Replaced source with source that is actually just transcribed from the original Apple 1 manual

git-svn-id: svn+ssh://svn.phoenixbox.net/svn/apple1/trunk@48 64f78de7-aa59-e511-a0e8-0002a5492df0
This commit is contained in:
Daniel Loffgren 2015-09-21 04:46:58 +00:00
parent 1ecbc0e47e
commit de7debbf8e

View File

@ -1,259 +1,158 @@
;-------------------------------------------------------------------------
;
; The WOZ Monitor for the Apple 1
; Written by Steve Wozniak 1976
;
;-------------------------------------------------------------------------
; Wozniak Apple1 Monitor
; .CR 6502
; .OR $FF00
; .TF WOZMON.HEX,HEX,8
.org $FF00 ; Rom Start
;-------------------------------------------------------------------------
; Memory declaration
;-------------------------------------------------------------------------
;******* Hardware Variables ************
XAML = $24 ; Last "opened" location Low
XAMH = $25 ; Last "opened" location High
STL = $26 ; Store address Low
STH = $27 ; Store address High
L = $28 ; Hex value parsing Low
H = $29 ; Hex value parsing High
YSAV = $2A ; Used to see if hex value is given
MODE = $2B ; $00=XAM, $7F=STOR, $AE=BLOCK XAM
DSP = $D012 ; Video I/O
DSPCR = $D013
IN = $0200,$027F ; Input buffer
KBD = $D010 ; Keyboard I/O
KBDCR = $D011
KBD = $D010 ; PIA.A keyboard input
KBDCR = $D011 ; PIA.A keyboard control register
DSP = $D012 ; PIA.B display output register
DSPCR = $D013 ; PIA.B display control register
;********* Zero Page Variables *********
; KBD b7..b0 are inputs, b6..b0 is ASCII input, b7 is constant high
; Programmed to respond to low to high KBD strobe
; DSP b6..b0 are outputs, b7 is input
; CB2 goes low when data is written, returns high when CB1 goes high
; Interrupts are enabled, though not used. KBD can be jumpered to IRQ,
; whereas DSP can be jumpered to NMI.
XAML = $24
XAMH = $25
STL = $26
STH = $27
L = $28
H = $29
YSAV = $2A
MODE = $2B
;-------------------------------------------------------------------------
; Constants
;-------------------------------------------------------------------------
;******** $200-$27F Text Buffer *********
BS = $DF ; Backspace key, arrow left key
CR = $8D ; Carriage Return
ESC = $9B ; ESC key
PROMPT = $DC ; Prompt character
IN = $0200
;-------------------------------------------------------------------------
; Let's get started
;
; Remark the RESET routine is only to be entered by asserting the RESET
; line of the system. This ensures that the data direction registers
; are selected.
;-------------------------------------------------------------------------
;******** Listing *************
RESET: CLD ; Clear decimal arithmetic mode
RESET: CLD ; Clear decimal arithmetic mode.
CLI
LDY #%0111.1111 ; Mask for DSP data direction reg
STY DSP ; (DDR mode is assumed after reset)
LDA #%1010.0111 ; KBD and DSP control register mask
STA KBDCR ; Enable interrupts, set CA1, CB1 for
STA DSPCR ; positive edge sense/output mode.
LDY #$7F ; Mask for DSP data direction register
STY DSP ; Set it up.
LDA #$A7 ; KBD and DSP control register mask.
STA KBDCR ; Enable interrupts, set CA1, CB1, for
STY DSPCR ; postitive edge sense/output mode.
NOTCR: CMP #$DF ; "<-"?
BEQ BACKSAPCE ; Yes.
CMP #$9B ; ESC?
BEQ ESCAPE ; Yes.
INY ; Advance text index.
BPL NEXTCHAR ; Auto ESC if > 127.
ESCAPE: LDA #$DC ; "\".
JSR ECHO ; Output it.
GETLINE: LDA #$8D ; CR.
JSR ECHO ; Output it.
LDY #$01 ; Initiallize text index.
BACKSPACE: DEY ; Backup text index.
BMI GETLINE ; Beyond start of line, reinitialize
NEXTCHAR: LDA KBDCR ; Key ready?
BPL NEXTCHAR ; Loop until ready.
LDA KBD ; Load character. B7 shoul be '1'
STA IN,Y ; Add to text buffer.
JSR ECHO ; Display character.
CMP #$8D ; CR?
BNE NOTCR ; No.
LDY #$FF ; Reset text index.
LDA #$00 ; For XAM mode.
TAX ; 0->X.
SETSTOR: ASL A ; Leaves $7B if setting STOR mode.
SETMODE: STA MODE ; $00 = XAM, $7B = STOR, $A3 = BLOK XAM
BLSKIP: INY ; Advance text index.
NEXTITEM: LDA IN,Y ; Get character.
CMP #$8D ; CR?
BEQ GETLINE ; Yes, done this line.
CMP #$A3 ; "."?
BCC BLSKIP ; Skip delimiter.
BEQ SETMODE ; Set BLOCK XAM mode.
CMP #$BA ; ":"?
BEQ SETSTOR ; Yes, set STOR mode.
CMP #$D2 ; "R"?
BEQ RUN ; Yes, run user program.
STX L ; $00->L.
STX H ; and H.
STY YSAV ; Save Y for comparison.
NEXTHEX: LDA IN,Y ; Get character for hex test.
EOR #$B0 ; Map digits to $0-9.
CMP #$0A ; Digit?
BCC DIG ; Yes.
ADC #$88 ; Map letter "A"-"F" to $FA-FF.
CMP #$FA ; Hex letter?
BCC NOHEX ; No, character not hex.
DIG: ASL A
ASL A ; Hex digit to MSD of A.
ASL A ;
ASL A ;
LDX #$04 ; Shift count.
HEXSHIFT: ASL A ; Hex digit left, MSDB to carry.
ROL L ; Rotate into LSD.
ROL H ; Rotate into MSD's.
DEX ; Done 4 shifts?
BNE HEXSHIFT ; No, loop.
INY ; Advance text index.
BNE NEXTHEX ; Always taken. Check next character for hex.
NOTHEX: CPY YSAV ; Check if L, H empty (no hex digits)
BEQ ESCAPE ; Yes, generate ESC sequence.
BIT MODE ; Test MODE byte.
BVC NOTSTOR ; B6 = 0 for STOR, 1 for XAM and BLOCK XAM
LDA L ; LSD's of hex data.
STA (STL,X) ; Store at current 'store index'.
INC STL ; Increment store index.
BNE NEXTITEM ; Get next item. (no carry).
INC STH ; Add carry to 'store index' high order.
TONEXTITEM: JMP NEXTITEM ; Get next command item.
RUN: JMP (XAML) ; Run at current XAM index.
NOTSTOR: BMI XAMNEXT ; B7 = 0 for XAM, 1 for BLOCK XAM.
LDX #$02 ; Byte count.
SETADR: LDA L-1,X ; Copy hex data to
STA STL-1,X ; 'store index'.
STA XAML-1,X ; And to 'XAM index'.
DEX ; Next of 2 bytes.
BNE SETADR ; Loop unless X = 0.
NXTPRNT: BNE PRDATA ; NE means no address to print.
LDA #$8D ; CR.
JSR ECHO ; Output it.
LDA XAMH ; 'Examine index' high-order byte.
JSR PRBYTE ; Output it in hex format.
LDA XAML ; Low-order 'examine index' byte.
JSR PRBYTE ; Output it in hex format.
LDA #$BA ; ":".
JSR ECHO ; Output it.
PRDATA: LDA #$A0 ; Blank.
JSR ECHO ; Output it.
LDA (XAML,X) ; Get data byte at 'examine index'
JSR PRBYTE ; Output it in hex format.
XAMNEXT: STX MODE ; 0->MODE (XAM mode).
LDA XAML
CMP L ; Comapre 'examine index' to hex data.
LDA XAMH ;
SBC H
BCS TONEXTITEM ; Not less, so no more data to output.
INC XAML ;
BNE MOD8CHK ; Increment 'examine index'.
INC XAMH ;
MOD8CHK: LDA XAML ; Check low-order 'examine index' byte
AND #$07 ; For MOD 8=0
BPL NXTPRNT ; Always taken.
PRBYTE: PHA ; Save A for LSD.
LSR A
LSR A
LSR A ; MSD to LSD position.
LSR A
JSR PRHEX ; Output hex digit.
PLA ; Restore A.
PRHEX: AND #$0F ; Make LSD for hex print.
ORA #$B0 ; Add "0".
CMP #$BA ; Digit?
BCC ECHO ; Yes, output it.
ADC #$06 ; Add offset for letter.
ECHO: BIT DSP ; DA bit (B7) cleared yet?
BMI ECHO ; No, wait for display
STA DSP ; Output character. Sets DA.
RTS ; Return.
; Program falls through to the GETLINE routine to save some program bytes
; Please note that Y still holds $7F, which will cause an automatic Escape
;-------------------------------------------------------------------------
; The GETLINE process
;-------------------------------------------------------------------------
NOTCR: CMP #BS ; Backspace key?
BEQ BACKSPACE ; Yes
CMP #ESC ; ESC?
BEQ ESCAPE ; Yes
INY ; Advance text index
BPL NEXTCHAR ; Auto ESC if line longer than 127
ESCAPE: LDA #PROMPT ; Print prompt character
JSR ECHO ; Output it.
GETLINE: LDA #CR ; Send CR
JSR ECHO
LDY #0+1 ; Start a new input line
BACKSPACE: DEY ; Backup text index
BMI GETLINE ; Oops, line's empty, reinitialize
NEXTCHAR: LDA KBDCR ; Wait for key press
BPL NEXTCHAR ; No key yet!
LDA KBD ; Load character. B7 should be '1'
STA IN,Y ; Add to text buffer
JSR ECHO ; Display character
CMP #CR
BNE NOTCR ; It's not CR!
; Line received, now let's parse it
LDY #-1 ; Reset text index
LDA #0 ; Default mode is XAM
TAX ; X=0
SETSTOR: ASL A ; Leaves $7B if setting STOR mode
SETMODE: STA MODE ; Set mode flags
BLSKIP: INY ; Advance text index
NEXTITEM: LDA IN,Y ; Get character
CMP #CR
BEQ GETLINE ; We're done if it's CR!
CMP #"."
BCC BLSKIP ; Ignore everything below "."!
BEQ SETMODE ; Set BLOCK XAM mode ("." = $AE)
CMP #":"
BEQ SETSTOR ; Set STOR mode! $BA will become $7B
CMP #"R"
BEQ RUN ; Run the program! Forget the rest
STX L ; Clear input value (X=0)
STX H
STY YSAV ; Save Y for comparison
; Here we're trying to parse a new hex value
NEXTHEX: LDA IN,Y ; Get character for hex test
EOR #$B0 ; Map digits to 0-9
CMP #9+1 ; Is it a decimal digit?
BCC DIG ; Yes!
ADC #$88 ; Map letter "A"-"F" to $FA-FF
CMP #$FA ; Hex letter?
BCC NOTHEX ; No! Character not hex
DIG: ASL A
ASL A ; Hex digit to MSD of A
ASL A
ASL A
LDX #4 ; Shift count
HEXSHIFT: ASL A ; Hex digit left, MSB to carry
ROL L ; Rotate into LSD
ROL H ; Rotate into MSD's
DEX ; Done 4 shifts?
BNE HEXSHIFT ; No, loop
INY ; Advance text index
BNE NEXTHEX ; Always taken
NOTHEX: CPY YSAV ; Was at least 1 hex digit given?
BEQ ESCAPE ; No! Ignore all, start from scratch
BIT MODE ; Test MODE byte
BVC NOTSTOR ; B6=0 is STOR, 1 is XAM or BLOCK XAM
; STOR mode, save LSD of new hex byte
LDA L ; LSD's of hex data
STA (STL,X) ; Store current 'store index'(X=0)
INC STL ; Increment store index.
BNE NEXTITEM ; No carry!
INC STH ; Add carry to 'store index' high
TONEXTITEM: JMP NEXTITEM ; Get next command item.
;-------------------------------------------------------------------------
; RUN user's program from last opened location
;-------------------------------------------------------------------------
RUN: JMP (XAML) ; Run user's program
;-------------------------------------------------------------------------
; We're not in Store mode
;-------------------------------------------------------------------------
NOTSTOR: BMI XAMNEXT ; B7 = 0 for XAM, 1 for BLOCK XAM
; We're in XAM mode now
LDX #2 ; Copy 2 bytes
SETADR: LDA L-1,X ; Copy hex data to
STA STL-1,X ; 'store index'
STA XAML-1,X ; and to 'XAM index'
DEX ; Next of 2 bytes
BNE SETADR ; Loop unless X = 0
; Print address and data from this address, fall through next BNE.
NXTPRNT: BNE PRDATA ; NE means no address to print
LDA #CR ; Print CR first
JSR ECHO
LDA XAMH ; Output high-order byte of address
JSR PRBYTE
LDA XAML ; Output low-order byte of address
JSR PRBYTE
LDA #":" ; Print colon
JSR ECHO
PRDATA: LDA #" " ; Print space
JSR ECHO
LDA (XAML,X) ; Get data from address (X=0)
JSR PRBYTE ; Output it in hex format
XAMNEXT: STX MODE ; 0 -> MODE (XAM mode).
LDA XAML ; See if there's more to print
CMP L
LDA XAMH
SBC H
BCS TONEXTITEM ; Not less! No more data to output
INC XAML ; Increment 'examine index'
BNE MOD8CHK ; No carry!
INC XAMH
MOD8CHK: LDA XAML ; If address MOD 8 = 0 start new line
AND #%0000.0111
BPL NXTPRNT ; Always taken.
;-------------------------------------------------------------------------
; Subroutine to print a byte in A in hex form (destructive)
;-------------------------------------------------------------------------
PRBYTE: PHA ; Save A for LSD
LSR A
LSR A
LSR A ; MSD to LSD position
LSR A
JSR PRHEX ; Output hex digit
PLA ; Restore A
; Fall through to print hex routine
;-------------------------------------------------------------------------
; Subroutine to print a hexadecimal digit
;-------------------------------------------------------------------------
PRHEX: AND #%0000.1111 ; Mask LSD for hex print
ORA #"0" ; Add "0"
CMP #"9"+1 ; Is it a decimal digit?
BCC ECHO ; Yes! output it
ADC #6 ; Add offset for letter A-F
; Fall through to print routine
;-------------------------------------------------------------------------
; Subroutine to print a character to the terminal
;-------------------------------------------------------------------------
ECHO: BIT DSP ; DA bit (B7) cleared yet?
BMI ECHO ; No! Wait for display ready
STA DSP ; Output character. Sets DA
RTS
;-------------------------------------------------------------------------
; Vector area
;-------------------------------------------------------------------------
.DA $0000 ; Unused, what a pity
NMI_VEC .DA $0F00 ; NMI vector
RESET_VEC .DA RESET ; RESET vector
IRQ_VEC .DA $0000 ; IRQ vector
;-------------------------------------------------------------------------
.LI OFF
.byte $0000
.byte $F000 NMI
.byte $FF00 RESET
.byte $0000 IRQ