PC app: support for new board design

Added:
* detection of the new board design
* VPP measurement (use 'm' commands)
* setting of calibration offset (use '-co' parameter)
This commit is contained in:
ole00 2023-03-27 23:16:28 +01:00
parent 4db4108d4a
commit 7d332acae6

View File

@ -29,14 +29,7 @@ Requires:
* simple programming circuit.
Changelog:
* 2019.02.02 - initial version 0.1
* 2019.03.24 - version 0.2
- added support for Win32 and Win64 builds
- fixed serial port setup for Mac OSX
* 2019.04.09 - version 0.3
- fixed error detection
- 'i' command now requires GAL type to be passed
on the command line
* use 'git log'
This is the PC part that communicates with Arduino UNO by serial line.
To compile: gcc -g3 -O0 afterburner afterburner.c
@ -48,13 +41,14 @@ To compile: gcc -g3 -O0 afterburner afterburner.c
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdint.h>
#include "serial_port.h"
#define VERSION "v.0.4.2"
#define VERSION "v.0.5.1"
#define MAX_LINE 200
#define MAX_LINE 1024
#define MAXFUSES 10000
#define GALBUFSIZE 16384
@ -111,6 +105,10 @@ unsigned short checksum;
char galbuffer[GALBUFSIZE];
char fusemap[MAXFUSES];
char noGalCheck = 0;
char varVppExists = 0;
char printSerialWhileWaiting = 0;
int calOffset = 0xFFFF; //calibration offset is not applied
char enableSecurity = 0;
char opRead = 0;
char opWrite = 0;
@ -118,6 +116,8 @@ char opErase = 0;
char opInfo = 0;
char opVerify = 0;
char opTestVPP = 0;
char opCalibrateVPP = 0;
char opMeasureVPP = 0;
char opSecureGal = 0;
char opWritePes = 0;
char flagEnableApd = 0;
@ -132,15 +132,17 @@ static void printHelp() {
printf("Afterburner " VERSION " a GAL programming tool for Arduino based programmer\n");
printf("more info: https://github.com/ole00/afterburner\n");
printf("usage: afterburner command(s) [options]\n");
printf("commands: ierwvs\n");
printf("commands: ierwvsbm\n");
printf(" i : read device info and programming voltage\n");
printf(" r : read fuse map from the GAL chip and display it, -t option must be set\n");
printf(" w : write fuse map, -f and -t options must be set\n");
printf(" v : verify fuse map, -f and -t options must be set\n");
printf(" e : erase the GAL chip, -t option must be set. Optionally '-all' can be set.\n");
printf(" p : write PES. -t and -pes options must be set. GAL must be erased with '-all' option.\n");
printf(" s : sets VPP ON to check the programming voltage. Ensure the GAL is NOT inserted.\n");
printf("options:\n");
printf(" s : set VPP ON to check the programming voltage. Ensure the GAL is NOT inserted.\n");
printf(" b : calibrate variable VPP on new board designs. Ensure the GAL is NOT inserted.\n");
printf(" m : measure variable VPP on new board designs. Ensure the GAL is NOT inserted.\n");
printf("options:\n");
printf(" -v : verbose mode\n");
printf(" -t <gal_type> : the GAL type. use GAL16V8 GAL20V8 GAL22V10 ATF16V8B ATF22V10B ATF22V10C\n");
printf(" -f <file> : JEDEC fuse map file\n");
@ -148,6 +150,7 @@ static void printHelp() {
printf(" serial params are: 38400, 8N1\n");
printf(" -nc : do not check device GAL type before operation: force the GAL type set on command line\n");
printf(" -sec: enable security - protect the chip. Use with 'w' or 'v' commands.\n");
printf(" -co <offset>: Set calibration offset. Use with 'b' command. Value: -20 (-0.2V) to 25 (+0.25V)\n");
printf(" -all: use with 'e' command to erase all data including PES.\n");
printf(" -pes <PES> : use with 'p' command to specify new PES. PES format is 8 hex bytes with a delimiter.\n");
printf(" For example 00:03:3A:A1:00:00:00:90\n");
@ -168,7 +171,7 @@ static void printHelp() {
static int8_t verifyArgs(char* type) {
if (!opRead && !opWrite && !opErase && !opInfo && !opVerify && !opTestVPP && !opWritePes) {
if (!opRead && !opWrite && !opErase && !opInfo && !opVerify && !opTestVPP && !opCalibrateVPP && !opMeasureVPP && !opWritePes) {
printHelp();
printf("Error: no command specified.\n");
return -1;
@ -181,7 +184,7 @@ static int8_t verifyArgs(char* type) {
printf("Error: invalid command combination. Use 'Erase all' in a separate step\n");
return -1;
}
if ((opRead || opWrite || opVerify) && (opTestVPP)) {
if ((opRead || opWrite || opVerify) && (opTestVPP || opCalibrateVPP || opMeasureVPP)) {
printf("Error: VPP functions can not be conbined with read/write/verify operations\n");
return -1;
}
@ -249,11 +252,22 @@ static int8_t checkArgs(int argc, char** argv) {
} else if (strcmp("-pes", param) == 0) {
i++;
pesString = argv[i];
} else if (strcmp("-co", param) == 0) {
i++;
calOffset = atoi(argv[i]);
if (calOffset < -20 || calOffset > 25) {
printf("Calibration offset out of range (-20..25 inclusive).\n");
}
}
else if (param[0] != '-') {
modes = param;
}
}
if (calOffset < -20) {
calOffset = -20;
} else if (calOffset > 25) {
calOffset = 25;
}
i = 0;
while (modes != 0 && modes[i] != 0) {
@ -276,7 +290,12 @@ static int8_t checkArgs(int argc, char** argv) {
case 's':
opTestVPP = 1;
break;
case 'b':
opCalibrateVPP = 1;
break;
case 'm':
opMeasureVPP = 1;
break;
case 'p':
opWritePes = 1;
break;
@ -553,6 +572,14 @@ static int openSerial(void) {
labelPos = strstr(buf, "AFTerburner v.") - buf;
if (labelPos >= 0 && labelPos < 500 && buf[total - 3] == '>') {
// check for new board desgin: variable VPP
labelPos = strstr(buf + labelPos, " varVpp ") - buf;
if (labelPos > 0 && labelPos < 500) {
if (verbose) {
printf("variable VPP board detected\n");
}
varVppExists = 1;
}
//all OK
return 0;
}
@ -630,12 +657,32 @@ static char* findLastLine(char* buf) {
return result;
}
static char* printBuffer(char* bufPrint, int readSize) {
int i;
char doPrint = 1;
for (i = 0; i < readSize;i++) {
if (*bufPrint == '>') {
doPrint = 0;
}
if (doPrint) {
printf("%c", *bufPrint);
if (*bufPrint == '\n' || *bufPrint == '\r') {
fflush(stdout);
}
bufPrint++;
}
}
return bufPrint;
}
static int waitForSerialPrompt(char* buf, int bufSize, int maxDelay) {
char* bufStart = buf;
int bufTotal = bufSize;
int bufPos = 0;
int readSize;
char* bufPrint = buf;
char doPrint = printSerialWhileWaiting;
memset(buf, 0, bufSize);
while (maxDelay > 0) {
@ -648,6 +695,9 @@ static int waitForSerialPrompt(char* buf, int bufSize, int maxDelay) {
buf += readSize;
bufSize -= readSize;
}
if (printSerialWhileWaiting) {
bufPrint = printBuffer(bufPrint, readSize);
}
}
if (maxDelay > 0) {
/* WIN_API handles timeout itself */
@ -793,7 +843,7 @@ static char sendGenericCommand(const char* command, const char* errorText, int m
if (lastLine == 0 || (lastLine[0] == 'E' && lastLine[1] == 'R')) {
printf("%s\n", response);
return -1;
} else if (printResult) {
} else if (printResult && printSerialWhileWaiting == 0) {
printf("%s\n", response);
}
}
@ -879,14 +929,73 @@ static char operationTestVpp(void) {
if (verbose) {
printf("sending 't' command...\n");
}
printf("Turn the Pot on the MT3608 module to check / set the VPP\n");
if (varVppExists) {
printf("Turn the Pot on the MT3608 module to set the VPP to 16.5V (+/- 0.05V)\n");
} else {
printf("Turn the Pot on the MT3608 module to check / set the VPP\n");
}
//print the measured voltages if the feature is available
printSerialWhileWaiting = 1;
//Voltage testing takes ~20 seconds
result = sendGenericCommand("t\r", "info failed ?", 22000, 1);
printSerialWhileWaiting = 0;
closeSerial();
return result;
}
static char operationCalibrateVpp(void) {
char result;
if (openSerial() != 0) {
return -1;
}
if (calOffset != 0xFFFF) {
char cmd [8] = {0};
char val = (char)('0' + (calOffset + 20) / 5);
sprintf(cmd, "B%c\r", val);
if (verbose) {
printf("sending 'B%c' command...\n", val);
}
result = sendGenericCommand(cmd, "VPP cal. offset failed", 4000, 1);
}
if (verbose) {
printf("sending 'b' command...\n");
}
printf("VPP voltages are scanned - this might take a while...\n");
printSerialWhileWaiting = 1;
result = sendGenericCommand("b\r", "VPP calibration failed", 16000, 1);
printSerialWhileWaiting = 0;
closeSerial();
return result;
}
static char operationMeasureVpp(void) {
char result;
if (openSerial() != 0) {
return -1;
}
if (verbose) {
printf("sending 'm' command...\n");
}
//print the measured voltages if the feature is available
printSerialWhileWaiting = 1;
result = sendGenericCommand("m\r", "VPP measurement failed", 22000, 1);
printSerialWhileWaiting = 0;
closeSerial();
return result;
}
static char operationSetGalCheck(void) {
int readSize;
char result;
@ -1075,6 +1184,15 @@ int main(int argc, char** argv) {
operationSecureGal();
}
}
//variable VPP functions (for new board designs)
if (varVppExists) {
if (0 == result && opCalibrateVPP) {
result = operationCalibrateVpp();
}
if (0 == result && opMeasureVPP) {
result = operationMeasureVpp();
}
}
}
if (verbose) {