Update README.md

This commit is contained in:
Terence Boldt 2023-01-08 22:50:22 -05:00 committed by GitHub
parent 91346471ae
commit 382cfebc26
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -10,7 +10,7 @@ The purpose of this project is to provide I/O for an Apple II series 8 bit compu
1. Boot message which waits for RPi to be ready 1. Boot message which waits for RPi to be ready
2. ProDOS bootable drive from image stored on RPi 2. ProDOS bootable drive from image stored on RPi
3. Linux bash shell to the RPi from the Apple II including some VT100 support via `-SHELL` from ProDOS 3. Linux bash shell to the RPi from the Apple II including some VT100 support via `-SHELL` from ProDOS
4. Load binary files directly from the RPi to the II (temporarily removed from firmware but will come back as a utility or dynamic virtual drive 4. Load binary files directly from the RPi to the II (via dynamic virtual drive of current working directory on the RPi)
5. Update Apple II firmware in place from image on RPi (note, this is done per slot) 5. Update Apple II firmware in place from image on RPi (note, this is done per slot)
6. Supports two drive images at the same time 6. Supports two drive images at the same time
7. Supports "RPI" command from BASIC to execute Linux commands from the command prompt or inside BASIC programs: `10 PRINT CHR$(4);"RPI ls -al /"` 7. Supports "RPI" command from BASIC to execute Linux commands from the command prompt or inside BASIC programs: `10 PRINT CHR$(4);"RPI ls -al /"`