Retro Code (Apple II, Cosmac VIP) to Tape/Text
Go to file
2016-01-01 12:35:20 -07:00
article c2t-96h minor updates, doc updates, article added/updated, windows 96h binary 2015-12-31 12:19:07 -07:00
asm minor updates 2015-12-31 18:59:49 -07:00
mon readme updates, c2t for OS/X added, reorg of dir 2014-11-24 06:19:57 -07:00
research c2t-96h minor updates, doc updates, article added/updated, windows 96h binary 2015-12-31 12:19:07 -07:00
windows c2t-96h minor updates, doc updates, article added/updated, windows 96h binary 2015-12-31 12:19:07 -07:00
c2t minor updates 2015-12-31 18:59:49 -07:00
c2t-96h minor updates 2015-12-31 18:59:49 -07:00
c2t-96h.c c2t-96h minor updates, doc updates, article added/updated, windows 96h binary 2015-12-31 12:19:07 -07:00
c2t.c lots of testing, source comments and doc updates 2014-11-29 11:54:56 -07:00
c2t.h minor updates 2015-12-31 18:59:49 -07:00
c2t.h.0 init commit 2014-11-23 17:26:22 -07:00
c2vip.c added c2vip for Cosmac VIP 2014-11-23 18:32:12 -07:00
c2vip.h added c2vip for Cosmac VIP 2014-11-23 18:32:12 -07:00
fake6502.h init commit 2014-11-23 17:26:22 -07:00
Makefile c2t-96h minor updates, doc updates, article added/updated, windows 96h binary 2015-12-31 12:19:07 -07:00
makeheader readme updates, c2t for OS/X added, reorg of dir 2014-11-24 06:19:57 -07:00
miniz.h init commit 2014-11-23 17:26:22 -07:00
README.md minor updates 2016-01-01 12:35:20 -07:00

Use c2t-96h version, see below

Introduction

c2t is a command line tool that can convert binary code/data and/or Apple-1/II Monitor text, as well as 140K disk images, into audio files suitable for use with the Apple-1 and II (II, II+, //e) cassette interface.

c2t offers three high-speed options for the 64K Apple II+ and Apple //e: 8000 bps, 8820 bps, and 9600 bps. The c2t compression option may be used to speedup the delivery of data with all three as well as the native 1333 bps cassette interface ROM routines.

8820 bps (used to burn CDs) and 9600 bps are not compatible with all II+s and //es. If you plan to distribute your audio files, then use 8000 bps. 8820 bps and 1333 bps is not an option for disk images.

High-speed and compression options require c2t's custom loader, and at this time that limits you to a single segment. You can overcome this limitation by concatenating all your code together and creating your own code to shuffle your data around, or, pad each segment with enough zeros to align subsequent segments with their target address and then use the compress option to minimize this overhead.

Multi-segment audio files can be created for the Apple-1, II, II+, and //e that can be loaded using the standard cassette interface ROM routines.

Examples of c2t in action:

Why?

I created this because I needed a convenient way to get data loaded into my //e without dragging my computer out of my office (2nd floor) to my man cave (basement). IOW, I needed an iPhone/iPad/mobile solution. That, and CFFA3000 was sold out--at the time.

Yeah, but why?

You clearly do not understand the awesomeness of the Apple II, move along.

Version

  • c2t 0.996 (Nov 29 2014)
  • c2t-96h 0.997 (Dec 31 2015)

Installation

git clone https://github.com/datajerk/c2t.git

or

Download https://github.com/datajerk/c2t/archive/master.zip and extract.

Both the archive and the repo contain an OS/X 64-bit binary (c2t) as well as a Windows binary (windows/c2t.exe). Just copy to the to any directory in your path. OS/X users may need to adjust the permissions, e.g.:

cp c2t /usr/local/bin
chmod 755 /usr/local/bin/c2t

To build from the source (OS/X and Linux):

make clean
make

To build for/from Windows, first install MinGW (http://www.mingw.org/), then type from the root of this distribution:

PATH=C:\MinGW\bin;%PATH%
cd windows
copy ..\c2t.*
copy ..\fake6502.h
gcc -Wall -O3 -static -o c2t c2t.c

Use the miniz.h in the windows directory.

To cross build for Windows from OS/X, first install http://crossgcc.rts-software.org/doku.php?id=compiling_for_win32, then type:

cd windows
cp ../c2t.*
cp ../fake6502.h
/usr/local/gcc-4.8.0-qt-4.8.4-for-mingw32/win32-gcc/bin/i586-mingw32-gcc -Wall -Wno-unused-value -Wno-unused-function -O3 -static -o c2t.exe c2t.c

c2t-96h Version

c2t-96h is a hacked up version of c2t that fixes a few bugs (e.g. .po files) and adds better universal (should work on all Apple IIs) 9600 BPS code. Both -8 and -f activate this new 9600 BPS code.

c2t-96h will eventually replace c2t. IOW, use c2t-96h for now.

Tested Configurations:

  • Apple //e
    • Apple disk ][ verified (format and no-format)
    • Apple duodisk verified (format and no-format)
    • CFFA3000 3.1 verified with USB stick (no-format only)
    • CFFA3000 3.1 failed with IBM 4GB Microdrive (too slow)
    • Nishida Radio SDISK // verified (no-format only)
  • Apple II+
    • Apple disk ][ verified (format and no-format)
    • Nishida Radio SDISK // verified (no-format only)
  • Virtual ][ Emulator
    • Apple disk ][ verified (format and no-format)

Synopsis

Output of c2t -h:

usage:  c2t      [-vh?]
        c2t      [-elp]         input[.mon],[addr] ... [output.mon]
        c2t {-1} [-cepr]        input[.mon],[addr] ... [output.[aif[f]|wav[e]]]
        c2t {-2} [-abcdef8pmqr] input[.mon],[addr] ... [output.[aif[f]|wav[e]]]
        c2t      [-n8]          input.dsk          ... [output.[aif[f]|wav[e]]]

        -1 or -2 for Apple I or II tape format
        -8 use 48k/8bit 8000 bps transfer (Apple II/II+/IIe 64K only)
           Implies -2a.  Negates -f and -d.
        -a assembly autoload and run (Apple II/II+/IIe 64K only)
        -b basic autoload and run (Apple II+/IIe 64K only)
           Implies -2a.
        -c compress data
        -d use fast 44.1k/16bit transfer (Apple II/II+/IIe 64K only)
           Implies -2a.  Negates -f and -8.  Use for burning CDs.
        -e pad with $00 to end on page boundary
        -f use faster 48k/8bit (9600 bps) transfer (Apple II/II+/IIe 64K only)
           Implies -2a.  Negates -8 and -d.  Unreliable on some systems.
        -h|? this help
        -l long monitor format (24 bytes/line)
        -m jump to monitor after autoload
        -n do not format disks
        -p pipe to stdout
        -q parameters and data only (for use with custom client)
        -r #, where # overrides the sample rate (e.g. -r 48000)
        -t 10 second preamble (default 4) for real tape use
        -v print version number and exit

input(s) without a .mon or .dsk extension is assumed to be a binary with a 4
byte header.  If the header is missing then you must append ,load_address to
each binary input missing a header, e.g. filename,800.  The load address
will be read as hex.

input(s) with a .mon extension expected input format:

        0280: A2 FF 9A 20 8C 02 20 4F
        0288: 03 4C 00 FF 20 9E 02 A9

A single input with a .dsk extension expected to be a 140K disk image.

output must have aiff, aif, wav, wave, or mon extention.

Examples


Input:  Apple 1 monitor file with two segments.  First 4 lines:

0: 00 05 00 10 00 00 00 00
8: 00 00 00 00 00 00 00 00
280: A9 00 85 07 A9 00 A8 AA
288: 85 06 A5 00 85 04 A5 01

Command:

c2t -1 a1mt.mon a1mt.aif

Output:

Reading a1mt.mon, type monitor, segment 1, start: 0x0000, length: 16
Reading a1mt.mon, type monitor, segment 2, start: 0x0280, length: 290

Writing a1mt.aif as Apple I formatted aiff.

To load up and run on your Apple I, type:

        C100R
        0.FR 280.3A1R 

Input:  cc65/ca65 Apple II binary with DOS 4-byte header.  The DOS header
        contains the starting address of the program.

Command:

c2t -2 hello hello.wav

Output:

Reading hello, type binary, segment 1, start: 0x0803, length: 2958

Writing hello.wav as Apple II formatted wave.

To load up and run on your Apple II, type:

        CALL -151
        803.1390R 
        803G

Input:  cc65/ca65 Apple II binary with DOS 4-byte header.  The DOS header
        contains the starting address of the program.

Command:

c2t hello hello.mon

Output:

Reading hello, type binary, segment 1, start: 0x0803, length: 2958

Writing hello.mon as Apple formatted monitor.

Example hello.mon output:

0803: A2 FF 9A 2C 81
0808: C0 2C 81 C0 A9 91 A0 13
0810: 85 9B 84 9C A9 91 A0 13
0818: 85 96 84 97 A9 00 A0 D4

Input:  Binary game without DOS header that should be loaded at $801.

Command:

c2t -2 moon.patrol,801 moon.patrol.aif

Output:

Reading moon.patrol, type binary, segment 1, start: 0x0801, length: 18460

Writing moon.patrol.aif as Apple II formatted aiff.

To load up and run on your Apple II, type:

        CALL -151
        801.501CR 
        801G

Input:  Binary game without DOS header that should be loaded at $801 as fast
        as possible while being compatible with all Apple IIs.

Command:

c2t -8c moon.patrol,801 moon.patrol.aif

Reading moon.patrol, type binary, segment 1, start: 0x0801, length: 18460

Writing moon.patrol.aif as Apple II formatted aiff.

start: 0x7226, length: 18393, deflated: 0.36%, data time:18.95, inflate time:6.83
WARNING: compression disabled: no significant gain (18.11)

To load up and run on your Apple II, type:

        LOAD

NOTE:  Compression was disabled because it didn't help.

Input:  Binary game without DOS header that should be loaded at $800 as fast
        as possible while being compatible with all Apple IIs.

Command:

c2t -8c super_puckman,800 super_puckman.wav

Reading super_puckman, type binary, segment 1, start: 0x0800, length: 30719

Writing super_puckman.wav as Apple II formatted wave.

start: 0x886C, length: 12691, deflated: 58.69%, data time:13.25, inflate time:5.79

To load up and run on your Apple II, type:

        LOAD

Input:  Three binary files to be loaded at three different addresses.

c2t -2 foo,801 foo.obj,3ffd foo.pic,2000 foo.aif

Reading foo, type binary, segment 1, start: 0x0801, length: 91
Reading foo.obj, type binary, segment 2, start: 0x3FFD, length: 18947
Reading foo.pic, type binary, segment 3, start: 0x2000, length: 8192

Writing foo.aif as Apple II formatted aiff.

To load up and run on your Apple II, type:

        CALL -151
        801.85BR 3FFD.89FFR 2000.3FFFR 

Input:  DOS 3.3 140K diskette image to be loaded with maximum II
        compatibility.  Disk will be formatted first.

Command:

c2t -8 dos33.dsk dos33.wav

Output:

Reading dos33.dsk, type disk, segment 1, start: 0x1000, length: 28672
Reading dos33.dsk, type disk, segment 2, start: 0x1000, length: 28672
Reading dos33.dsk, type disk, segment 3, start: 0x1000, length: 28672
Reading dos33.dsk, type disk, segment 4, start: 0x1000, length: 28672
Reading dos33.dsk, type disk, segment 5, start: 0x1000, length: 28672

Writing dos33.wav as Apple II formatted wave.

Segment: 0, start: 0x459B, length: 19044, deflated: 33.58%, data time:19, inflate time:7.68
Segment: 1, start: 0x74A5, length:  7002, deflated: 75.58%, data time:7, inflate time:3.70
Segment: 2, start: 0x8514, length:  2795, deflated: 90.25%, data time:3, inflate time:2.28
Segment: 3, start: 0x6CD4, length:  9003, deflated: 68.60%, data time:9, inflate time:4.33
Segment: 4, start: 0x6DE6, length:  8729, deflated: 69.56%, data time:9, inflate time:4.27

To load up and run on your Apple II, type:

        LOAD