Commit Graph

112 Commits

Author SHA1 Message Date
Terence Boldt
2837dd3448 Add support for meta key
Closes #181
Use the Open-Apple key to send meta key (alt)
2024-08-28 18:35:51 -04:00
Terence Boldt
51a64330a4
Update dependencies (#184)
* Update dependencies

* Update driver version
2024-08-28 16:23:39 -04:00
George Kharrat
af873a51cb
GPIO errors on startup (#177)
* GPIO errors on startup

Fixes issue that when booting the card, it sees the Pi and seems to start OK, but "Apple2-IO-RPi not found" is shown twice, then a BASIC prompt. Same error when running "-shell".

* GPIO errors on startup fix addition for Classic edition

Added Type=idle fix for Classic edition
2024-06-25 12:10:18 -04:00
Terence Boldt
1e73e8d886 Fix #170 driver crash on unload drive 2024-06-07 21:39:31 -04:00
Terence Boldt
2a35501ed7
Add release build script (#169)
* Add release build script

* Add EEPROM image to release
2024-05-30 08:48:01 -04:00
Terence Boldt
1336371b49 Update setup.sh 2024-04-02 14:56:42 -04:00
Terence Boldt
0f58e987f1 Update setup and instructions 2024-03-29 12:13:39 -04:00
Terence Boldt
de156de730 Fix Pico build 2024-03-29 12:13:39 -04:00
Terence Boldt
aa5910cee8
Initial Pico hardware support
* Added assemble.cmd for Windows.

In the long run, some (c)make-based cross-plafrom solution seems preferable.

* Fill up the menu page just like the other pages.

* Allow to assemble for different hardware types.

The first script parameter is used to set the ca65 symbol HW_TYPE. Without parameter, HW_TYPE is set to 0.

* Avoid unwanted i/o access.

Depending on the 6502, LDA addr,X and/or STA addr,X produce additional phantom reads. In order to avoid those phantom reads to do i/o access, I used the "classic" approach of moving those reads from page $C0 to page $BF.

* Made use of BIT instruction to access InputFlags from firmware.

Doing the same for access from disk-based software would require selfmodifying code as there's not bit <addr>,x instruction.

* Removed push/pop from GetByte.

After the replacing the rol instructions with bit instructions with a recent chnage, the only reason left to save a to the stack was setting the OutputFlags. But that can be done using x.

* Added InputFlags check for consistency.

* Added support for an alternative hardware type.

The new hardware type has simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers.

* Added another comminucation interface implementation.

Use ACM CDC (or another proprietary) USB serial device for communication.

Currently VID / PID of a Raspberry Pi Pico SDK CDC UART are hardcoded - see https://github.com/raspberrypi/usb-pid

* Revert "Avoid unwanted i/o access."

Neither the original hardware type nor the alternative hardware type have any read and write i/o port share addresses. Therefore phantom reads aren't an issue with those hardware types.

This reverts commit ae5cb754fb.

* Adapt to the different error signatures on Linux.

So far the code was only tested on Windows.

* Added implementation of the alternative hardware type.

The implemenation is based on a Raspberry Pi Pico - see https://github.com/a2retrosystems/A2retroNET

The new hardware type has a simple UART-type interface. Beside the two data registers, there are only the two bits to indicate readability and writability of the data registers.

* Modify the HD image for the alternative hardware type.

It is likely desirable to have two HD images for the two hardware types. And likely the apple2driver program should default to the right one based on its protocol setting. BUt given that the HD image(s) shouldn't be part of the actual Git repo anyhow, I don't do anything about this here and now.

* Fixed shell startup (?)

At least on the alternative hardware, this "blindly sending" a reset command causes the shell to be terminated right away:
The driver acknowldges the reset command with a zero byte - and that byte ends up being read by DumpOutput causing it to branch to endOutput.

Maybe that sending a reset command is beneficial on the original hardware. Then another .if is required. Or DumpOutput shouldn't quit on reading a zero byte - the shell handler doesn't seem to send it on purpose(?)

* Upate HD image with recent shell change.

* Fix shell shutdown (?)

At least on the alternative hardware, things happen this way:
1. The shell 'exit' command has ptyOut signal outputComplete and terminate. At this point, ptyIn is still blocked up to one second in ReadCharacter - and can therefore not react on outputComplete.
2. The outputComplete handler in ShellCommand sends a zero byte. This makes on the A2 DumpOutput return and the caller send a zero byte. ShellCommand must not return here as ptyIn is still blocked.
3. The zero byte from the A2 has ptyIn return from ReadCharacter, signal userCancelled and terminate.
4. ShellCommand can now return, but it must not send a zero byte, as the A2 is not expecting it - and will therefore later misinterpret it.

Maybe the original hardware needs another handling, then differentiation of behavior in shell.go becomes necessary.

* Moved boot text out of IIgs copyright message area.

Having the boot text start at the left border of the third line makes it look nice on the cold boot screen of all Apple II's - and there's where the user sees it for some time while waiting for the RPi to come up.

* Several adjustements:

- Get latest Go version as of now.
- Nowadays (?) GitHub 'git clone' seems to only work with a GitHub account. Therefore the zip download workaround. The becomes hopefully unnecessary soon with Go module magic.
- Use 'go mod tidy' to update .sum file for now.
- Error handling for an empty drive 2 is currently not exactly great, so download Total Replay for drive 2. Unfortunately there's no stable URL as of now.
- Use $USER and $HOME instead of hardcoded values.
- Removed deprecated syslog output directives.

* Added brief fork description.

* Added ProDOS-Utilities reference.

* Reverted back to using 'git clone'.

I've no idea why git acted up the other day :-( Now, everything is back to normal...

* Ignore Pico build directory.

* Updated from https://github.com/a2retrosystems/A2retroNET

* Updated from https://github.com/a2retrosystems/A2retroNET

At this point, nothing at all is done on an A2 reset. This can likely be improved. However, Apple2-IO-RPi doesn't seem to handle A2 reset exactly gracefully anyhow.

In general, it seems desirable to introduce some simple framing protocol - like SLIP - that allows to recover from an A2 reset in the middle of an Apple2-IO-RPi command execution.

Such a framing protocol would allow to introduce different frame types. One frame type could then be an A2 reset frame sent by the A2retroNET firmware.

* Make use of brand new stable Total Replay download URL.

Thanks to 4am :-)

* Fixed typos.

* Clone upstream ProDOS-Utilities.

My ProDOS-Utilities pull request was merged.

* Added support for boards without LED.

* Updated link.

* Adjusted to the current A2retroNET hardware.

* Removed support for the Pico W.

* Updated URL.

* Updated URL.

* Make use A2Pico library.

* Added link to A2Pico.

* Remove intermediates from repo.

* Build intermediates from Pico build.

* Have LED reflect status of logic ACM connection.

* Update upstream repo references.

* Adjust build instructions.

* Update README.md

* Fix build and update dependencies

* Fix binary comparison

* Fix firware bug on classic hardware

---------

Co-authored-by: Oliver Schmidt <ol.sc@web.de>
2024-02-05 22:49:09 -05:00
Terence Boldt
729ea131db Update ProDOS to 2.4.3 2024-01-02 19:54:35 -08:00
Terence Boldt
2281d03128 Update copyright for 2024 2024-01-02 19:54:35 -08:00
Terence Boldt
f6002fa7f9 Update dependencies 2023-12-04 23:29:26 -05:00
Terence Boldt
3840db1a35
Fix nano with enter key as 0x0D (#158) 2023-12-04 23:23:59 -05:00
Terence Boldt
bde5767314
Fix keyboard delay (#152) 2023-11-01 20:00:21 -04:00
Terence Boldt
8d5aa26b78
Add backoff to reduce CPU usage (fixes #141) (#151)
* Add backoff to reduce CPU usage

* Update driver version for CPU fix
2023-10-31 23:04:15 -04:00
Terence Boldt
0dbb55fda1 Add 64 bit OS support, upgrade Go, allow non-pi user 2023-10-31 21:51:06 -04:00
Terence Boldt
5db78ba3b9
Do apt update before installation
Fixes #140
2023-04-04 18:56:22 -04:00
Terence Boldt
cca6d43657
Update library for security fix (#135) 2023-03-01 05:33:15 -07:00
Terence Boldt
9883348baa
Add drive load (#133) 2023-02-04 19:09:57 -05:00
Terence Boldt
ad6d103cca
Fix hang after shell exit (#131) 2023-01-30 20:45:24 -05:00
Terence Boldt
554d3390d6
Set default dir to driveimage (#125) 2023-01-26 22:33:08 -05:00
Terence Boldt
813ab1caee
Change bas files to symlinks (#123) 2023-01-25 23:07:09 -05:00
Terence Boldt
b10dec3e50
Add live drive regeneration and loading (#122) 2023-01-25 22:32:47 -05:00
Terence Boldt
841b11f9ae
Add graphics conversion
* Update copyright year

* Update module to add image support
2023-01-14 10:51:39 -05:00
Terence Boldt
91346471ae
Update driver version 2023-01-08 22:35:15 -05:00
Terence Boldt
28dc09a877
Dynamic drive (#114)
* Fix for when not using dynamic drive
2023-01-08 18:03:57 -05:00
Terence Boldt
a13866a458 Fix boot of dynamic drive 2022-12-31 12:39:15 -05:00
Terence Boldt
f0e67ea5ff Fix dynamic drive 2022-12-31 12:39:15 -05:00
Terence Boldt
91efe725b7 Add dynamic drive support 2022-12-31 12:39:15 -05:00
Terence Boldt
4b7d990209 Fix security warnings in setup.sh 2022-04-27 22:50:04 -04:00
Terence Boldt
ed2acd9d5f Update boot image 2022-04-27 22:36:27 -04:00
Terence Boldt
da04931665 Add error handling 2022-04-27 22:36:27 -04:00
Terence Boldt
74702e2cb5 Fix setup script 2022-03-19 14:08:22 -04:00
Terence Boldt
9f85fba5ad Add setup script 2022-03-19 14:05:20 -04:00
Terence Boldt
55d94dd1f0 Update RPi.Command and driver for it 2022-03-03 22:34:45 -05:00
Terence Boldt
a751737bf1 Update version numbers 2022-03-01 22:46:03 -05:00
Terence Boldt
661c2fc8f6 Fixes #94 VT100 arrow keys for application mode 2022-03-01 08:26:54 -05:00
Terence Boldt
049e8770d2 Fix keyboard input glitch on read 2022-02-23 22:42:19 -05:00
Terence Boldt
1f4c9ddf4d Fix #56 shell crash on key autorepeat 2022-02-22 15:43:54 -05:00
Terence Boldt
791085e14a Update version number 2022-02-16 08:08:30 -05:00
Terence Boldt
25e70d771e Add rpio line configuration 2022-02-15 18:56:02 -05:00
Terence Boldt
a75338f480 Replace periph with rpio for gpio 2022-02-14 21:02:55 -05:00
Terence Boldt
e53c722715 Add version info comment 2022-02-07 22:25:52 -05:00
Terence Boldt
495a083ddb Update help with a2version 2022-02-07 22:19:56 -05:00
Terence Boldt
78d0b86b2f Add version info 2022-02-07 22:01:06 -05:00
Terence Boldt
b1dc22c838 Auto-detect slot number for RPI.COMMAND 2022-02-06 21:06:22 -05:00
Terence Boldt
c6fc90e21f Update copyright notices 2022-01-10 23:00:58 -05:00
Terence Boldt
d900120907 Fixes #57 reset state on shell exit 2022-01-10 19:28:41 -05:00
Terence Boldt
50b7150364 Update drive image with latest shell 2021-12-31 13:16:16 -05:00
Terence Boldt
dc52abf640 Make wifi region configurable 2021-12-31 08:43:48 -05:00