aiie/apple/hd32.cpp
2020-07-04 07:42:32 -04:00

276 lines
5.5 KiB
C++

#include "hd32.h"
/* AppleWin 32-MB hard drive emulation.
*
* cf. https://github.com/AppleWin/AppleWin/tree/master/firmware/HDD
*
*
* General interface is outlined in
* https://github.com/AppleWin/AppleWin/blob/master/source/Harddisk.cpp
*/
#ifdef TEENSYDUINO
#include <Arduino.h>
#include "teensy-println.h"
#else
#include <unistd.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <errno.h>
#endif
#include "applemmu.h" // for FLOATING
#include "globals.h"
#include "hd32-rom.h"
#define DEVICE_OK 0x00
#define DEVICE_UNKNOWN_ERROR 0x28
#define DEVICE_IO_ERROR 0x27
// Switches...
#define HD32_EXEC_RETSTAT 0x0
#define HD32_STATUS 0x1
#define HD32_COMMAND 0x2
#define HD32_UNITNUM 0x3
#define HD32_LBBUF 0x4
#define HD32_HBBUF 0x5
#define HD32_LBBLOCKNUM 0x6
#define HD32_HBBLOCKNUM 0x7
#define HD32_NEXTBYTE 0x8
// Commands
#define CMD_STATUS 0x0
#define CMD_READ 0x1
#define CMD_WRITE 0x2
#define CMD_FORMAT 0x3
HD32::HD32(AppleMMU *mmu)
{
this->mmu = mmu;
Reset();
}
HD32::~HD32()
{
}
bool HD32::Serialize(int8_t fd)
{
return true;
}
bool HD32::Deserialize(int8_t fd)
{
return true;
}
void HD32::Reset()
{
enabled = 1;
fd[0] = fd[1] = -1;
errorState[0] = errorState[1] = 0;
memBlock[0] = memBlock[1] = 0;
diskBlock[0] = diskBlock[1] = 0;
driveSelected = 0;
command = CMD_STATUS;
}
uint8_t HD32::readSwitches(uint8_t s)
{
uint8_t ret = DEVICE_OK;
if (!enabled)
return DEVICE_IO_ERROR;
switch (s) {
case HD32_EXEC_RETSTAT:
switch (command) {
case CMD_STATUS:
// set ret to DEVICE_IO_ERROR & set error state=true if no image loaded
if (fd[driveSelected] == -1) {
// Nothing inserted
ret = DEVICE_IO_ERROR;
errorState[driveSelected] = 1;
} else {
ret = DEVICE_OK;
errorState[driveSelected] = 0;
}
break;
case CMD_READ:
// FIXME: if diskblock[selectedDrive] >= disk image size, set/return io error
errorState[driveSelected] = 0;
ret = DEVICE_OK;
cursor[driveSelected] = diskBlock[driveSelected] * 512; // sectors are 512 bytes
break;
case CMD_WRITE:
// FIXME: if diskblock[selectedDrive] >= disk image size, set/return io error
if (!writeBlockToSelectedDrive()){
ret = DEVICE_IO_ERROR;
errorState[driveSelected] = 1;
}
break;
case CMD_FORMAT:
// Currently ignored. FIXME: make this zero out a 32MB file?
break;
default:
errorState[driveSelected] = 1;
ret = DEVICE_UNKNOWN_ERROR;
break;
}
break;
case HD32_STATUS:
ret = errorState[driveSelected];
break;
case HD32_COMMAND:
ret = command;
break;
case HD32_UNITNUM:
ret = unitSelected;
break;
case HD32_LBBUF:
ret = memBlock[driveSelected] & 0x00FF;
break;
case HD32_HBBUF:
ret = ((memBlock[driveSelected] & 0xFF00) >> 8);
break;
case HD32_LBBLOCKNUM:
ret = diskBlock[driveSelected] & 0x00FF;
break;
case HD32_HBBLOCKNUM:
ret = ((diskBlock[driveSelected] & 0xFF00) >> 8);
break;
case HD32_NEXTBYTE:
ret = readNextByteFromSelectedDrive();
break;
}
return ret;
}
void HD32::writeSwitches(uint8_t s, uint8_t v)
{
if (!enabled)
return;
switch (s) {
case HD32_COMMAND:
command = v;
break;
case HD32_UNITNUM:
unitSelected = v;
// FIXME: verify slot#?
driveSelected = (v & 0x80) ? 1 : 0;
break;
case HD32_LBBUF:
memBlock[driveSelected] = (memBlock[driveSelected] & 0xFF00) | v;
break;
case HD32_HBBUF:
memBlock[driveSelected] = (memBlock[driveSelected] & 0x00FF) | (v << 8);
break;
case HD32_LBBLOCKNUM:
diskBlock[driveSelected] = (diskBlock[driveSelected] & 0xFF00) | v;
break;
case HD32_HBBLOCKNUM:
diskBlock[driveSelected] = (diskBlock[driveSelected] & 0x00FF) | (v << 8);
break;
}
}
void HD32::loadROM(uint8_t *toWhere)
{
#ifdef TEENSYDUINO
println("loading HD32 rom");
for (uint16_t i=0; i<=0xFF; i++) {
toWhere[i] = pgm_read_byte(&romData[i]);
}
#else
printf("loading HD32 rom\n");
memcpy(toWhere, romData, 256);
#endif
}
uint8_t HD32::readNextByteFromSelectedDrive()
{
// FIXME: assumes file is open & cursor is valid
uint8_t v;
// FIXME: error handling
g_filemanager->lseek(fd[driveSelected], cursor[driveSelected], SEEK_SET);
g_filemanager->read(fd[driveSelected], &v, 1);
cursor[driveSelected]++;
return v;
}
bool HD32::writeBlockToSelectedDrive()
{
// FIXME: assumes file is open & cursor is valid
// FIXME: is there a better static 512-char buf somewhere we can reuse instead of allocing new? (The teensy is low on ram.)
uint8_t buf[512];
for (uint16_t i=0; i<512; i++) {
buf[i] = mmu->read(memBlock[driveSelected] + i);
}
if (g_filemanager->lseek(fd[driveSelected], diskBlock[driveSelected]*512, SEEK_SET) == -1 ||
g_filemanager->write(fd[driveSelected], buf, 512) != 512) {
// FIXME
#ifndef TEENSYDUINO
printf("ERROR: failed to write to hd file? errno %d\n", errno);
#endif
return false;
}
return true;
}
void HD32::setEnabled(uint8_t e)
{
enabled = e;
}
const char *HD32::diskName(int8_t num)
{
if (fd[num] != -1)
return g_filemanager->fileName(fd[num]);
return "";
}
void HD32::insertDisk(int8_t driveNum, const char *filename)
{
ejectDisk(driveNum);
fd[driveNum] = g_filemanager->openFile(filename);
errorState[driveNum] = 0;
enabled = 1;
}
void HD32::ejectDisk(int8_t driveNum)
{
if (fd[driveNum] != -1) {
g_filemanager->closeFile(fd[driveNum]);
fd[driveNum] = -1;
}
}