Commit Graph

33 Commits

Author SHA1 Message Date
ole00
5f2105680f PC app: increase maximum wait time for operations
This fixes reading erased ATF750C when using sparse fusemap.
2024-02-16 19:44:52 +00:00
ole00
053c914fae PC app: increase buffer sizes to fit ATF750C data 2024-02-16 19:44:52 +00:00
ole00
7ff02e0a8d pc app: wait a bit longer when processing fuses 2024-02-16 19:44:52 +00:00
ole00
b216b16c9a Initial support for ATF750C based on nospam2000 fork
Setup and PES reading works.

Based on fork: https://github.com/nospam2000/afterburner
By Michael D. - nospam2000
2024-02-16 19:44:48 +00:00
ole00
28c4a104d1 version increased to 0.5.6 2024-02-04 11:26:07 +00:00
HubertH
8ae5b495f8 Fixed B9 command bug
Fixed: Command 'B9' (Calibration Offset = 0,25V) doesn't work
Note: Also requires elimination of a bug in the PC program afterburner.ino
Added: Sending B4, if b /wo -co is executed
2024-02-04 11:13:47 +00:00
ole00
24494accde version increased to 0.5.5 2023-11-22 21:39:05 +00:00
rhgndf
5c2cd50d47 Support GAL20RA10 2023-11-22 12:30:52 +08:00
rhgndf
8cbc013e68 Fix incorrect fuse uploading 2023-11-21 16:33:31 +08:00
rhgndf
2275e13091 Fix upload and 26v12 bits 2023-11-05 13:39:53 +08:00
rhgndf
b60f36b144 Support 26(C)V12 2023-11-05 13:39:51 +08:00
ole00
7944dbf2c1 PC App: fix gal type, take 3 2023-11-04 14:32:03 +00:00
ole00
f63ae40bb4 PC App: fix gal type, take 2
Thanks rhgndf for pointing that out!
2023-11-04 14:28:23 +00:00
ole00
95e461233e
Merge branch 'master' into atf20v8 2023-11-04 14:00:49 +00:00
ole00
08e3cea5c7 PC App: fix gal type
Now, the MCU code can decode more than 9 gal types.
2023-11-04 12:16:00 +00:00
rhgndf
ab9fa88437 Support ATF20V8B 2023-10-30 22:13:25 +08:00
rhgndf
b160a49601 Initial GAL18V10 support 2023-10-30 16:47:27 +08:00
ole00
b498bc73f3 PC app: fix prompt detection.
It should improve detection of Afterburner presence during start.
2023-10-14 21:15:39 +01:00
ole00
8b82d0ea0e Increased version to 0.5.3 2023-10-02 22:41:13 +01:00
rhgndf
39b27c3cac Add progress bar for uploading fuses 2023-10-02 00:03:49 +08:00
rhgndf
7b08a1a749 Initial GAL6001/GAL6002 support 2023-09-22 23:32:15 +08:00
rhgndf
4145612445 Do not match unknown gal 2023-09-17 12:20:15 +08:00
rhgndf
82b6691bba Support GAL20XV10 2023-09-17 12:20:08 +08:00
ole00
7d332acae6 PC app: support for new board design
Added:
* detection of the new board design
* VPP measurement (use 'm' commands)
* setting of calibration offset (use '-co' parameter)
2023-04-07 19:16:41 +01:00
ole00
1a3a009885 PC app: added support for erase-all and write-pes commands 2023-03-30 23:34:23 +01:00
ole00
e9d005213e Added support for Power-Down pin on ATF16V8C
The PD feature is now selectively enabled or disabled based
on the JED contents. Also, when fuses are read the printout
of the JED file reflects the PD fuse bit state. So, when
the PD fuse bit is enabled then the JED file contains an extra
fuse bit set to 1. The ATF22V10C now behaves the same way regarding
the PD fuse bit (previously Afterburner always disabled the PD
function).

credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
317b3520d8 Added support for securing/protecting the GAL
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
ffa637eb8e PC app: lunx serial port read tweak
This change seems to fix a weird issue where some of the lines were split
in two lines. This could be reproduced when using 'i' command with ATF22V10C
or ATF16V8B repeatedly.
2023-03-21 23:23:24 +00:00
ole00
39fe8258db help: changed the afterburner's url 2022-04-22 19:54:32 +01:00
ole00
d518805925 serial port: support for keeping the port always opened
Closing serial port causes Arduino reset on Mac OSX.
2022-04-22 19:49:58 +01:00
ole00
b5d6fa6683 version 0.4 - baud rate changed to 57600. Please re-upload .ino sketch.
After testing with genuine arduino uno I could not make
it to work reliably using the original baudrate 38400 on
Windows 7. Linux worked OK, but Windows 7 inserted extra 2
bytes 0xFE or 0xFF at the beginnig of the serial communication
(at least that's what arduino read from the serial line).
Baudrate 57600 so far had no issue, another reliable option
seem to be 9600.
2022-04-01 22:15:48 +01:00
ole00
443072e423 pc app: fixed detection of serial prompt 2022-04-01 17:49:09 +01:00
ole00
935d52e12b moved the PC app source to the src_pc directory
This fixes an issue with Arduino IDE which opens all .c files
(even unrelated) in the same directory when the .ino file is opened.
Fixes compilation error described in issue #10
2021-06-22 19:53:40 +01:00