From d2e11f1008b7f13fa0ed4b0b233e4885e92727a3 Mon Sep 17 00:00:00 2001 From: ole00 Date: Tue, 9 Apr 2019 22:49:47 +0100 Subject: [PATCH] updated README.md clarity --- README.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index f353b77..4562949 100644 --- a/README.md +++ b/README.md @@ -123,10 +123,9 @@ build, then you have several options. afterburner_etch_1200dpi_bot.png file to transfer the design to the copper board. * It's a single sided design, but you'll have to patch 3 - traces. See the the silk screen image, 2 short patch wires are indicated - in the top left corner, the last one slightly longer is in located - between hole C1+ and hole VIN+. Do not connect these 2 holes, just look - for the horizontal line indicated on the silkscreen. + traces. See the the combined image where the patch traces are highlighted + in blue color. Two short patch wires are located near the top left corner, + the last one, slightly longer, is located underneath the MT3608 module. * Resistors are not through hole but smt 1206 package to reduce drilling. * The copper is on the bottom side, to make it easy to solder the socket and capacitors. However, that makes it a bit complicated to solder the Arduino