FloppyEmuDiskIIEnclosure/scad/components/pcb.scad
2022-05-17 00:08:49 +02:00

45 lines
1.6 KiB
OpenSCAD

// Copyright 2022 Thorsten Brehm
// brehmt (at) gmail dot com
// floppy emu PCB
module makePcb()
{
translate([BoxX_Width/2 - PcbXWidth/2+PcbXOfs, PcbYOfs, PcbZOfs])
{
difference()
{
// PCB
cube([PcbXWidth, PcbYHeight, PcbZDepth]);
// front holes
translate([PcbScrewDistance,0,PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, PcbYHeight);
translate([PcbXWidth-PcbScrewDistance,0,PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, PcbYHeight);
// rear holes
translate([PcbScrewDistance,0,PcbZDepth-PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, PcbYHeight);
translate([PcbXWidth-PcbScrewDistance,0,PcbZDepth-PcbScrewDistance]) rotate([270, 0, 0]) hole(PcbScrewDiameter, PcbYHeight);
}
}
}
module makeRearPcbFeet(center)
{
//translate([BoxX_Width/2 - PcbXWidth/2+PcbXOfs, PcbYOfs, PcbZDepth+PcbZOfs])
rotate([90,0,90])
{
difference()
{
translate([-PcbScrewDiameter/2, -SKIN, -PcbScrewDistance-PcbScrewDiameter])
cube([PcbXWidth+PcbScrewDiameter, SKIN, PcbScrewDiameter*2]);
// holes
translate([PcbScrewDistance,-SKIN,-PcbScrewDistance]) rotate([270, 0, 0])
hole(PcbScrewDiameter, PcbYHeight);
translate([PcbXWidth-PcbScrewDistance,-SKIN,-PcbScrewDistance]) rotate([270, 0, 0])
hole(PcbScrewDiameter, PcbYHeight);
}
FeetYHeight = PcbYOfs-SKIN;
translate([PcbScrewDistance,-SKIN,-PcbScrewDistance]) rotate([90, 0, 0])
screwPost(FeetYHeight, PcbScrewDiameter*2, PcbScrewDiameter, FeetYHeight, 0);
translate([PcbXWidth-PcbScrewDistance,-SKIN,-PcbScrewDistance]) rotate([90, 0, 0])
screwPost(FeetYHeight, PcbScrewDiameter*2, PcbScrewDiameter, FeetYHeight, 0);
}
}