mirror of
https://github.com/ThorstenBr/FloppyEmuDiskIIEnclosure.git
synced 2024-12-28 16:30:28 +00:00
313 lines
9.5 KiB
OpenSCAD
313 lines
9.5 KiB
OpenSCAD
// Copyright 2022 Thorsten Brehm
|
|
// brehmt (at) gmail dot com
|
|
|
|
module imprint(x,y,z)
|
|
{
|
|
Font = "Liberation Sans:style=Bold";
|
|
FontSize = 3;
|
|
translate([x,y,z])
|
|
rotate([270,0,0])
|
|
{
|
|
linear_extrude(height = 0.4) { text(IMPRINT, font = Font, size = FontSize, halign="center", valign="bottom"); }
|
|
}
|
|
}
|
|
|
|
|
|
// little mounting point, so the base plate does not drop when glueing to the top shell
|
|
module makeGlueHelper(Width)
|
|
{
|
|
SupportAngle = 35;
|
|
intersection()
|
|
{
|
|
union()
|
|
{
|
|
translate([-20, 0, 0])
|
|
rotate([0, 0, SupportAngle])
|
|
translate([-20,-25,-Width/2])
|
|
cube([40, 50, Width]);
|
|
}
|
|
translate([0,0,-Width/2]) cube([40,50,Width]);
|
|
}
|
|
}
|
|
|
|
// little mounting points to help when glueing the base to the top shell
|
|
module makeGlueMountingPoints()
|
|
{
|
|
SupportWidth = 5; // 10mm
|
|
//SupportXOffset = -36.9;
|
|
SupportXOffset1 = -28;//34.9;
|
|
//SupportXOffset2 = SupportXOffset1+32.1;
|
|
SupportXOffset2 = 32.1;
|
|
// support for bottom curved edges
|
|
SupportYOffset = 0;
|
|
|
|
FrontZ = FrontPanelZLedge+FrontPanelZOffset+SKIN*5; // front position
|
|
RearZ = BoxZ_Depth-RearWallZLedge-RearWallZOffset-5*SKIN; // rear position
|
|
intersection()
|
|
{
|
|
union()
|
|
{
|
|
for (z=[FrontZ, RearZ, (FrontZ+RearZ)/2])
|
|
{
|
|
// right
|
|
translate([0, SupportYOffset, z]) makeGlueHelper(SupportWidth);
|
|
|
|
// left
|
|
translate([BoxX_Width, SupportYOffset, z]) rotate([0, 180, 0]) makeGlueHelper(SupportWidth);
|
|
}
|
|
}
|
|
// cut away anything which is outside the shell
|
|
outerBox(SKIN, BoxX_Width, BoxY_Height, BoxZ_Depth, Box_Corner_Radius);
|
|
}
|
|
}
|
|
|
|
module makeTopStiffeners()
|
|
{
|
|
SupportWidth = 15;
|
|
// front right
|
|
translate([0, BoxY_Height-SupportWidth, FrontPanelZOffset+SKIN*2+15]) rotate([0,90,0]) prism(SKIN, SupportWidth, SupportWidth);
|
|
// front left
|
|
translate([BoxX_Width, BoxY_Height-SupportWidth, FrontPanelZOffset+SKIN+15]) rotate([0,270,0]) prism(SKIN, SupportWidth, 10);
|
|
// center right
|
|
translate([0, BoxY_Height-SupportWidth, BoxZ_Depth/2]) rotate([0,90,0]) prism(SKIN, SupportWidth, SupportWidth);
|
|
// center left
|
|
translate([BoxX_Width, BoxY_Height-SupportWidth, BoxZ_Depth/2-SKIN]) rotate([0,270,0]) prism(SKIN, SupportWidth, SupportWidth);
|
|
// rear right
|
|
translate([0, BoxY_Height-SupportWidth, BoxZ_Depth-RearWallZOffset-SKIN-3-2]) rotate([0,90,0]) prism(SKIN, SupportWidth, SupportWidth);
|
|
// rear left
|
|
translate([BoxX_Width, BoxY_Height-SupportWidth, BoxZ_Depth-RearWallZOffset-3-SKIN*2-2]) rotate([0,270,0]) prism(SKIN, SupportWidth, SupportWidth);
|
|
}
|
|
|
|
module roundedEdge()
|
|
{
|
|
translate([-SKIN, 0, 30]) rotate([270, 0, 0]) roundedCube(2, 30, SKIN, 1);
|
|
}
|
|
|
|
module roundCorner()
|
|
{
|
|
$fn=24;
|
|
Radius = TopGrooveCornerRadius/2;
|
|
translate([0,1,0]) rotate([270, 0, 0])
|
|
translate([-Radius-TopGrooveYDepth, -Radius-TopGrooveYDepth, 0])
|
|
intersection()
|
|
{
|
|
torus(Radius, TopGrooveYDepth);
|
|
cube([Radius*2, Radius*2, TopGrooveYDepth]);
|
|
}
|
|
}
|
|
|
|
module makeRoundGapEdges()
|
|
{
|
|
// front left
|
|
translate([FrontGapX-FrontGapWidth/2-1, -SKIN, 0]) roundedEdge();
|
|
translate([FrontGapX+FrontGapWidth/2+1, -SKIN, 0]) roundedEdge();
|
|
|
|
// front right
|
|
translate([BoxX_Width-FrontGapX-FrontGapWidth/2-1, -SKIN, 0]) roundedEdge();
|
|
translate([BoxX_Width-FrontGapX+FrontGapWidth/2+1, -SKIN, 0]) roundedEdge();
|
|
|
|
// rear left
|
|
translate([FrontGapX-FrontGapWidth/2-1, -SKIN, BoxZ_Depth-30]) roundedEdge();
|
|
|
|
// rear right
|
|
translate([BoxX_Width-FrontGapX+FrontGapWidth/2+1, -SKIN, BoxZ_Depth-30]) roundedEdge();
|
|
}
|
|
|
|
module makeGaps()
|
|
{
|
|
// front gaps
|
|
translate([FrontGapX-FrontGapWidth/2-1, -SKIN, 0]) cube([FrontGapWidth+2, SKIN*2, FrontGapY]);
|
|
translate([BoxX_Width-FrontGapX-FrontGapWidth/2-1, -SKIN, 0]) cube([FrontGapWidth+2, SKIN*2, FrontGapY]);
|
|
|
|
// rear gap
|
|
translate([FrontGapX-FrontGapWidth/2-1, -SKIN, BoxZ_Depth-10]) cube([BoxX_Width-2*FrontGapX+FrontGapWidth+2, SKIN*2, 10]);
|
|
}
|
|
|
|
module ventilationCut()
|
|
{
|
|
translate([-SKIN, BoxY_Height-VentilationYHeight,BoxZ_Depth-VentilationZOffset]) rotate([0, 90, 0])
|
|
roundedCube(VentilationWidth, VentilationYHeight, SKIN, VentilationWidth/2);
|
|
|
|
translate([BoxX_Width, BoxY_Height-VentilationYHeight,BoxZ_Depth-VentilationZOffset]) rotate([0, 90, 0])
|
|
roundedCube(VentilationWidth, VentilationYHeight, SKIN, VentilationWidth/2);
|
|
|
|
translate([-SKIN-VentilationYHeight+VentilationXLength, BoxY_Height+SKIN,BoxZ_Depth-VentilationZOffset]) rotate([90, 90, 0])
|
|
roundedCube(VentilationWidth, VentilationYHeight, SKIN+5, VentilationWidth/2);
|
|
|
|
translate([BoxX_Width-VentilationXLength, BoxY_Height+SKIN,BoxZ_Depth-VentilationZOffset]) rotate([90, 90, 0])
|
|
roundedCube(VentilationWidth, VentilationYHeight, SKIN+5, VentilationWidth/2);
|
|
}
|
|
|
|
module makeVentilation()
|
|
{
|
|
for (z = [0 : 1: VentilationCount-1])
|
|
{
|
|
translate([0, 0, -z*VentilationZDistance]) ventilationCut();
|
|
}
|
|
}
|
|
|
|
|
|
module makeScrewHoles()
|
|
{
|
|
// front hole
|
|
translate([FrontGapX/2, -SKIN, FrontPanelZOffset+FrontPanelZLedge/2]) rotate([270, 0, 0])
|
|
hole(ScrewDiameter, 10);
|
|
|
|
// front hole
|
|
translate([BoxX_Width-FrontGapX/2, -SKIN, FrontPanelZOffset+FrontPanelZLedge/2]) rotate([270, 0, 0])
|
|
hole(ScrewDiameter, 10);
|
|
|
|
// rear hole
|
|
translate([FrontGapX/2, -SKIN , BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
|
|
hole(ScrewDiameter, 10);
|
|
|
|
// rear hole
|
|
translate([BoxX_Width-FrontGapX/2, -SKIN, BoxZ_Depth-RearWallZOffset-RearWallZLedge/2]) rotate([270, 0, 0])
|
|
hole(ScrewDiameter, 10);
|
|
|
|
// rear PCB holes
|
|
translate([BoxX_Width/2-PcbXWidth/2, 0, PcbZOfs])
|
|
{
|
|
translate([PcbScrewDistance, -SKIN,PcbZDepth-PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, SKIN);
|
|
translate([PcbXWidth-PcbScrewDistance, -SKIN,PcbZDepth-PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, SKIN);
|
|
}
|
|
}
|
|
|
|
GrooveSupportZOffset = (BoxZ_Depth-2*TopGrooveZLength)/3;
|
|
GrooveXOfs = BoxX_Width/2-(TopGrooveXWidth+4)/2;
|
|
|
|
module makeTopGroovesSupport()
|
|
{
|
|
translate([GrooveXOfs, BoxY_Height-TopGrooveYDepth, GrooveSupportZOffset+TopGrooveZLength+2]) rotate([270, 0, 0])
|
|
roundedCube(TopGrooveXWidth+4, TopGrooveZLength+4, TopGrooveYDepth, TopGrooveCornerRadius);
|
|
|
|
translate([GrooveXOfs, BoxY_Height-TopGrooveYDepth, GrooveSupportZOffset*2+TopGrooveZLength*2+2]) rotate([270, 0, 0])
|
|
roundedCube(TopGrooveXWidth+4, TopGrooveZLength+4, TopGrooveYDepth, TopGrooveCornerRadius);
|
|
}
|
|
|
|
module makeTopGroovesEdges()
|
|
{
|
|
for (z=[GrooveSupportZOffset,2*GrooveSupportZOffset+TopGrooveZLength])
|
|
translate([GrooveXOfs+2, BoxY_Height-TopGrooveYDepth+SKIN, z])
|
|
{
|
|
// right edge
|
|
translate([0, 0, 4+TopGrooveZLength/2-5])
|
|
cylinderLedge(TopGrooveYDepth, TopGrooveZLength);
|
|
|
|
// left edge
|
|
translate([TopGrooveXWidth, 0, 4+TopGrooveZLength/2-5])
|
|
rotate([0, 180, 0]) cylinderLedge(TopGrooveYDepth, TopGrooveZLength);
|
|
|
|
// front edge
|
|
translate([TopGrooveXWidth/2, 0, 0])
|
|
rotate([0, 270, 0]) cylinderLedge(TopGrooveYDepth, TopGrooveXWidth);
|
|
|
|
// rear edge
|
|
translate([TopGrooveXWidth/2, 0, TopGrooveZLength])
|
|
rotate([0, 90, 0]) cylinderLedge(TopGrooveYDepth, TopGrooveXWidth);
|
|
|
|
// rear right corner
|
|
translate([TopGrooveXWidth, -1, 0]) roundCorner();
|
|
|
|
// rear left corner
|
|
translate([0, -1, 0]) rotate([0, 90, 0]) roundCorner();
|
|
|
|
// front right corner
|
|
translate([TopGrooveXWidth, -1, TopGrooveZLength]) rotate([0, 270, 0]) roundCorner();
|
|
|
|
// front left corner
|
|
translate([0, -1, TopGrooveZLength]) rotate([0, 180, 0]) roundCorner();
|
|
|
|
}
|
|
}
|
|
|
|
module makeTopGrooves()
|
|
{
|
|
GrooveZOffset = (BoxZ_Depth-2*TopGrooveZLength)/3;
|
|
translate([BoxX_Width/2-TopGrooveXWidth/2, BoxY_Height-TopGrooveYDepth+SKIN, GrooveZOffset+TopGrooveZLength]) rotate([270, 0, 0])
|
|
roundedCube(TopGrooveXWidth, TopGrooveZLength, TopGrooveYDepth, TopGrooveCornerRadius);
|
|
|
|
translate([BoxX_Width/2-TopGrooveXWidth/2, BoxY_Height-TopGrooveYDepth+SKIN, GrooveZOffset*2+TopGrooveZLength*2]) rotate([270, 0, 0])
|
|
roundedCube(TopGrooveXWidth, TopGrooveZLength, TopGrooveYDepth, TopGrooveCornerRadius);
|
|
}
|
|
|
|
// little supports to prevent the front and rear panels from bending into the case
|
|
module makeTopPanelSupports()
|
|
{
|
|
Distance = 10; // distance of the supports from the left/right edge of the box
|
|
SupportWidth = 3; // x,z size of the supports
|
|
SupportYHeight = 4; // y size of the supports (cube)
|
|
// front left
|
|
translate([BoxX_Width-5, BoxY_Height-SupportYHeight, FrontPanelZOffset+SKIN])
|
|
cube([SupportWidth, SupportYHeight, SupportWidth]);
|
|
// front right
|
|
translate([18, BoxY_Height-SupportYHeight, FrontPanelZOffset+SKIN])
|
|
cube([SupportWidth, SupportYHeight, SupportWidth]);
|
|
// front center
|
|
translate([BoxX_Width/2-4, BoxY_Height-SupportYHeight, FrontPanelZOffset+SKIN])
|
|
cube([SupportWidth, SupportYHeight, SupportWidth]);
|
|
|
|
// rear
|
|
translate([BoxX_Width-RearWallCableGapXOffset/2-SupportWidth,
|
|
BoxY_Height-SupportYHeight, BoxZ_Depth-RearWallZOffset-SKIN-SupportWidth])
|
|
cube([SupportWidth, SupportYHeight, SupportWidth]);
|
|
translate([Distance, BoxY_Height-SupportYHeight, BoxZ_Depth-RearWallZOffset-SKIN-SupportWidth])
|
|
cube([SupportWidth, SupportYHeight, SupportWidth]);
|
|
}
|
|
|
|
|
|
module makeThing()
|
|
{
|
|
union()
|
|
{
|
|
difference()
|
|
{
|
|
union()
|
|
{
|
|
box(SKIN, BoxX_Width, BoxY_Height, BoxZ_Depth, Box_Corner_Radius);
|
|
makeTopGroovesSupport();
|
|
makeGlueMountingPoints();
|
|
}
|
|
makeGaps();
|
|
makeVentilation();
|
|
makeTopGrooves();
|
|
makeScrewHoles();
|
|
|
|
if (prototype == "yes")
|
|
{
|
|
removePrototypeAreas();
|
|
}
|
|
}
|
|
makeRoundGapEdges();
|
|
makeTopGroovesEdges();
|
|
makeTopPanelSupports();
|
|
makeTopStiffeners();
|
|
}
|
|
}
|
|
|
|
module makeMask()
|
|
{
|
|
XOffs = 3.5*ScalingFactor;
|
|
translate([XOffs/2, -BoxY_Height, 0]) cube([BoxX_Width-XOffs, BoxY_Height+SKIN, BoxZ_Depth]);
|
|
}
|
|
|
|
module makeTop()
|
|
{
|
|
difference()
|
|
{
|
|
makeThing();
|
|
makeMask();
|
|
}
|
|
}
|
|
|
|
module makeBottom()
|
|
{
|
|
intersection()
|
|
{
|
|
makeThing();
|
|
makeMask();
|
|
}
|
|
imprint(BoxX_Width/2,0,BoxZ_Depth-RearWallZLedge-RearWallZOffset);
|
|
}
|
|
|