diff --git a/Firmware/BlankDriveWithFirmware.po b/Firmware/BlankDriveWithFirmware.po
index 0c054e8..43ff912 100644
Binary files a/Firmware/BlankDriveWithFirmware.po and b/Firmware/BlankDriveWithFirmware.po differ
diff --git a/Firmware/Firmware.asm b/Firmware/Firmware.asm
index fced17d..599e679 100644
--- a/Firmware/Firmware.asm
+++ b/Firmware/Firmware.asm
@@ -22,6 +22,11 @@
   highLatch = $FF
   knownRts   = $FF58
 
+;autostart ROM next card
+  sloop = $FABA
+  keyboard = $C000
+  clearKeyboard = $C010
+
   .org  $C700
   ;code is relocatable
   ; but set to $c700 for
@@ -33,7 +38,14 @@
   cpx  #$03    ;
   cpx  #$3C    ;this one for older II's
 
+;check for ESC key and if so, jump to next slot in autostart
+  lda keyboard
+  cmp #$9B
+  bne start
+  jmp sloop
+
 ;zero out block numbers and buffer address
+start:
   sty	 buflo
   sty  blklo
   sty  blkhi
@@ -90,18 +102,13 @@ getstat:
   rts
 
 readblk:
-  lda ioAddressLo
-  pha
-  lda ioAddressHi
-  pha
-  lda tempY
-  pha
-  lda blockHalfCounter
-  pha
-  lda lowLatch
-  pha
-  lda highLatch
+saveVars:
+  ldy #ioAddressLo
+varLoop:
+  lda $00,y
   pha
+  iny
+  bne varLoop
   
   lda  blkhi	;get hi block
   asl  a    ;shift up to top 3 bits
diff --git a/Firmware/Firmware.bin b/Firmware/Firmware.bin
index 7ba125a..8de6ac9 100644
Binary files a/Firmware/Firmware.bin and b/Firmware/Firmware.bin differ
diff --git a/Firmware/Firmware.lst b/Firmware/Firmware.lst
index 414c2ca..1e42fff 100644
--- a/Firmware/Firmware.lst
+++ b/Firmware/Firmware.lst
@@ -26,6 +26,11 @@ Current file: Firmware.asm
 000000r 1                 highLatch = $FF
 000000r 1                 knownRts   = $FF58
 000000r 1               
+000000r 1               ;autostart ROM next card
+000000r 1                 sloop = $FABA
+000000r 1                 keyboard = $C000
+000000r 1                 clearKeyboard = $C010
+000000r 1               
 000000r 1                 .org  $C700
 00C700  1                 ;code is relocatable
 00C700  1                 ; but set to $c700 for
@@ -37,185 +42,187 @@ Current file: Firmware.asm
 00C704  1  E0 03          cpx  #$03    ;
 00C706  1  E0 3C          cpx  #$3C    ;this one for older II's
 00C708  1               
-00C708  1               ;zero out block numbers and buffer address
-00C708  1  84 44          sty	 buflo
-00C70A  1  84 46          sty  blklo
-00C70C  1  84 47          sty  blkhi
-00C70E  1  C8             iny				;set command = 1 for read block
-00C70F  1  84 42          sty  command
-00C711  1  20 58 FF       jsr  knownRts ;jump to known RTS to get our address from the stack
-00C714  1  BA             tsx
-00C715  1  BD 00 01       lda  $0100,x ;this for example would be $C7 in slot 7
-00C718  1  85 45          sta  bufhi   ;keep the slot here
-00C71A  1  0A             asl
-00C71B  1  0A             asl
-00C71C  1  0A             asl
-00C71D  1  0A             asl
-00C71E  1  85 43          sta unit
-00C720  1               
-00C720  1               ;display copyright message
-00C720  1  A0 CE          ldy  #<text
-00C722  1               drawtxt:
-00C722  1  B1 44          lda  (buflo),y
-00C724  1  F0 06          beq  boot
-00C726  1  99 02 07       sta  $07D0-<text,y ;put text on last line
-00C729  1  C8             iny
-00C72A  1  D0 F6          bne  drawtxt
-00C72C  1               
-00C72C  1               ;load block 0000 at $0800
-00C72C  1               boot:
-00C72C  1  A9 08          lda  #$08 ;push $0800 onto the stack so an RTS will run at $0801
-00C72E  1  85 45          sta  bufhi
-00C730  1  48             pha
-00C731  1  A9 00          lda #$00
-00C733  1  48             pha
-00C734  1               ;This is the ProDOS entry point for this card
-00C734  1               entry:
-00C734  1  A6 43          ldx  unit  ;make sure it's drive 1
-00C736  1  10 04          bpl  docmd ;yep, do command
-00C738  1  38             sec				 ;nope, set device not connected
-00C739  1  A9 28          lda  #nodev
-00C73B  1  60             rts        ;go back to ProDOS
-00C73C  1               
-00C73C  1               docmd:
-00C73C  1  A5 42          lda  command
-00C73E  1  F0 08          beq  getstat ;command 0 is GetStatus
-00C740  1  C9 01          cmp  #$01
-00C742  1  F0 0C          beq  readblk ;command 1 is ReadBlock
-00C744  1  38             sec          ;Format/Write not permitted
-00C745  1  A9 2B          lda  #wperr  ;write protect error
-00C747  1  60             rts          ;go back to ProDOS
-00C748  1               
-00C748  1               getstat:
-00C748  1  18             clc       ;send back status
-00C749  1  A9 00          lda  #$00 ;good status
-00C74B  1  A2 00          ldx  #$00 ;1024 blocks
-00C74D  1  A0 04          ldy  #$04 ;
-00C74F  1  60             rts
-00C750  1               
-00C750  1               readblk:
-00C750  1  A5 FA          lda ioAddressLo
-00C752  1  48             pha
-00C753  1  A5 FB          lda ioAddressHi
-00C755  1  48             pha
-00C756  1  A5 FC          lda tempY
-00C758  1  48             pha
-00C759  1  A5 FD          lda blockHalfCounter
-00C75B  1  48             pha
-00C75C  1  A5 FE          lda lowLatch
-00C75E  1  48             pha
-00C75F  1  A5 FF          lda highLatch
-00C761  1  48             pha
-00C762  1               
-00C762  1  A5 47          lda  blkhi	;get hi block
-00C764  1  0A             asl  a    ;shift up to top 3 bits
-00C765  1  0A             asl  a    ;since that's all the high
-00C766  1  0A             asl  a    ;blocks we can handle
-00C767  1  0A             asl  a    ;
+00C708  1               ;check for ESC key and if so, jump to next slot in autostart
+00C708  1  AD 00 C0       lda keyboard
+00C70B  1  C9 9B          cmp #$9B
+00C70D  1  D0 03          bne start
+00C70F  1  4C BA FA       jmp sloop
+00C712  1               
+00C712  1               ;zero out block numbers and buffer address
+00C712  1               start:
+00C712  1  84 44          sty	 buflo
+00C714  1  84 46          sty  blklo
+00C716  1  84 47          sty  blkhi
+00C718  1  C8             iny				;set command = 1 for read block
+00C719  1  84 42          sty  command
+00C71B  1  20 58 FF       jsr  knownRts ;jump to known RTS to get our address from the stack
+00C71E  1  BA             tsx
+00C71F  1  BD 00 01       lda  $0100,x ;this for example would be $C7 in slot 7
+00C722  1  85 45          sta  bufhi   ;keep the slot here
+00C724  1  0A             asl
+00C725  1  0A             asl
+00C726  1  0A             asl
+00C727  1  0A             asl
+00C728  1  85 43          sta unit
+00C72A  1               
+00C72A  1               ;display copyright message
+00C72A  1  A0 CF          ldy  #<text
+00C72C  1               drawtxt:
+00C72C  1  B1 44          lda  (buflo),y
+00C72E  1  F0 06          beq  boot
+00C730  1  99 01 07       sta  $07D0-<text,y ;put text on last line
+00C733  1  C8             iny
+00C734  1  D0 F6          bne  drawtxt
+00C736  1               
+00C736  1               ;load block 0000 at $0800
+00C736  1               boot:
+00C736  1  A9 08          lda  #$08 ;push $0800 onto the stack so an RTS will run at $0801
+00C738  1  85 45          sta  bufhi
+00C73A  1  48             pha
+00C73B  1  A9 00          lda #$00
+00C73D  1  48             pha
+00C73E  1               ;This is the ProDOS entry point for this card
+00C73E  1               entry:
+00C73E  1  A6 43          ldx  unit  ;make sure it's drive 1
+00C740  1  10 04          bpl  docmd ;yep, do command
+00C742  1  38             sec				 ;nope, set device not connected
+00C743  1  A9 28          lda  #nodev
+00C745  1  60             rts        ;go back to ProDOS
+00C746  1               
+00C746  1               docmd:
+00C746  1  A5 42          lda  command
+00C748  1  F0 08          beq  getstat ;command 0 is GetStatus
+00C74A  1  C9 01          cmp  #$01
+00C74C  1  F0 0C          beq  readblk ;command 1 is ReadBlock
+00C74E  1  38             sec          ;Format/Write not permitted
+00C74F  1  A9 2B          lda  #wperr  ;write protect error
+00C751  1  60             rts          ;go back to ProDOS
+00C752  1               
+00C752  1               getstat:
+00C752  1  18             clc       ;send back status
+00C753  1  A9 00          lda  #$00 ;good status
+00C755  1  A2 00          ldx  #$00 ;1024 blocks
+00C757  1  A0 04          ldy  #$04 ;
+00C759  1  60             rts
+00C75A  1               
+00C75A  1               readblk:
+00C75A  1               saveVars:
+00C75A  1  A0 FA          ldy #ioAddressLo
+00C75C  1               varLoop:
+00C75C  1  B9 00 00       lda $00,y
+00C75F  1  48             pha
+00C760  1  C8             iny
+00C761  1  D0 F9          bne varLoop
+00C763  1               
+00C763  1  A5 47          lda  blkhi	;get hi block
+00C765  1  0A             asl  a    ;shift up to top 3 bits
+00C766  1  0A             asl  a    ;since that's all the high
+00C767  1  0A             asl  a    ;blocks we can handle
 00C768  1  0A             asl  a    ;
-00C769  1  85 FF          sta  highLatch
-00C76B  1  A5 46          lda  blklo   ;get low block
-00C76D  1  4A             lsr  a    ;shift so we get the top 5
-00C76E  1  4A             lsr  a    ;bits - this also goes in
-00C76F  1  4A             lsr  a    ;the high latch
-00C770  1  05 FF          ora  highLatch ;add it to those top 3 bits
-00C772  1  85 FF        	sta  highLatch ;save it back in scratch ram
-00C774  1  9D 81 C0       sta  writeLatchHigh,x	;set high latch for card
-00C777  1  A5 46          lda  blklo   ;get low block
-00C779  1  0A             asl  a    ;shift it to top 3 bits
-00C77A  1  0A             asl  a    ;
+00C769  1  0A             asl  a    ;
+00C76A  1  85 FF          sta  highLatch
+00C76C  1  A5 46          lda  blklo   ;get low block
+00C76E  1  4A             lsr  a    ;shift so we get the top 5
+00C76F  1  4A             lsr  a    ;bits - this also goes in
+00C770  1  4A             lsr  a    ;the high latch
+00C771  1  05 FF          ora  highLatch ;add it to those top 3 bits
+00C773  1  85 FF        	sta  highLatch ;save it back in scratch ram
+00C775  1  9D 81 C0       sta  writeLatchHigh,x	;set high latch for card
+00C778  1  A5 46          lda  blklo   ;get low block
+00C77A  1  0A             asl  a    ;shift it to top 3 bits
 00C77B  1  0A             asl  a    ;
 00C77C  1  0A             asl  a    ;
 00C77D  1  0A             asl  a    ;
-00C77E  1  85 FE          sta lowLatch
-00C780  1  A9 02          lda  #$02
-00C782  1  85 FD          sta  blockHalfCounter
-00C784  1  A9 C0          lda #$C0
-00C786  1  85 FB          sta ioAddressHi
-00C788  1               
-00C788  1               ;This gets 256 bytes from the ROM card
-00C788  1               
-00C788  1               read256:
-00C788  1  A0 00          ldy  #$00
-00C78A  1               loop256:
-00C78A  1  A5 FE          lda  lowLatch
-00C78C  1  9D 80 C0       sta  writeLatchLow,x
-00C78F  1  8A             txa
-00C790  1  09 80          ora  #$80
-00C792  1  85 FA          sta  ioAddressLo
-00C794  1               
-00C794  1               loop16:
-00C794  1  84 FC          sty  tempY
-00C796  1  A0 00          ldy  #$00
-00C798  1  B1 FA          lda  (ioAddressLo),y
-00C79A  1  A4 FC          ldy  tempY
-00C79C  1  91 44          sta  (buflo),y
-00C79E  1  C8             iny
-00C79F  1  E6 FA          inc  ioAddressLo
-00C7A1  1  A5 FA          lda  ioAddressLo
-00C7A3  1  29 0F          and  #$0F
-00C7A5  1  D0 ED          bne  loop16
-00C7A7  1               
-00C7A7  1               continue256:
-00C7A7  1  E6 FE          inc  lowLatch
-00C7A9  1  C0 00          cpy  #$00
-00C7AB  1  D0 DD          bne  loop256
-00C7AD  1  C6 FD          dec  blockHalfCounter
-00C7AF  1  D0 18          bne  readnext256
-00C7B1  1               
-00C7B1  1               finish:
-00C7B1  1  68             pla
-00C7B2  1  85 FF          sta highLatch
-00C7B4  1  68             pla
-00C7B5  1  85 FE          sta lowLatch
-00C7B7  1  68             pla
-00C7B8  1  85 FD          sta blockHalfCounter
-00C7BA  1  68             pla
-00C7BB  1  85 FC          sta tempY
-00C7BD  1  68             pla
-00C7BE  1  85 FB          sta ioAddressHi
-00C7C0  1  68             pla
-00C7C1  1  85 FA          sta ioAddressLo
-00C7C3  1               
-00C7C3  1  C6 45          dec  bufhi
-00C7C5  1  18             clc       ;clear error code for success
-00C7C6  1  A9 00          lda  #$00
-00C7C8  1  60             rts
-00C7C9  1               
-00C7C9  1               readnext256:
-00C7C9  1  E6 45          inc  bufhi   ; set buffer to receive next 256 bytes
-00C7CB  1  18             clc          ; effectively a branch always
-00C7CC  1  90 BA          bcc  read256
-00C7CE  1               
-00C7CE  1               ;macro for string with high-bit set
-00C7CE  1               .macro aschi str
-00C7CE  1               .repeat .strlen (str), c
-00C7CE  1               .byte .strat (str, c) | $80
-00C7CE  1               .endrep
-00C7CE  1               .endmacro
-00C7CE  1               
-00C7CE  1  D2 CF CD AD  text:   aschi   "ROM-Drive (c)1998-2022 Terence J. Boldt"
-00C7D2  1  C4 F2 E9 F6  
-00C7D6  1  E5 A0 A8 E3  
-00C7DA  1  A9 B1 B9 B9  
-00C7DE  1  B8 AD B2 B0  
-00C7E2  1  B2 B2 A0 D4  
-00C7E6  1  E5 F2 E5 EE  
-00C7EA  1  E3 E5 A0 CA  
-00C7EE  1  AE A0 C2 EF  
-00C7F2  1  EC E4 F4     
-00C7F5  1               end:
-00C7F5  1  00           .byte	 0
-00C7F6  1               
-00C7F6  1               ; These bytes need to be at the top of the 256 byte firmware as ProDOS
-00C7F6  1               ; uses these to find the entry point and drive capabilities
-00C7F6  1               
-00C7F6  1  00 00 00 00  .repeat	251-<end
-00C7FA  1  00 00        
+00C77E  1  0A             asl  a    ;
+00C77F  1  85 FE          sta lowLatch
+00C781  1  A9 02          lda  #$02
+00C783  1  85 FD          sta  blockHalfCounter
+00C785  1  A9 C0          lda #$C0
+00C787  1  85 FB          sta ioAddressHi
+00C789  1               
+00C789  1               ;This gets 256 bytes from the ROM card
+00C789  1               
+00C789  1               read256:
+00C789  1  A0 00          ldy  #$00
+00C78B  1               loop256:
+00C78B  1  A5 FE          lda  lowLatch
+00C78D  1  9D 80 C0       sta  writeLatchLow,x
+00C790  1  8A             txa
+00C791  1  09 80          ora  #$80
+00C793  1  85 FA          sta  ioAddressLo
+00C795  1               
+00C795  1               loop16:
+00C795  1  84 FC          sty  tempY
+00C797  1  A0 00          ldy  #$00
+00C799  1  B1 FA          lda  (ioAddressLo),y
+00C79B  1  A4 FC          ldy  tempY
+00C79D  1  91 44          sta  (buflo),y
+00C79F  1  C8             iny
+00C7A0  1  E6 FA          inc  ioAddressLo
+00C7A2  1  A5 FA          lda  ioAddressLo
+00C7A4  1  29 0F          and  #$0F
+00C7A6  1  D0 ED          bne  loop16
+00C7A8  1               
+00C7A8  1               continue256:
+00C7A8  1  E6 FE          inc  lowLatch
+00C7AA  1  C0 00          cpy  #$00
+00C7AC  1  D0 DD          bne  loop256
+00C7AE  1  C6 FD          dec  blockHalfCounter
+00C7B0  1  D0 18          bne  readnext256
+00C7B2  1               
+00C7B2  1               finish:
+00C7B2  1  68             pla
+00C7B3  1  85 FF          sta highLatch
+00C7B5  1  68             pla
+00C7B6  1  85 FE          sta lowLatch
+00C7B8  1  68             pla
+00C7B9  1  85 FD          sta blockHalfCounter
+00C7BB  1  68             pla
+00C7BC  1  85 FC          sta tempY
+00C7BE  1  68             pla
+00C7BF  1  85 FB          sta ioAddressHi
+00C7C1  1  68             pla
+00C7C2  1  85 FA          sta ioAddressLo
+00C7C4  1               
+00C7C4  1  C6 45          dec  bufhi
+00C7C6  1  18             clc       ;clear error code for success
+00C7C7  1  A9 00          lda  #$00
+00C7C9  1  60             rts
+00C7CA  1               
+00C7CA  1               readnext256:
+00C7CA  1  E6 45          inc  bufhi   ; set buffer to receive next 256 bytes
+00C7CC  1  18             clc          ; effectively a branch always
+00C7CD  1  90 BA          bcc  read256
+00C7CF  1               
+00C7CF  1               ;macro for string with high-bit set
+00C7CF  1               .macro aschi str
+00C7CF  1               .repeat .strlen (str), c
+00C7CF  1               .byte .strat (str, c) | $80
+00C7CF  1               .endrep
+00C7CF  1               .endmacro
+00C7CF  1               
+00C7CF  1  D2 CF CD AD  text:   aschi   "ROM-Drive (c)1998-2022 Terence J. Boldt"
+00C7D3  1  C4 F2 E9 F6  
+00C7D7  1  E5 A0 A8 E3  
+00C7DB  1  A9 B1 B9 B9  
+00C7DF  1  B8 AD B2 B0  
+00C7E3  1  B2 B2 A0 D4  
+00C7E7  1  E5 F2 E5 EE  
+00C7EB  1  E3 E5 A0 CA  
+00C7EF  1  AE A0 C2 EF  
+00C7F3  1  EC E4 F4     
+00C7F6  1               end:
+00C7F6  1  00           .byte	 0
+00C7F7  1               
+00C7F7  1               ; These bytes need to be at the top of the 256 byte firmware as ProDOS
+00C7F7  1               ; uses these to find the entry point and drive capabilities
+00C7F7  1               
+00C7F7  1  00 00 00 00  .repeat	251-<end
+00C7FB  1  00           
 00C7FC  1               .byte 0
 00C7FC  1               .endrepeat
 00C7FC  1               
 00C7FC  1  00 00        .byte   0,0  ;0000 blocks = check status
 00C7FE  1  03           .byte   3    ;bit 0=read 1=status
-00C7FF  1  34           .byte  <entry ;low byte of entry
+00C7FF  1  3E           .byte  <entry ;low byte of entry
 00C7FF  1               
diff --git a/Firmware/GamesWithFirmware.po b/Firmware/GamesWithFirmware.po
index c304f33..108ce68 100755
Binary files a/Firmware/GamesWithFirmware.po and b/Firmware/GamesWithFirmware.po differ