verilog-apple-one/rtl/vga/font_rom.v
Olof Kindgren 2226afe669 Expose ROM/RAM files as top-level parameters
This allows file names to be overridden at compile-time.

It also gets rid of the ifdef SIM in the verilog components
2018-02-12 14:04:00 +01:00

76 lines
2.2 KiB
Verilog

// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements. See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership. The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License. You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied. See the License for the
// specific language governing permissions and limitations
// under the License.
//
// Description: 8KB RAM for system
//
// Author.....: Alan Garfield
// Date.......: 3-2-2018
//
//`define DOTTY
//`define SCANLINES
`define NORMAL
module font_rom(
input clk, // clock signal
input [1:0] mode, // character mode
input [5:0] character, // address bus
input [3:0] pixel, // address of the pixel to output
input [4:0] line, // address of the line to output
output reg out // single pixel from address and pixel pos
);
parameter ROM_FILENAME = "";
reg [7:0] rom[0:1023];
initial
$readmemh(ROM_FILENAME, rom, 0, 1023);
// double height of pixel by ignoring bit 0
wire [3:0] line_ptr = line[4:1];
// Note: Quartus II reverses the pixels when we do:
//
// rom[address][bitindex]
//
// directly, so we use an intermediate
// signal, romout, to work around this
// problem.
//
// IceCube2 and Yosys don't seem to have this problem.
//
reg [7:0] romout;
always @(posedge clk)
begin
// mode
// 00 - normal
// 01 - vertical scanlines
// 10 - horizontal scanlines
// 11 - dotty mode
romout = rom[(character * 10) + {2'd0, line_ptr}];
out <= (mode[1] & line[0]) ? 1'b0 :
(mode[0] & pixel[0]) ? 1'b0 :
romout[pixel[3:1]];
end
endmodule