RAM2GS/CPLD/RAM2GS-AGM.v
2023-08-20 07:10:11 -04:00

420 lines
15 KiB
Verilog

module RAM2GS(PHI2, MAin, CROW, Din, Dout,
nCCAS, nCRAS, nFWE, LED,
RBA, RA, RD, nRCS, RCLK, RCKE,
nRWE, nRRAS, nRCAS, RDQMH, RDQML);
/* 65816 Phase 2 Clock */
input PHI2;
/* Async. DRAM Control Inputs */
input nCCAS, nCRAS;
/* Synchronized PHI2 and DRAM signals */
reg PHI2r, PHI2r2, PHI2r3;
reg RASr, RASr2, RASr3;
reg CASr, CASr2, CASr3;
reg FWEr;
reg CBR;
/* Activity LED */
reg LEDEN = 0;
output LED;
assign LED = !(!nCRAS && !CBR && LEDEN);
/* 65816 Data */
input [7:0] Din;
output [7:0] Dout;
assign Dout[7:0] = RD[7:0];
/* Latched 65816 Bank Address */
reg [7:0] Bank;
/* Async. DRAM Address Bus */
input [1:0] CROW;
input [9:0] MAin;
input nFWE;
reg n8MEGEN = 0;
reg XOR8MEG = 0;
/* SDRAM Clock */
input RCLK;
/* SDRAM */
reg RCKEEN;
output reg RCKE = 0;
output reg nRCS = 1, nRRAS = 1, nRCAS = 1, nRWE = 1;
output reg [1:0] RBA;
reg nRowColSel;
reg RA11;
reg RA10;
reg [9:0] RowA;
output [11:0] RA;
assign RA[11] = RA11;
assign RA[10] = RA10;
assign RA[9:0] = ~nRowColSel ? RowA[9:0] : MAin[9:0];
output RDQML, RDQMH;
assign RDQML = ~nRowColSel ? 1'b1 : ~MAin[9];
assign RDQMH = ~nRowColSel ? 1'b1 : MAin[9];
reg [7:0] WRD;
inout [7:0] RD;
assign RD[7:0] = (~nCCAS & ~nFWE) ? WRD[7:0] : 8'bZ;
/* UFM Interface */
reg nUFMCS = 1;
reg UFMCLK = 0;
reg UFMSDI = 0;
wire UFMSDO;
wire UFMOsc;
alta_ufms u_alta_ufms (
.i_ufm_set (1'b1),
.i_osc_ena (1'b1),
.i_ufm_flash_csn (nUFMCS),
.i_ufm_flash_sclk (UFMCLK),
.i_ufm_flash_sdi (UFMSDI),
.o_ufm_flash_sdo (UFMSDO),
.o_osc (UFMOsc)
);
/* UFM Command Interface */
reg C1Submitted = 0;
reg ADSubmitted = 0;
reg CmdEnable = 0;
reg CmdSubmitted = 0;
reg Cmdn8MEGEN = 0;
reg CmdLEDEN = 0;
reg CmdUFMCLK = 0;
reg CmdUFMSDI = 0;
reg CmdUFMCS = 0;
wire ADWR = Bank[7:0]==8'hFB & MAin[7:0]==8'hFF & ~nFWE;
wire C1WR = Bank[7:0]==8'hFB & MAin[7:0]==8'hFE & ~nFWE;
wire CMDWR = Bank[7:0]==8'hFB & MAin[7:0]==8'hFD & ~nFWE;
/* State Counters */
reg InitReady = 0; // 1 if ready for init sequence
reg Ready = 0; // 1 if done with init sequence
reg [1:0] S = 0; // post-RAS State counter
reg [17:0] FS = 0; // Fast init state counter
reg [3:0] IS = 0; // Init state counter
/* Synchronize PHI2, RAS, CAS */
always @(posedge RCLK) begin
PHI2r <= PHI2; PHI2r2 <= PHI2r; PHI2r3 <= PHI2r2;
RASr <= ~nCRAS; RASr2 <= RASr; RASr3 <= RASr2;
CASr <= ~nCCAS; CASr2 <= CASr; CASr3 <= CASr2;
end
/* Latch 65816 bank when PHI2 rises */
always @(posedge PHI2) begin
if (Ready) RA11 <= (Din[6] & ~n8MEGEN) ^ XOR8MEG; // Set RA11
else RA11 <= 1'b0; // Reserved in mode register
Bank[7:0] <= Din[7:0]; // Latch bank
end
/* Latch bank address, row address, WE, and CAS when RAS falls */
always @(negedge nCRAS) begin
if (Ready) begin
RBA[1:0] <= CROW[1:0];
RowA[9:0] <= MAin[9:0];
end else begin
RBA[1:0] <= 2'b00; // Reserved in mode register
RowA[9] <= 1'b1; // "1" for single write mode
RowA[8] <= 1'b0; // Reserved
RowA[7] <= 1'b0; // "0" for not test mode
RowA[6:4] <= 3'b010; // "2" for CAS latency 2
RowA[3] <= 1'b0; // "0" for sequential burst (not used)
RowA[2:0] <= 3'b000; // "0" for burst length 1 (no burst)
end
FWEr <= ~nFWE;
CBR <= ~nCCAS;
end
/* Latch write data when CAS falls */
always @(negedge nCCAS) begin
WRD[7:0] <= Din[7:0];
end
/* State counter from RAS */
always @(posedge RCLK) begin
if (~RASr2) S <= 0;
else if (S==2'h3) S <= 2'h3;
else S <= S+2'h1;
end
/* Init state counter */
always @(posedge RCLK) begin
// Wait ~4.178ms (at 62.5 MHz) before starting init sequence
FS <= FS+18'h1;
if (FS[17:10] == 8'hFF) InitReady <= 1'b1;
end
/* SDRAM CKE */
always @(posedge RCLK) begin
// Only 1 LUT4 allowed for this function!
RCKE <= ((RASr | RASr2) & RCKEEN) | (~RASr2 & RASr3);
end
/* SDRAM command */
always @(posedge RCLK) begin
if (Ready) begin
if (S==0) begin
if (RASr2) begin
if (CBR) begin
// AREF
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b0;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end else begin
// ACT
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // Bank RA10 consistently "1"
end
// Enable clock only for reads
RCKEEN <= ~CBR & ~FWEr;
end else if (RCKE) begin
// PCall
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b1;
nRWE <= 1'b0;
RA10 <= 1'b1; // "all"
RCKEEN <= 1'b1;
end else begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
RCKEEN <= 1'b1;
end
nRowColSel <= 1'b0; // Select registered row addres
end else if (S==1) begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
nRowColSel <= 1'b1; // Select asynchronous column address
RCKEEN <= ~CBR; // Disable clock if refresh cycle
end else if (S==2) begin
if (~FWEr & ~CBR) begin
// RD
nRCS <= 1'b0;
nRRAS <= 1'b1;
nRCAS <= 1'b0;
nRWE <= 1'b1;
RA10 <= 1'b1; // Auto-precharge
end else begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end
nRowColSel <= 1'b1; // Select asynchronous column address
RCKEEN <= ~CBR & FWEr; // Enable clock only for writes
end else if (S==3) begin
if (CASr2 & ~CASr3 & ~CBR & FWEr) begin
// WR
nRCS <= 1'b0;
nRRAS <= 1'b1;
nRCAS <= 1'b0;
nRWE <= 1'b0;
RA10 <= 1'b1; // Auto-precharge
end else begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end
nRowColSel <= ~(~FWEr | CASr3 | CBR);
RCKEEN <= ~(~FWEr | CASr2 | CBR);
end
end else if (InitReady) begin
if (S==0 & RASr2) begin
if (IS==0) begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end else if (IS==1) begin
// PC all
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b1;
nRWE <= 1'b0;
RA10 <= 1'b1; // "all"
end else if (IS==9) begin
// Load mode register
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b0;
nRWE <= 1'b0;
RA10 <= 1'b0; // Reserved in mode register
end else begin
// AREF
nRCS <= 1'b0;
nRRAS <= 1'b0;
nRCAS <= 1'b0;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end
IS <= IS+4'h1;
end else begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
end
if (S==3 & ~RASr2 & IS==15) Ready <= 1'b1;
nRowColSel <= 1'b0; // Select registered row address
RCKEEN <= 1'b1;
end else begin
// NOP
nRCS <= 1'b1;
nRRAS <= 1'b1;
nRCAS <= 1'b1;
nRWE <= 1'b1;
RA10 <= 1'b1; // RA10 is don't care
nRowColSel <= 1'b0; // Select registered row address
RCKEEN <= 1'b0;
end
end
/* Submit command when PHI2 falls */
always @(negedge PHI2) begin
// Magic number check
if (C1WR & Din[7:0]==8'hC1) begin // "C1" magic number
if (ADSubmitted) begin
CmdEnable <= 1'b1;
end
C1Submitted <= 1'b1;
ADSubmitted <= 1'b0;
end else if (ADWR & Din[7:0]==8'hAD) begin // "AD" magic number
if (C1Submitted) begin
CmdEnable <= 1'b1;
end
ADSubmitted <= 1'b1;
C1Submitted <= 1'b0;
end else if (C1WR | ADWR) begin // wrong magic number submitted
CmdEnable <= 1'b0;
C1Submitted <= 1'b0;
ADSubmitted <= 1'b0;
end else if (CMDWR) CmdEnable <= 1'b0;
// Submit command
if (CMDWR & CmdEnable) begin
// if (Din[7:4]==4'h0 && Din[3:2]==2'b00) begin // MAX w/LED
// if (Din[7:4]==4'h0) begin // MAX w/o LED
if (Din[7:4]==4'h0 && Din[3:2]==2'b01) begin // LCMXO / iCE40 / AGM
// if (Din[7:4]==4'h0 && Din[3:2]==2'b10) begin // LCMXO2
XOR8MEG <= Din[0] && !(LEDEN && Din[1]);
end else if (Din[7:4]==4'h0) begin // Unsupported type
XOR8MEG <= 0;
end else if (Din[7:4]==4'h1) begin
CmdLEDEN <= Din[1];
Cmdn8MEGEN <= ~Din[0];
CmdSubmitted <= 1'b1;
end else if (Din[7:4]==4'h2) begin
// Reserved for MAX commands
end else if (Din[7:4]==4'h3 && !Din[3]) begin
// SPI (LCMXO, iCE40, AGM) commands
CmdLEDEN <= LEDEN;
Cmdn8MEGEN <= n8MEGEN;
CmdUFMCS <= Din[2];
CmdUFMCLK <= Din[1];
CmdUFMSDI <= Din[0];
CmdSubmitted <= 1'b1;
end else if (Din[7:4]==4'h3 && Din[3]) begin
// Reserved for LCMXO2 commands
// Din[1] - Shift when high, execute when low
// Din[0] - Shift data
end
end
end
/* UFM Control */
always @(posedge RCLK) begin
if (~InitReady && FS[17:10]==8'h00) begin
nUFMCS <= 1'b1;
UFMCLK <= 1'b0;
UFMSDI <= 1'b0;
end else if (~InitReady && FS[17:10]==8'h01) begin
nUFMCS <= 1'b0;
UFMCLK <= 1'b0;
UFMSDI <= 1'b0;
end else if (~InitReady && FS[17:10]==8'h02) begin
nUFMCS <= 1'b0;
UFMCLK <= FS[4];
case (FS[9:5]) // Shift out read data command (0x03)
5'h00: UFMSDI <= 1'b0; // command bit 7 (0)
5'h01: UFMSDI <= 1'b0; // command bit 6 (0)
5'h02: UFMSDI <= 1'b0; // command bit 5 (0)
5'h03: UFMSDI <= 1'b0; // command bit 4 (0)
5'h04: UFMSDI <= 1'b0; // command bit 3 (0)
5'h05: UFMSDI <= 1'b0; // command bit 2 (0)
5'h06: UFMSDI <= 1'b1; // command bit 1 (1)
5'h07: UFMSDI <= 1'b1; // command bit 0 (1)
5'h08: UFMSDI <= 1'b0; // address bit 23 (0)
5'h09: UFMSDI <= 1'b0; // address bit 22 (0)
5'h0A: UFMSDI <= 1'b0; // address bit 21 (0)
5'h0B: UFMSDI <= 1'b0; // address bit 20 (0)
5'h0C: UFMSDI <= 1'b0; // address bit 19 (0)
5'h0D: UFMSDI <= 1'b0; // address bit 18 (0)
5'h0E: UFMSDI <= 1'b0; // address bit 17 (0)
5'h0F: UFMSDI <= 1'b0; // address bit 16 (0)
5'h10: UFMSDI <= 1'b0; // address bit 15 (0)
5'h11: UFMSDI <= 1'b0; // address bit 14 (0)
5'h12: UFMSDI <= 1'b0; // address bit 13 (0)
5'h13: UFMSDI <= 1'b1; // address bit 12 (0)
5'h14: UFMSDI <= 1'b0; // address bit 11 (0)
5'h15: UFMSDI <= 1'b0; // address bit 10 (0)
5'h16: UFMSDI <= 1'b0; // address bit 09 (0)
5'h17: UFMSDI <= 1'b0; // address bit 08 (0)
5'h18: UFMSDI <= 1'b0; // address bit 07 (0)
5'h19: UFMSDI <= 1'b0; // address bit 06 (0)
5'h1A: UFMSDI <= 1'b0; // address bit 05 (0)
5'h1B: UFMSDI <= 1'b0; // address bit 04 (0)
5'h1C: UFMSDI <= 1'b0; // address bit 03 (0)
5'h1D: UFMSDI <= 1'b0; // address bit 02 (0)
5'h1E: UFMSDI <= 1'b0; // address bit 01 (0)
5'h1F: UFMSDI <= 1'b0; // address bit 00 (0)
endcase
end else if (~InitReady && FS[17:10]==8'h03) begin
nUFMCS <= 1'b0;
UFMCLK <= FS[4];
UFMSDI <= 1'b0;
// Latch n8MEGEN and LEDEN
if (FS[9:5]==5'h00 && FS[4:0]==5'h10) n8MEGEN <= ~UFMSDO;
if (FS[9:5]==5'h01 && FS[4:0]==5'h10) LEDEN <= ~UFMSDO;
end else if (~InitReady && FS[17:10]!=8'hFE && FS[17:10]!=8'hFF) begin
nUFMCS <= 1'b0;
UFMCLK <= FS[1];
UFMSDI <= 1'b0;
end else if (~InitReady) begin
nUFMCS <= 1'b1;
UFMCLK <= 1'b0;
UFMSDI <= 1'b0;
end else if (~PHI2r2 & PHI2r3 & CmdSubmitted) begin
// Set user command signals after PHI2 falls
LEDEN <= CmdLEDEN;
n8MEGEN <= Cmdn8MEGEN;
nUFMCS <= ~CmdUFMCS;
UFMCLK <= CmdUFMCLK;
UFMSDI <= CmdUFMSDI;
end
end
endmodule