mirror of
https://github.com/alangarf/apple-one.git
synced 2024-06-09 22:29:41 +00:00
boards: icoboard support
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
This commit is contained in:
parent
6df00e7161
commit
dce06d560e
|
@ -7,6 +7,7 @@ This is a basic implementation of the original Apple 1 in Verilog. It can run th
|
|||
|
||||
Contributor supported boards (YMMV):
|
||||
- [Blackice II](https://www.tindie.com/products/Folknology/blackice-ii/)
|
||||
- [icoBoard](http://icoboard.org/)
|
||||
- [Olimex iCE40HX8K with ICE40-IO](https://www.olimex.com/Products/FPGA/iCE40/iCE40HX8K-EVB/open-source-hardware)
|
||||
- [TinyFPGA B2](http://tinyfpga.com/)
|
||||
- [Upduino](http://gnarlygrey.atspace.cc/development-platform.html)
|
||||
|
|
28
boards/icoboard/README.md
Normal file
28
boards/icoboard/README.md
Normal file
|
@ -0,0 +1,28 @@
|
|||
# icoBoard with Digilent Pmods support
|
||||
|
||||
This adds support for building the apple one design for
|
||||
[icoBoard](http://icoboard.org/about-icoboard.html) with attached Digilent Pmods
|
||||
for VGA, PS/2 or UART.
|
||||
|
||||
## Peripheral support
|
||||
|
||||
VGA port is working through a Digilent VGA Pmod on Pmod 1/2.
|
||||
|
||||
PS/2 works through a Digilent PS/2 Pmod on Pmod 3 upper row.
|
||||
|
||||
UART works through a Digilent USBUART Pmod on Pmod 4 upper row.
|
||||
|
||||
By default, UART is enabled (and PS/2 is off), check
|
||||
rtl/boards/icoboard/apple1_hx8k.v.
|
||||
|
||||
## Building
|
||||
Install a recent IceStorm toolchain, and:
|
||||
|
||||
```
|
||||
$ cd yosys
|
||||
$ make apple1
|
||||
```
|
||||
|
||||
## Use
|
||||
|
||||
To load BASIC type "E000R" with CAPS LOCK on.
|
79
boards/icoboard/yosys/Makefile
Normal file
79
boards/icoboard/yosys/Makefile
Normal file
|
@ -0,0 +1,79 @@
|
|||
DEVICE = hx8k
|
||||
PIN_DEF = icoboard.pcf
|
||||
FREQ_OSC = 100
|
||||
FREQ_PLL = 25
|
||||
|
||||
SOURCEDIR = ../../../rtl
|
||||
BUILDDIR = build
|
||||
|
||||
PLL = $(BUILDDIR)/pll.sv
|
||||
|
||||
all: apple1 prog
|
||||
|
||||
info:
|
||||
@echo " To build: make apple1"
|
||||
@echo " To program: make prog"
|
||||
@echo "To build report: make report"
|
||||
@echo " To clean up: make clean"
|
||||
|
||||
dir:
|
||||
mkdir -p $(BUILDDIR)
|
||||
|
||||
# ------ TEMPLATES ------
|
||||
$(BUILDDIR)/%.blif: $(SOURCEDIR)/%.v
|
||||
yosys -q -p "chparam -list; hierarchy -top apple1_top; synth_ice40 -blif $@" $^
|
||||
|
||||
$(BUILDDIR)/%.asc: $(PIN_DEF) $(BUILDDIR)/%.blif
|
||||
arachne-pnr -d 8k -o $@ -p $^
|
||||
|
||||
$(BUILDDIR)/%.bin: $(BUILDDIR)/%.asc
|
||||
icepack $^ $@
|
||||
|
||||
%.rpt: $(BUILDDIR)/%.asc
|
||||
icetime -d $(DEVICE) -c $(FREQ_PLL) -mtr $@ $<
|
||||
|
||||
%_tb.vvp: %_tb.v %.v
|
||||
iverilog -o $@ $^
|
||||
|
||||
%_tb.vcd: %_tb.vvp
|
||||
vvp -N $< +vcd=$@
|
||||
|
||||
$(PLL):
|
||||
icepll $(QUIET) -i $(FREQ_OSC) -o $(FREQ_PLL) -m -f $@
|
||||
|
||||
# ------ APPLE 1 ------
|
||||
apple1: dir $(PLL) $(BUILDDIR)/apple1.bin
|
||||
report: dir apple1.rpt
|
||||
|
||||
$(BUILDDIR)/apple1.bin: $(BUILDDIR)/apple1.asc
|
||||
$(BUILDDIR)/apple1.asc: $(BUILDDIR)/apple1.blif
|
||||
$(BUILDDIR)/apple1.blif: $(SOURCEDIR)/apple1.v \
|
||||
$(SOURCEDIR)/clock.v \
|
||||
$(SOURCEDIR)/pwr_reset.v \
|
||||
$(SOURCEDIR)/ram.v \
|
||||
$(SOURCEDIR)/rom_wozmon.v \
|
||||
$(SOURCEDIR)/rom_basic.v \
|
||||
$(SOURCEDIR)/cpu/arlet_6502.v \
|
||||
$(SOURCEDIR)/cpu/arlet/ALU.v \
|
||||
$(SOURCEDIR)/cpu/arlet/cpu.v \
|
||||
$(SOURCEDIR)/uart/uart.v \
|
||||
$(SOURCEDIR)/uart/async_tx_rx.v \
|
||||
$(SOURCEDIR)/vga/vga.v \
|
||||
$(SOURCEDIR)/vga/vram.v \
|
||||
$(SOURCEDIR)/vga/font_rom.v \
|
||||
$(SOURCEDIR)/ps2keyboard/debounce.v \
|
||||
$(SOURCEDIR)/ps2keyboard/ps2keyboard.v \
|
||||
$(SOURCEDIR)/boards/icoboard/apple1_hx8k.v \
|
||||
$(BUILDDIR)/pll.sv
|
||||
|
||||
apple1.rpt: $(BUILDDIR)/apple1.asc
|
||||
|
||||
prog: dir $(BUILDDIR)/apple1.bin
|
||||
icoprog -p < $(BUILDDIR)/apple1.bin
|
||||
|
||||
# ------ HELPERS ------
|
||||
clean:
|
||||
rm -rf build apple1.rpt
|
||||
|
||||
.SECONDARY:
|
||||
.PHONY: all info clean prog iceprog
|
42
boards/icoboard/yosys/icoboard.pcf
Normal file
42
boards/icoboard/yosys/icoboard.pcf
Normal file
|
@ -0,0 +1,42 @@
|
|||
# For the icoBoard
|
||||
|
||||
### 100Mhz clk
|
||||
set_io clk R9
|
||||
|
||||
### VGA display
|
||||
set_io vga_h_sync B8
|
||||
set_io vga_v_sync A9
|
||||
set_io vga_r[0] A5
|
||||
set_io vga_r[1] A2
|
||||
set_io vga_r[2] C3
|
||||
set_io vga_r[3] B4
|
||||
set_io vga_g[0] D8
|
||||
set_io vga_g[1] B9
|
||||
set_io vga_g[2] B10
|
||||
set_io vga_g[3] B11
|
||||
set_io vga_b[0] B7
|
||||
set_io vga_b[1] B6
|
||||
set_io vga_b[2] B3
|
||||
set_io vga_b[3] B5
|
||||
|
||||
### LEDs
|
||||
# onboard LEDs
|
||||
set_io led[0] C8
|
||||
set_io led[1] F7
|
||||
|
||||
### PS/2
|
||||
set_io ps2_din L9
|
||||
set_io ps2_clk L7
|
||||
|
||||
### Buttons
|
||||
# onboard buttons
|
||||
set_io button[0] K11
|
||||
set_io button[1] P13
|
||||
|
||||
### UART
|
||||
#set_io uart_rts T15
|
||||
#set_io uart_rx T14
|
||||
#set_io uart_tx T11
|
||||
set_io uart_rx T11
|
||||
set_io uart_tx T14
|
||||
set_io uart_cts R10
|
105
rtl/boards/icoboard/apple1_hx8k.v
Normal file
105
rtl/boards/icoboard/apple1_hx8k.v
Normal file
|
@ -0,0 +1,105 @@
|
|||
// Licensed to the Apache Software Foundation (ASF) under one
|
||||
// or more contributor license agreements. See the NOTICE file
|
||||
// distributed with this work for additional information
|
||||
// regarding copyright ownership. The ASF licenses this file
|
||||
// to you under the Apache License, Version 2.0 (the
|
||||
// "License"); you may not use this file except in compliance
|
||||
// with the License. You may obtain a copy of the License at
|
||||
//
|
||||
// http://www.apache.org/licenses/LICENSE-2.0
|
||||
//
|
||||
// Unless required by applicable law or agreed to in writing,
|
||||
// software distributed under the License is distributed on an
|
||||
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||
// KIND, either express or implied. See the License for the
|
||||
// specific language governing permissions and limitations
|
||||
// under the License.
|
||||
//
|
||||
// Description: Apple 1 implementation for the icoBoard
|
||||
//
|
||||
// Author.....: Paolo Pisati (inspired from blackice2/apple1_hx8k.v)
|
||||
// Date.......: 05-11-2019
|
||||
//
|
||||
|
||||
module apple1_top #(
|
||||
parameter BASIC_FILENAME = "../../../roms/basic.hex",
|
||||
parameter FONT_ROM_FILENAME = "../../../roms/vga_font_bitreversed.hex",
|
||||
parameter RAM_FILENAME = "../../../roms/ram.hex",
|
||||
parameter VRAM_FILENAME = "../../../roms/vga_vram.bin",
|
||||
parameter WOZMON_ROM_FILENAME = "../../../roms/wozmon.hex"
|
||||
) (
|
||||
input clk, // 100 MHz board clock
|
||||
|
||||
// I/O interface to computer
|
||||
input uart_rx, // asynchronous serial data input from computer
|
||||
output uart_tx, // asynchronous serial data output to computer
|
||||
output uart_cts, // clear to send flag to computer - not used
|
||||
|
||||
// I/O interface to keyboard
|
||||
input ps2_clk, // PS/2 keyboard serial clock input
|
||||
input ps2_din, // PS/2 keyboard serial data input
|
||||
|
||||
// Outputs to VGA display
|
||||
output vga_h_sync, // hozizontal VGA sync pulse
|
||||
output vga_v_sync, // vertical VGA sync pulse
|
||||
|
||||
output [3:0] vga_r, // red VGA signal
|
||||
output [3:0] vga_g, // green VGA signal
|
||||
output [3:0] vga_b, // blue VGA signal
|
||||
|
||||
// Debugging ports
|
||||
output [1:0] led,
|
||||
input [1:0] button // 2 buttons on board
|
||||
);
|
||||
|
||||
assign led[0] = reset_n;
|
||||
assign led[1] = clr_screen_n;
|
||||
|
||||
wire clk25;
|
||||
// 100MHz down to 25MHz
|
||||
pll my_pll(
|
||||
.clock_in(clk),
|
||||
.clock_out(clk25)
|
||||
);
|
||||
|
||||
wire vga_bit;
|
||||
|
||||
// set the monochrome base colour here..
|
||||
assign vga_r[3:0] = vga_bit ? 4'b1000 : 4'b0000;
|
||||
assign vga_g[3:0] = vga_bit ? 4'b1111 : 4'b0000;
|
||||
assign vga_b[3:0] = vga_bit ? 4'b1000 : 4'b0000;
|
||||
|
||||
wire reset_n;
|
||||
assign reset_n = ~button[0];
|
||||
|
||||
wire clr_screen_n;
|
||||
assign clr_screen_n = ~button[1];
|
||||
|
||||
// apple one main system
|
||||
apple1 #(
|
||||
.BASIC_FILENAME (BASIC_FILENAME),
|
||||
.FONT_ROM_FILENAME (FONT_ROM_FILENAME),
|
||||
.RAM_FILENAME (RAM_FILENAME),
|
||||
.VRAM_FILENAME (VRAM_FILENAME),
|
||||
.WOZMON_ROM_FILENAME (WOZMON_ROM_FILENAME)
|
||||
) my_apple1(
|
||||
.clk25(clk25),
|
||||
.rst_n(reset_n),
|
||||
|
||||
.uart_rx(uart_rx),
|
||||
.uart_tx(uart_tx),
|
||||
.uart_cts(uart_cts),
|
||||
|
||||
.ps2_clk(ps2_clk),
|
||||
.ps2_din(ps2_din),
|
||||
//.ps2_select(1'b1), // PS/2 not working, at the moment
|
||||
.ps2_select(1'b0), // PS/2 disabled, UART TX enabled
|
||||
|
||||
.vga_h_sync(vga_h_sync),
|
||||
.vga_v_sync(vga_v_sync),
|
||||
.vga_red(vga_bit),
|
||||
//.vga_grn(vga_bit),
|
||||
//.vga_blu(vga_bit),
|
||||
.vga_cls(~clr_screen_n),
|
||||
);
|
||||
endmodule
|
Loading…
Reference in New Issue
Block a user