mirror of
https://github.com/flowenol/apple1serial.git
synced 2024-12-22 03:29:51 +00:00
added BASE and OFFSET defs, additional mapping starting at C300
This commit is contained in:
flowenol
Piotr Jaczewski
parent
b147de89a5
commit
6b3f439e94
12
Makefile
12
Makefile
@ -8,10 +8,14 @@ $(SUBDIRS):
|
||||
|
||||
.PHONY: $(TOPTARGETS) $(SUBDIRS)
|
||||
|
||||
apple1serial.bin:
|
||||
xa -W -C -v -O ASCII -c src/apple1serial.a65 -l apple1serial.label -o apple1serial.bin
|
||||
apple1serial-C000.bin:
|
||||
xa -DOFFSET="0" -W -C -v -O ASCII -c src/apple1serial.a65 -l apple1serial-C000.label -o apple1serial-C000.bin
|
||||
|
||||
all: apple1serial.bin
|
||||
apple1serial-C300.bin:
|
||||
xa -DOFFSET="768" -W -C -v -O ASCII -c src/apple1serial.a65 -l apple1serial-C300.label -o apple1serial-C300.bin
|
||||
|
||||
|
||||
all: apple1serial-C000.bin apple1serial-C300.bin
|
||||
|
||||
clean:
|
||||
rm apple1serial.bin apple1serial.label
|
||||
rm -f apple1serial*.bin apple1serial*.label
|
||||
|
||||
10
README.md
10
README.md
@ -57,6 +57,16 @@ The contents of this repository are as following:
|
||||
* src/ - contains the 6502 assembly sources for the A1SI onboard ROM routines
|
||||
* scripts/ - contains python based file transfer utility
|
||||
|
||||
## Mappings
|
||||
|
||||
There are two .jed files for the GAL20V8 based address decoder:
|
||||
|
||||
1. **address_decoder-C000.jed** - defines the standard mapping where the device mimics the original ACI loader program at `$C100`.
|
||||
2. **address_decoder-C300.jed** - defines an alternative mapping allowing tu run Apple-1 Serial Interface together with the original ACI within the same system.
|
||||
All program and hardware entries are shifted by offset `$300`, so the loader program can be accessed at `$C400`.
|
||||
|
||||
|
||||
|
||||
## Requirements
|
||||
|
||||
You need the following to successfully build the firmware:
|
||||
|
||||
15
mapping/address_decoder-C300.eqn
Normal file
15
mapping/address_decoder-C300.eqn
Normal file
@ -0,0 +1,15 @@
|
||||
chip GAL20V8
|
||||
|
||||
NC3=1 RW=2 A0=11 A1=10 A2=9 A3=8 A4=7 A5=6 A6=5 A7=4 A8=3 GND=12
|
||||
A9=16 A10=15 A11=14 SR=17 RD=18 WD=19 ROM=20 RES=21 PHI=22
|
||||
T=23 VCC=24
|
||||
|
||||
equations
|
||||
|
||||
SR = /A0 * /A1 * /A2 * /A3 * /A4 * /A5 * /A6 * /A7 * A8 * A9 * /A10 * /A11 * /T * RW
|
||||
RD = /A0 * /A1 * /A2 * /A3 * /A4 * /A5 * /A6 * A7 * A8 * A9 * /A10 * /A11 * /T * RW
|
||||
WD = A0 * /A1 * /A2 * /A3 * /A4 * /A5 * /A6 * A7 * A8 * A9 * /A10 * /A11 * /T * /RW * PHI
|
||||
/ROM = /A11 * A10 * /T * RW
|
||||
+ A11 * /A10 * /T * RW
|
||||
+ A2 * A3 * A4 * A5 * A6 * A7 * A8 * A9 * /A10 * /A11 * /T * RW
|
||||
RES = A0 * /A1 * /A2 * /A3 * /A4 * /A5 * /A6 * /A7 * A8 * A9 * /A10 * /A11 * /T * RW
|
||||
33
mapping/address_decoder-C300.jed
Normal file
33
mapping/address_decoder-C300.jed
Normal file
@ -0,0 +1,33 @@
|
||||
|
||||
GAL20V8
|
||||
EQN2JED - Boolean Equations to JEDEC file assembler (Version V101)
|
||||
Copyright (c) National Semiconductor Corporation 1990-1993
|
||||
Assembled from "ADDRES~1.EQN". Date: 1-13-123
|
||||
*
|
||||
NOTE PINS RW:2 A8:3 A7:4 A6:5 A5:6 A4:7 A3:8 A2:9 A1:10 A0:11*
|
||||
NOTE PINS GND:12 A11:14 A10:15 A9:16 SR:17 RD:18 WD:19 ROM:20*
|
||||
NOTE PINS RES:21 PHI:22 T:23 VCC:24*
|
||||
NOTE GALMODE SMALL*
|
||||
QF2706*QP24*F0*
|
||||
L0320
|
||||
0111011010111011101110111001101010100111*
|
||||
L0640
|
||||
0111111011111111111111111111110111101111
|
||||
0111111011111111111111111111111011011111
|
||||
0111011001110111011101110101011011101111*
|
||||
L0960
|
||||
1011011001011011101110111001101010100111*
|
||||
L1280
|
||||
0111011001111011101110111001101010101011*
|
||||
L1600
|
||||
0111011010111011101110111001101010101011*
|
||||
L2560
|
||||
01011100*
|
||||
L2632
|
||||
10000011*
|
||||
L2640
|
||||
0000000010000000111000001000000010000000100000000000000000000000*
|
||||
L2704
|
||||
10*
|
||||
C1A4F*
|
||||
0000
|
||||
73
mapping/address_decoder-C300.log
Normal file
73
mapping/address_decoder-C300.log
Normal file
@ -0,0 +1,73 @@
|
||||
EQN2JED - Boolean Equations to JEDEC file assembler (Version V101)
|
||||
Copyright (c) National Semiconductor Corporation 1990-1993
|
||||
|
||||
Log file for ADDRES~1.EQN
|
||||
Device: 20V8
|
||||
|
||||
Pin Label Type
|
||||
--- ----- ----
|
||||
2 RW pos,com input
|
||||
3 A8 pos,com input
|
||||
4 A7 pos,com input
|
||||
5 A6 pos,com input
|
||||
6 A5 pos,com input
|
||||
7 A4 pos,com input
|
||||
8 A3 pos,com input
|
||||
9 A2 pos,com input
|
||||
10 A1 pos,com input
|
||||
11 A0 pos,com input
|
||||
12 GND ground pin
|
||||
14 A11 pos,com input
|
||||
15 A10 pos,com input
|
||||
16 A9 pos,com input
|
||||
17 SR pos,com output
|
||||
18 RD pos,com output
|
||||
19 WD pos,com output
|
||||
20 ROM neg,com output
|
||||
21 RES pos,com output
|
||||
22 PHI pos,com input
|
||||
23 T pos,com input
|
||||
24 VCC power pin
|
||||
|
||||
EQN2JED - Boolean Equations to JEDEC file assembler (Version V101)
|
||||
Copyright (c) National Semiconductor Corporation 1990-1993
|
||||
|
||||
Device Utilization:
|
||||
|
||||
No of dedicated inputs used : 14/14 (100.0%)
|
||||
No of feedbacks used as dedicated inputs : 1/6 (16.7%)
|
||||
No of dedicated outputs used : 2/2 (100.0%)
|
||||
No of feedbacks used as dedicated outputs : 3/6 (50.0%)
|
||||
|
||||
------------------------------------------
|
||||
Pin Label Terms Usage
|
||||
------------------------------------------
|
||||
21 RES 1/8 (12.5%)
|
||||
20 ROM 3/8 (37.5%)
|
||||
19 WD 1/8 (12.5%)
|
||||
18 RD 1/8 (12.5%)
|
||||
17 SR 1/8 (12.5%)
|
||||
------------------------------------------
|
||||
Total Terms 7/64 (10.9%)
|
||||
------------------------------------------
|
||||
|
||||
EQN2JED - Boolean Equations to JEDEC file assembler (Version V101)
|
||||
Copyright (c) National Semiconductor Corporation 1990-1993
|
||||
|
||||
Chip diagram (DIP)
|
||||
|
||||
._____ _____.
|
||||
| \__/ |
|
||||
| 1 24 | VCC
|
||||
RW | 2 23 | T
|
||||
A8 | 3 22 | PHI
|
||||
A7 | 4 21 | RES
|
||||
A6 | 5 20 | ROM
|
||||
A5 | 6 19 | WD
|
||||
A4 | 7 18 | RD
|
||||
A3 | 8 17 | SR
|
||||
A2 | 9 16 | A9
|
||||
A1 | 10 15 | A10
|
||||
A0 | 11 14 | A11
|
||||
GND | 12 13 |
|
||||
|______________|
|
||||
@ -1,3 +1,11 @@
|
||||
#ifndef BASE
|
||||
#define BASE $C000
|
||||
#endif
|
||||
|
||||
#ifndef OFFSET
|
||||
#define OFFSET 0
|
||||
#endif
|
||||
|
||||
;End address of dump block
|
||||
#define hex1_l $34
|
||||
#define hex1_h $35
|
||||
@ -19,10 +27,10 @@
|
||||
#define echo $FFEF ;Echo character to terminal
|
||||
#define prbyte $FFDC
|
||||
|
||||
#define serial_ready $C000
|
||||
#define serial_reset $C001
|
||||
#define serial_read $C080
|
||||
#define serial_write $C081
|
||||
#define serial_ready BASE + OFFSET
|
||||
#define serial_reset BASE + $1 + OFFSET
|
||||
#define serial_read BASE + $80 + OFFSET
|
||||
#define serial_write BASE + $81 + OFFSET
|
||||
|
||||
|
||||
#define R_LETTER $D2
|
||||
@ -34,14 +42,14 @@
|
||||
#define SPACE $A0
|
||||
|
||||
; pad first 252 bytes with zeroes
|
||||
.dsb 252, 0
|
||||
.dsb 252 + OFFSET, 0
|
||||
|
||||
; include identification bytes
|
||||
.byt "A1SI"
|
||||
|
||||
; this section is almost identical to original WOZ ACI
|
||||
; adapted from https://www.sbprojects.net/projects/apple1/aci.php
|
||||
* = $C100
|
||||
* = BASE + $100 + OFFSET
|
||||
apple_serial
|
||||
lda #CR ;Drop the cursor one line
|
||||
jsr echo
|
||||
|
||||
@ -4,9 +4,9 @@
|
||||
; regarding the IO of the serial interface.
|
||||
;-------------------------------------------------------------------------
|
||||
|
||||
#define serial_ready $C000
|
||||
#define serial_read $C080
|
||||
#define serial_write $C081
|
||||
#define serial_ready BASE + $000 + OFFSET
|
||||
#define serial_read BASE + $080 + OFFSET
|
||||
#define serial_write BASE + $081 + OFFSET
|
||||
|
||||
;-------------------------------------------------------------------------
|
||||
; Memory declaration
|
||||
@ -64,9 +64,9 @@
|
||||
; Let's get started
|
||||
;-------------------------------------------------------------------------
|
||||
|
||||
* = $C600
|
||||
* = BASE + $600 + OFFSET
|
||||
.dsb (*-end_of_counter_remote), 0
|
||||
* = $C600
|
||||
* = BASE + $600 + OFFSET
|
||||
|
||||
reset
|
||||
jsr reset_serial
|
||||
|
||||
@ -1,22 +1,22 @@
|
||||
#define echo $FFEF
|
||||
#define kbd_data $D010
|
||||
#define kbd_cr $D011
|
||||
#define serial_ready $C000
|
||||
#define serial_read $C080
|
||||
#define serial_write $C081
|
||||
#define serial_ready BASE + $000 + OFFSET
|
||||
#define serial_read BASE + $080 + OFFSET
|
||||
#define serial_write BASE + $081 + OFFSET
|
||||
|
||||
; How to store INTEGER BASIC progams?
|
||||
; C100R - run serial monitor
|
||||
; C100( + OFFSET)R - run serial monitor
|
||||
; 004A.00FFW 0800.0FFFW - write data for default LOMEM & HIMEM
|
||||
; E2B3R - warm entry point
|
||||
|
||||
* = $C300
|
||||
* = BASE + $300 + OFFSET
|
||||
.dsb (*-end_of_apple1serial), 0
|
||||
|
||||
; teletype on apple-1
|
||||
; the data from remote appears on apple-1 screen
|
||||
* = $C300
|
||||
teletype_apple1 = $C300
|
||||
* = BASE + $300 + OFFSET
|
||||
teletype_apple1 = BASE + $300 + OFFSET
|
||||
jsr reset_serial
|
||||
lda serial_read
|
||||
teletype_apple1_wait
|
||||
@ -29,11 +29,11 @@ end_of_teletype_apple1
|
||||
|
||||
; teletype on remote
|
||||
; the data from apple-1 appears on remote
|
||||
* = $C400
|
||||
* = BASE + $400 + OFFSET
|
||||
.dsb (*-end_of_teletype_apple1), 0
|
||||
|
||||
* = $C400
|
||||
teletype_remote = $C400
|
||||
* = BASE + $400 + OFFSET
|
||||
teletype_remote = BASE + $400 + OFFSET
|
||||
jsr reset_serial
|
||||
lda #$FF
|
||||
sta serial_write
|
||||
@ -52,11 +52,11 @@ teletype_remote_wait
|
||||
end_of_teletype_remote
|
||||
|
||||
; 0-255 repeating counter over TXD
|
||||
* = $C500
|
||||
* = BASE + $500 + OFFSET
|
||||
.dsb (*-end_of_teletype_remote), 0
|
||||
|
||||
* = $C500
|
||||
counter_remote = $C500
|
||||
* = BASE + $500 + OFFSET
|
||||
counter_remote = BASE + $500 + OFFSET
|
||||
jsr reset_serial
|
||||
ldy #$00
|
||||
sta serial_write
|
||||
|
||||
Loading…
Reference in New Issue
Block a user