{ "Warning" "WQCU_PARALLEL_NO_LICENSE" "" "Parallel compilation is not licensed and has been disabled" { } { } 0 20028 "Parallel compilation is not licensed and has been disabled" 0 0 "Fitter" 0 -1 1611862636770 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1611862636827 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1611862636827 ""}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" { } { } 0 171004 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "Fitter" 0 -1 1611862636909 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1611862636923 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Device EPM240T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1611862637106 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100A5 " "Device EPM240T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1611862637106 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Device EPM570T100C5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1611862637106 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Device EPM570T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1611862637106 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100A5 " "Device EPM570T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1611862637106 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1611862637106 ""}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "DRCLK " "Node: DRCLK was determined to be a clock but was found without an associated clock assignment." { } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Fitter" 0 -1 1611862637232 "|RAM2E|DRCLK"}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "ARCLK " "Node: ARCLK was determined to be a clock but was found without an associated clock assignment." { } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Fitter" 0 -1 1611862637232 "|RAM2E|ARCLK"}
{ "Info" "ISTA_USER_TDC_OPTIMIZATION_GOALS" "" "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" { } { } 0 332129 "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "Fitter" 0 -1 1611862637235 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "C14M Global clock in PIN 12 " "Automatically promoted signal \"C14M\" to use Global clock in PIN 12" { } { { "RAM2E.v" "" { Text "C:/Users/wgfel_69wkrf3/OneDrive/Documents/GitHub/RAM2E/cpld/RAM2E.v" 8 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1611862637251 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1611862637252 ""}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" { } { } 0 186391 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0 "Fitter" 0 -1 1611862637276 ""}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Moving registers into LUTs to improve timing and density" { } { } 1 176244 "Moving registers into LUTs to improve timing and density" 1 0 "Fitter" 0 -1 1611862637277 ""}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_DELAY_ADDED_FOR_HOLD" "4e+01 ns 2.6% " "4e+01 ns of routing delay (approximately 2.6% of available device routing delay) has been added to meet hold timing. For more information, refer to the Estimated Delay Added for Hold Timing section in the Fitter report." { } { } 0 170089 "%1!s! of routing delay (approximately %2!s! of available device routing delay) has been added to meet hold timing. For more information, refer to the Estimated Delay Added for Hold Timing section in the Fitter report." 0 0 "Fitter" 0 -1 1611862638337 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "18 " "Router estimated average interconnect usage is 18% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "18 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 18% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "C:/Users/wgfel_69wkrf3/OneDrive/Documents/GitHub/RAM2E/cpld/" { { 1 { 0 "Router estimated peak interconnect usage is 18% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 11 { 0 "Router estimated peak interconnect usage is 18% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Quartus II" 0 -1 1611862638383 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1611862638383 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1611862638534 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "0.23 " "Total time spent on timing analysis during the Fitter is 0.23 seconds." { } { } 0 11888 "Total time spent on timing analysis during the Fitter is %1!s! seconds." 0 0 "Fitter" 0 -1 1611862638544 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1611862638548 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1611862638586 ""}
