPS
for block instructions). A label may also be hard-specified with the
.B \-L
command line option.
.LP
Redefining a label does not change previously assembled code that used the
earlier value. Therefore, because the program counter is a special type of
label, changing the program counter to a lower value does not reorder code
assembled previously and changing it to a higher value does not issue
padding to put subsequent code at the new location. This is intentional
behaviour to facilitate generating relocatable and position-independent code,
but can differ from other assemblers which use this behaviour for
linking. However, it is possible to use pseudo-ops to simulate other
assemblers' behaviour and use
.B xa
as a linker; see
.B PSEUDO-OPS
and
.BR LINKING .
.LP
For those instructions where the accumulator is the implied argument (such as
.B asl 
and
.BR lsr ;
.B inc
and
.B dec
on R65C02; etc.), the idiom of explicitly specifying the accumulator with
.B a
is unnecessary as the proper form will be selected if there is no explicit
argument. In fact, for consistency with label handling, if there is a label
named
.BR a ,
this will actually generate code referencing that label as a memory
location and not the accumulator. Otherwise, the assembler will complain.
.LP
Labels and opcodes may take
.B expressions
as their arguments to allow computed values, and may themselves reference
other labels and/or the program counter. An expression such as
.B lab1+1
(which operates on the current value of label
.B lab1
and increments it by one) may use the following operands, given from highest
to lowest priority:
.TP 8
.B *
multiplication (priority 10)
.TP
.B /
integer division (priority 10)
.TP
.B +
addition (priority 9)
.TP
.B \-
subtraction (9)
.TP
.B <<
shift left (8)
.TP
.B >>
shift right (8)
.TP
.B >= =>
greater than or equal to (7)
.TP
.B >
greater than (7)
.TP
.B <= =<
less than or equal to (7)
.TP
.B <
less than (7)
.TP
.B =
equal to (6)
.TP
.B <> ><
does not equal (6)
.TP
.B &
bitwise AND (5)
.TP
.B ^
bitwise XOR (4)
.TP
.B |
bitwise OR (3)
.TP
.B &&
logical AND (2)
.TP
.B ||
logical OR (1)
.LP
Parentheses are valid. When redefining a label, combining arithmetic or
bitwise operators with the = (equals) operator such as
.B +=
and so on are valid, e.g.,
.IP
.B \-redeflabel += (label12/4)
.LP
Normally,
.B xa
attempts to ascertain the value of the operand and (when referring to
a memory location) use zero page,
16-bit or (for 65816) 24-bit addressing where appropriate and where
supported by the particular opcode. This generates smaller and faster
code, and is almost always preferable.
.LP
Nevertheless, you can use these prefix operators to force a particular
rendering of the operand. Those that generate an eight bit result can also be
used in 8-bit addressing modes, such as immediate and zero page.
.TP
.B <
low byte of expression, e.g.,
.B lda #<vector
.TP
.B >
high byte of expression
.TP
.B !
in situations where the expression could be understood as either an absolute
or zero page value, do not attempt to optimize to a zero page argument
for those opcodes that support it (i.e., keep as 16 bit word)
.TP
.B @
render as 24-bit quantity for 65816 (must specify
.B \-w
command-line option).
.B This is required to specify any
.B 24-bit quantity!
.TP
.B `
force further optimization, even if the length of the instruction cannot
be reliably determined (see
.BR NOTES'N'BUGS )
.LP
Expressions can occur as arguments to opcodes or within the preprocessor
(see 
.B PREPROCESSOR
for syntax). For example,
.IP
.B lda label2+1
.LP
takes the value at
.B label2+1
(using our previous label's value, this would be $d021), and will be assembled
as
.B $ad $21 $d0
to disk. Similarly,
.IP
.B lda #<label2 
.LP
will take the lowest 8 bits of
.B label2
(i.e., $20), and assign them to the accumulator (assembling the instruction as
.B $a9 $20
to disk).
.LP
Comments are specified with a semicolon (;), such as
.IP
.B ;this is a comment
.LP
They can also be specified in the C language style, using
.B /* */
and
.B //
which are understood at the
.B PREPROCESSOR
level (q.v.).
.LP
Normally, the colon (:) separates statements, such as
.IP
.B label4 lda #0:sta $d020
.LP
or
.IP
.B label2: lda #2
.LP
(note the use of a colon for specifying a label, similar to some other
assemblers, which
.B xa
also understands with or without the colon). This also applies to semicolon
comments, such that
.IP
.B ; a comment:lda #0
.LP
is understood as a comment followed by an opcode. To defeat this, use the
.B \-M
command line option to allow colons within comments. This does not apply to
.B /* */
and
.B //
comments, which are dealt with at the preprocessor level (q.v.).

.SH PSEUDO-OPS

.B Pseudo-ops
are false opcodes used by the assembler to denote meta- or inlined commands.
Like most assemblers,
.B xa
has a rich set.
.TP
.B .byt value1,value2,value3,...
Specifies a string of bytes to be directly placed into the assembled object.
The arguments may be expressions. Any number of bytes can be specified.
.TP
.B .asc """text1""","text2",...
Specifies a character string which will be inserted into the assembled
object. Strings are understood according to the currently specified
character set; for example, if ASCII is specified, they will be rendered as
ASCII, and if PETSCII is specified, they will be translated into the equivalent
Commodore ASCII equivalent. Other non-standard ASCIIs such as ATASCII for
Atari computers should use the ASCII equivalent characters; graphic and
control characters should be specified explicitly using 
.B .byt
for the precise character you want. Note that
when specifying the argument of an opcode,
.B .asc
is not necessary; the quoted character can simply be inserted (e.g.,
.B lda #"A"
), and is also affected by the current character set.
Any number of character strings can be specified.
.LP
.B .byt
and
.B .asc
are synonymous, so you can mix things such as
.B .byt $43, 22, """a character string"""
and get the expected result. The string is subject to the current character
set, but the remaining bytes are inserted wtihout modification.
.TP
.B .aasc """text1""","text2",...
Specifies a character string that is
.B always
rendered in true ASCII regardless of the current character set. Like
.BR .asc ,
it is synonymous with
.BR .byt .
.TP
.B .word value1,value2,value3...
Specifies a string of 16-bit words to be placed into the assembled object in
6502 little-endian format (that is, low-byte/high-byte). The arguments may
be expressions. Any number of words can be specified.
.TP
.B .dsb length,fillbyte
Specifies a data block; a total of
.B length
repetitions of
.B fillbyte
will be inserted into the assembled object. For example,
.B .dsb 5,$10
will insert five bytes, each being 16 decimal, into the object. The arguments
may be expressions. See
.B LINKING
for how to use this pseudo-op to link multiple objects.
.TP
.B .bin offset,length,"filename"
Inlines a binary file without further interpretation specified by
.B filename
from offset
.B offset
to length
.BR length .
This allows you to insert data such as a previously assembled object file
or an image or other binary data structure, inlined directly into this
file's object. If
.B length
is zero, then the length of
.BR filename ,
minus the offset, is used instead. The arguments may be expressions. See
.B LINKING
for how to use this pseudo-op to link multiple objects.
.TP
.B \&.(
Opens a new block for scoping. Within a block, all labels defined are local to
that block and any sub-blocks, and go out of scope as soon as the enclosing
block is closed (i.e., lexically scoped). All labels defined outside of the
block are still visible within it. To explicitly declare a global label within
a block, precede the label with
.B +
or precede it with
.B &
to declare it within the previous level only (or globally if you are only
one level deep). Sixteen levels of scoping are permitted.
.TP
.B \&.)
Closes a block.
.TP
.B \.as \.al \.xs \.xl
Only relevant in 65816 mode (with the
.B \-w
option specified). These pseudo-ops set what size accumulator and X/Y-register
should be used for future instructions;
.B .as
and
.B .xs
set 8-bit operands for the accumulator and index registers, respectively, and
.B .al
and
.B .xl
set 16-bit operands. These pseudo-ops on purpose do not automatically issue
.B sep
and
.B rep
instructions to set the specified width in the CPU;
set the processor bits as you need, or consider constructing
a macro.
.B \.al
and
.B \.xl
generate errors if
.B \-w
is not specified.
.LP
The following pseudo-ops apply primarily to relocatable .o65 objects.
A full discussion of the relocatable format is beyond the
scope of this manpage, as it is currently a format in flux. Documentation
on the proposed v1.2 format is in 
.B doc/fileformat.txt
within the
.B xa
installation directory.
.TP
.B .text .data .bss .zero
These pseudo-ops switch between the different segments, .text being the actual
code section, .data being the data segment, .bss being uninitialized label
space for allocation and .zero being uninitialized zero page space for
allocation. In .bss and .zero, only labels are evaluated. These pseudo-ops
are valid in relative and absolute modes.
.TP
.B .align value
Aligns the current segment to a byte boundary (2, 4 or 256) as specified by
.B
value
(and places it in the header when relative mode is enabled). Other values
generate an error.
.TP
.B .fopt type,value1,value2,value3,...
Acts like
.B .byt/.asc
except that the values are embedded into the object file as file options.
The argument
.B type
is used to specify the file option being referenced. A table of these options
is in the relocatable o65 file format description. The remainder of the options
are interpreted as values to insert. Any number of values may be specified,
and may also be strings.

.SH PREPROCESSOR

.B xa
implements a preprocessor very similar to that of the C-language preprocessor
.BR cpp (1)
and many oddiments apply to both. For example, as in C, the use of
.B /* */
for comment delimiters is also supported in
.BR xa ,
and so are comments using the double slash
.BR // .
The preprocessor also supports continuation lines, i.e., lines ending with
a backslash (\\); the following line is then appended to it as if there were
no dividing newline. This too is handled at the preprocessor level.
.LP
For reasons of memory and complexity, the full breadth of the
.BR cpp (1)
syntax is not fully supported. In particular, macro definitions may not
be forward-defined (i.e., a macro definition can only reference a previously
defined macro definition), except for macro functions, where recursive
evaluation is supported; e.g., to
.B #define WW AA
,
.B AA
must have already been defined. Certain other directives are not supported,
nor are most standard pre-defined macros, and there are other
limits on evaluation and line length. Because the maintainers of
.B xa
recognize that some files will require more complicated preparsing than the
built-in preprocessor can supply, the preprocessor will accept
.BR cpp (1)-style
line/filename/flags output. When these lines are seen in the input file,
.B xa
will treat them as
.B cc
would, except that flags are ignored.
.B xa
does not accept files on standard input for parsing reasons, so you should
dump your
.BR cpp (1)
output to an intermediate temporary file, such as
.IP
.B cc -E test.s > test.xa
.br
.B xa test.xa
.LP
No special arguments need to be passed to
.BR xa ;
the presence of
.BR cpp (1)
output is detected automatically.
.LP
Note that passing your file through
.BR cpp (1)
may interfere with
.BR xa 's
own preprocessor directives. In this case, to mask directives from
.BR cpp (1),
use the
.B \-p
option to specify an alternative character instead of
.BR # ,
such as the tilde (e.g.,
.B \-p'~'
). With this option and argument specified, then instead of
.BR #include ,
for example, you can also use
.BR ~include ,
in addition to
.B #include 
(which will also still be accepted by the
.B xa
preprocessor, assuming any survive
.BR cpp (1)).
Any character can be used, although frankly pathologic choices may lead
to amusing and frustrating glitches during parsing.
You can also use this option to defer preprocessor directives that
.BR cpp (1)
may interpret too early until the file actually gets to
.B xa
itself for processing.
.LP
The following preprocessor directives are supported.

.TP
.B #include """filename"""
Inserts the contents of file
.B filename
at this position. If the file is not found, it is searched using paths
specified by the
.B \-I
command line option or the environment variable
.B XAINPUT
(q.v.). When inserted, the file will also be parsed for preprocessor
directives.
.TP
.B #echo comment
Inserts comment
.B comment
into the errorlog file, specified with the
.B \-e
command line option.
.TP
.B #print expression
Computes the value of expression
.B expression
and prints it into the errorlog file.
.TP
.B #define DEFINE text
Equates macro
.B DEFINE
with text
.B text
such that wherever
.B DEFINE
appears in the assembly source,
.B text
is substituted in its place (just like
.BR cpp (1)
would do). In addition,
.B #define
can specify macro functions like
.BR cpp (1)
such that a directive like
.B #define mult(a,b) ((a)*(b))
would generate the expected result wherever an expression of the form
.B mult(a,b)
appears in the source. This can also be specified on the command line with
the
.B \-D
option. The arguments of a macro function may be recursively evaluated,
unlike other
.BR #define s;
the preprocessor will attempt to re-evaluate any argument refencing
another preprocessor definition up to ten times before complaining.
.LP
The following directives are conditionals. If the conditional is not
satisfied, then the source code between the directive and its terminating
.B #endif
are expunged and not assembled. Up to fifteen levels of nesting are supported.
.TP
.B #endif
Closes a conditional block.
.TP
.B #else
Implements alternate path for a conditional block.
.TP
.B #ifdef DEFINE
True only if macro
.B DEFINE
is defined.
.TP
.B #ifndef DEFINE
The opposite; true only if macro
.B DEFINE
has not been previously defined.
.TP
.B #if expression
True if expression
.B expression
evaluates to non-zero.
.B expression
may reference other macros.
.TP
.B #iflused label
True if label
.B label
has been used (but not necessarily instantiated with a value).
.I This works on labels, not macros!
.TP
.B #ifldef label
True if label
.B label
is defined
.I and
assigned with a value.
.I This works on labels, not macros!
.LP
Unclosed conditional blocks at the end of included files generate warnings;
unclosed conditional blocks at the end of assembly generate an error.
.LP
.B #iflused
and
.B #ifldef
are useful for building up a library based on labels. For example,
you might use something like this in your library's code:
.IP
.B #iflused label
.br
.B #ifldef  label
.br
.B #echo    label already defined, library function label cannot be inserted
.br
.B #else
.br
.B label    /* your code */
.br
.B #endif
.br
.B #endif

.SH LINKING

.B xa
is oriented towards generating sequential binaries. Code is strictly
emitted in order even if the program counter is set to a lower location
than previously assembled code, and padding is not automatically emitted
if the program counter is set to a higher location. Changing the program
location only changes new labels for code that is subsequently emitted;
previous emitted code remains unchanged. Fortunately, for many object files
these conventions have no effect on their generation.
.LP
However, some applications may require generating an object file built
from several previously generated components, and/or submodules which
may need to be present at specific memory locations. With a minor amount of
additional specification, it is possible to use
.B xa
for this purpose as well.
.LP
The first means of doing so uses the o65 format to make relocatable objects
that in turn can be linked by
.BR ldo65 (1)
(q.v.).
.LP
The second means involves either assembled code, or insertion of
previously built object or data files with
.BR .bin ,
using
.B .dsb
pseudo-ops with computed expression arguments to insert any necessary padding
between them, in the sequential order they are to reside in memory. Consider
this example:
.LP

.br
    .word $1000
.br
    * = $1000
.br

.br
    ; this is your code at $1000
.br
part1       rts
.br
    ; this label marks the end of code
.br
endofpart1
.br

.br
    ; DON'T PUT A NEW .word HERE!
.br
    * = $2000
.br
    .dsb (*-endofpart1), 0
.br
    ; yes, set it again
.br
    * = $2000
.br

.br
    ; this is your code at $2000
.br
part2       rts
.br
.LP
This example, written for Commodore microcomputers using a 16-bit starting
address, has two "modules" in it: one block of code at $1000 (4096),
indicated by the code between labels
.B part1
and
.BR endofpart1 ,
and a second block at $2000 (8192) starting at label
.BR part2 .
.LP
The padding is computed by the
.B .dsb
pseudo-op between the two modules. Note that the program counter is set
to the new address and then a computed expression inserts the proper number
of fill bytes from the end of the assembled code in part 1 up to the new
program counter address. Since this itself advances the program counter,
the program counter is reset again, and assembly continues.
.LP
When the object this source file generates is loaded, there will be an
.B rts
instruction at address 4096 and another at address 8192, with null bytes
between them.
.LP
Should one of these areas need to contain a pre-built file, instead of
assembly code, simply use a
.B .bin
pseudo-op to load whatever portions of the file are required into the
output. The computation of addresses and number of necessary fill bytes
is done in the same fashion.
.LP
Although this example used the program counter itself to compute the
difference between addresses, you can use any label for this purpose,
keeping in mind that only the program counter determines where relative
addresses within assembled code are resolved.

.SH ENVIRONMENT

.B xa
utilises the following environment variables, if they exist:

.TP
.B XAINPUT
Include file path; components should be separated by `,'.
.TP
.B XAOUTPUT
Output file path.

.SH NOTES'N'BUGS
The R65C02 instructions
.B ina
(often rendered
.B inc
.BR a )
and
.B dea
.RB ( dec
.BR a )
must be rendered as bare
.B inc
and
.B dec
instructions respectively.
.LP
The 65816 instructions
.B mvn
and
.B mvp
use two eight bit parameters, the only instructions in the entire
instruction set to do so. Older versions of
.B xa
took a single 16-bit absolute value. Since 2.3.7, the standard syntax is
now accepted and the old syntax is deprecated (a warning will be generated).
.LP
Forward-defined labels -- that is, labels that are defined after the current
instruction is processed -- cannot be optimized into zero
page instructions even if the label does end up being defined as a zero page
location, because the assembler does not know the value of the label in
advance during the first pass when the length of an
instruction is computed. On the second pass, a warning will be issued when an
instruction that could have been optimized can't be because of this limitation.
(Obviously, this does not apply to branching or jumping instructions because
they're not optimizable anyhow, and those instructions that can
.I only
take an 8-bit parameter will always be casted to an 8-bit quantity.)
If the label cannot otherwise be defined ahead of the instruction, the backtick
prefix
.B `
may be used to force further optimization no matter where the label is defined
as long as the instruction supports it.
Indiscriminately forcing the issue can be fraught with peril, however, and
is not recommended; to discourage this, the assembler will complain about its
use in addressing mode situations where no ambiguity exists, such as indirect
indexed, branching and so on.
.LP
Also, as a further consequence of the way optimization is managed, we repeat
that
.B all
24-bit quantities and labels that reference a 24-bit quantity in 65816 mode,
anteriorly declared or otherwise,
.B MUST
be prepended with the
.B @
prefix. Otherwise, the assembler will attempt to optimize to 16 bits, which
may be undesirable. 

.SH "IMMINENT DEPRECATION"
The following options and modes will be
.B REMOVED
in 2.4 and later versions of
.BR xa :
.LP
.B \-x
.LP
.B \-S
.LP
the original
.B mvn $xxxx
syntax

.SH "SEE ALSO"
.BR file65 (1),
.BR ldo65 (1),
.BR printcbm (1),
.BR reloc65 (1),
.BR uncpk (1),
.BR dxa (1)

.SH AUTHOR
This manual page was written by David Weinehall <tao@acc.umu.se>,
Andre Fachat <fachat@web.de>
and Cameron Kaiser <ckaiser@floodgap.com>.
Original xa package (C)1989-1997 Andre Fachat. Additional changes
(C)1989-2021 Andre Fachat, Jolse Maginnis, David Weinehall,
Cameron Kaiser. The official maintainer is Cameron Kaiser.

.SH 30 YEARS OF XA
Yay us?

.SH WEBSITE
http://www.floodgap.com/retrotech/xa/