mirror of
https://github.com/JorjBauer/aiie.git
synced 2024-11-04 19:07:22 +00:00
729 lines
17 KiB
C++
729 lines
17 KiB
C++
#include "globals.h"
|
|
#include "bios.h"
|
|
|
|
#include "applevm.h"
|
|
#include "physicalkeyboard.h"
|
|
#include "physicaldisplay.h"
|
|
#include "cpu.h"
|
|
|
|
|
|
enum {
|
|
ACT_EXIT = 1,
|
|
ACT_RESET = 2,
|
|
ACT_COLDBOOT = 3,
|
|
ACT_MONITOR = 4,
|
|
ACT_DISPLAYTYPE = 5,
|
|
ACT_DEBUG = 6,
|
|
ACT_DISK1 = 7,
|
|
ACT_DISK2 = 8,
|
|
ACT_HD1 = 9,
|
|
ACT_HD2 = 10,
|
|
ACT_VOLPLUS = 11,
|
|
ACT_VOLMINUS = 12,
|
|
ACT_SUSPEND = 13,
|
|
ACT_RESTORE = 14,
|
|
ACT_PRIMODE = 15,
|
|
ACT_SPEED = 16,
|
|
};
|
|
|
|
#define NUM_TITLES 3
|
|
const char *menuTitles[NUM_TITLES] = { "VM", "Hardware", "Disks" };
|
|
const uint8_t titleWidths[NUM_TITLES] = { 28, 80, 45 };
|
|
|
|
const uint8_t vmActions[] = { ACT_EXIT, ACT_RESET, ACT_COLDBOOT, ACT_MONITOR,
|
|
ACT_DEBUG, ACT_SUSPEND, ACT_RESTORE };
|
|
const uint8_t hardwareActions[] = { ACT_DISPLAYTYPE, ACT_SPEED,
|
|
ACT_PRIMODE, ACT_VOLPLUS, ACT_VOLMINUS };
|
|
const uint8_t diskActions[] = { ACT_DISK1, ACT_DISK2,
|
|
ACT_HD1, ACT_HD2 };
|
|
|
|
#define CPUSPEED_HALF 0
|
|
#define CPUSPEED_FULL 1
|
|
#define CPUSPEED_DOUBLE 2
|
|
#define CPUSPEED_QUAD 3
|
|
|
|
// FIXME: abstract the pin # rather than repeating it here
|
|
#define RESETPIN 39
|
|
|
|
const char *staticPathConcat(const char *rootPath, const char *filePath)
|
|
{
|
|
static char buf[MAXPATH];
|
|
strncpy(buf, rootPath, sizeof(buf)-1);
|
|
strncat(buf, filePath, sizeof(buf)-strlen(buf)-1);
|
|
|
|
return buf;
|
|
}
|
|
|
|
BIOS::BIOS()
|
|
{
|
|
selectedMenu = 0;
|
|
selectedMenuItem = 0;
|
|
|
|
selectedFile = -1;
|
|
for (int8_t i=0; i<BIOS_MAXFILES; i++) {
|
|
// Put end terminators in place; strncpy won't copy over them
|
|
fileDirectory[i][BIOS_MAXPATH] = '\0';
|
|
}
|
|
}
|
|
|
|
BIOS::~BIOS()
|
|
{
|
|
}
|
|
|
|
void BIOS::DrawMenuBar()
|
|
{
|
|
uint8_t xpos = 0;
|
|
|
|
if (selectedMenu < 0) {
|
|
selectedMenu = NUM_TITLES-1;
|
|
}
|
|
selectedMenu %= NUM_TITLES;
|
|
|
|
#define XPADDING 2
|
|
|
|
for (int i=0; i<NUM_TITLES; i++) {
|
|
for (int x=0; x<titleWidths[i] + 2*XPADDING; x++) {
|
|
g_display->drawPixel(xpos+x, 0, 0xFFFF);
|
|
g_display->drawPixel(xpos+x, 16, 0xFFFF);
|
|
}
|
|
for (int y=0; y<=16; y++) {
|
|
g_display->drawPixel(xpos, y, 0xFFFF);
|
|
g_display->drawPixel(xpos + titleWidths[i] + 2*XPADDING, y, 0xFFFF);
|
|
}
|
|
|
|
xpos += XPADDING;
|
|
|
|
g_display->drawString(selectedMenu == i ? M_SELECTDISABLED : M_DISABLED,
|
|
xpos, 2, menuTitles[i]);
|
|
xpos += titleWidths[i] + XPADDING;
|
|
}
|
|
}
|
|
|
|
|
|
bool BIOS::runUntilDone()
|
|
{
|
|
g_filemanager->getRootPath(rootPath, sizeof(rootPath));
|
|
|
|
// FIXME: abstract these constant speeds
|
|
currentCPUSpeedIndex = CPUSPEED_FULL;
|
|
if (g_speed == 1023000/2)
|
|
currentCPUSpeedIndex = CPUSPEED_HALF;
|
|
if (g_speed == 1023000*2)
|
|
currentCPUSpeedIndex = CPUSPEED_DOUBLE;
|
|
if (g_speed == 1023000*4)
|
|
currentCPUSpeedIndex = CPUSPEED_QUAD;
|
|
|
|
int8_t prevAction = ACT_EXIT;
|
|
bool volumeDidChange = 0;
|
|
while (1) {
|
|
switch (prevAction = GetAction(prevAction)) {
|
|
case ACT_EXIT:
|
|
goto done;
|
|
case ACT_COLDBOOT:
|
|
ColdReboot();
|
|
goto done;
|
|
case ACT_RESET:
|
|
WarmReset();
|
|
goto done;
|
|
case ACT_MONITOR:
|
|
((AppleVM *)g_vm)->Monitor();
|
|
goto done;
|
|
case ACT_DISPLAYTYPE:
|
|
g_displayType++;
|
|
g_displayType %= 4; // FIXME: abstract max #
|
|
((AppleDisplay*)g_display)->displayTypeChanged();
|
|
break;
|
|
case ACT_SPEED:
|
|
currentCPUSpeedIndex++;
|
|
currentCPUSpeedIndex %= 4;
|
|
switch (currentCPUSpeedIndex) {
|
|
case CPUSPEED_HALF:
|
|
g_speed = 1023000/2;
|
|
break;
|
|
case CPUSPEED_DOUBLE:
|
|
g_speed = 1023000*2;
|
|
break;
|
|
case CPUSPEED_QUAD:
|
|
g_speed = 1023000*4;
|
|
break;
|
|
default:
|
|
g_speed = 1023000;
|
|
break;
|
|
}
|
|
break;
|
|
case ACT_DEBUG:
|
|
g_debugMode++;
|
|
g_debugMode %= 8; // FIXME: abstract max #
|
|
break;
|
|
case ACT_PRIMODE:
|
|
g_prioritizeDisplay = !g_prioritizeDisplay;
|
|
break;
|
|
case ACT_DISK1:
|
|
if (((AppleVM *)g_vm)->DiskName(0)[0] != '\0') {
|
|
((AppleVM *)g_vm)->ejectDisk(0);
|
|
} else {
|
|
if (SelectDiskImage()) {
|
|
((AppleVM *)g_vm)->insertDisk(0, staticPathConcat(rootPath, fileDirectory[selectedFile]), false);
|
|
goto done;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_DISK2:
|
|
if (((AppleVM *)g_vm)->DiskName(1)[0] != '\0') {
|
|
((AppleVM *)g_vm)->ejectDisk(1);
|
|
} else {
|
|
if (SelectDiskImage()) {
|
|
((AppleVM *)g_vm)->insertDisk(1, staticPathConcat(rootPath, fileDirectory[selectedFile]), false);
|
|
goto done;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_HD1:
|
|
if (((AppleVM *)g_vm)->HDName(0)[0] != '\0') {
|
|
((AppleVM *)g_vm)->ejectHD(0);
|
|
} else {
|
|
if (SelectDiskImage()) {
|
|
((AppleVM *)g_vm)->insertHD(0, staticPathConcat(rootPath, fileDirectory[selectedFile]));
|
|
goto done;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_HD2:
|
|
if (((AppleVM *)g_vm)->HDName(1)[0] != '\0') {
|
|
((AppleVM *)g_vm)->ejectHD(1);
|
|
} else {
|
|
if (SelectDiskImage()) {
|
|
((AppleVM *)g_vm)->insertHD(1, staticPathConcat(rootPath, fileDirectory[selectedFile]));
|
|
goto done;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_VOLPLUS:
|
|
g_volume ++;
|
|
if (g_volume > 15) {
|
|
g_volume = 15;
|
|
}
|
|
volumeDidChange = true;
|
|
break;
|
|
case ACT_VOLMINUS:
|
|
g_volume--;
|
|
if (g_volume < 0) {
|
|
g_volume = 0;
|
|
}
|
|
volumeDidChange = true;
|
|
break;
|
|
|
|
case ACT_SUSPEND:
|
|
g_display->clrScr();
|
|
g_display->drawString(M_SELECTED, 80, 100,"Suspending VM...");
|
|
g_display->flush();
|
|
// CPU is already suspended, so this is safe...
|
|
((AppleVM *)g_vm)->Suspend("suspend.vm");
|
|
break;
|
|
case ACT_RESTORE:
|
|
// CPU is already suspended, so this is safe...
|
|
g_display->clrScr();
|
|
g_display->drawString(M_SELECTED, 80, 100,"Resuming VM...");
|
|
g_display->flush();
|
|
((AppleVM *)g_vm)->Resume("suspend.vm");
|
|
break;
|
|
}
|
|
}
|
|
|
|
done:
|
|
// Undo whatever damage we've done to the screen
|
|
g_display->redraw();
|
|
AiieRect r = { 0, 0, 191, 279 };
|
|
g_display->blit(r);
|
|
|
|
// return true if any persistent setting changed that we want to store in eeprom
|
|
return volumeDidChange;
|
|
}
|
|
|
|
void BIOS::WarmReset()
|
|
{
|
|
g_cpu->Reset();
|
|
}
|
|
|
|
void BIOS::ColdReboot()
|
|
{
|
|
g_vm->Reset();
|
|
g_cpu->Reset();
|
|
}
|
|
|
|
uint8_t BIOS::GetAction(int8_t selection)
|
|
{
|
|
while (1) {
|
|
DrawMainMenu();
|
|
while (!g_keyboard->kbhit()
|
|
#ifdef TEENSYDUINO
|
|
&&
|
|
(digitalRead(RESETPIN) == HIGH)
|
|
#endif
|
|
) {
|
|
;
|
|
// Wait for either a keypress or the reset button to be pressed
|
|
}
|
|
|
|
#ifdef TEENSYDUINO
|
|
if (digitalRead(RESETPIN) == LOW) {
|
|
// wait until it's no longer pressed
|
|
while (digitalRead(RESETPIN) == HIGH)
|
|
;
|
|
delay(100); // wait long enough for it to debounce
|
|
// then return an exit code
|
|
return ACT_EXIT;
|
|
}
|
|
#else
|
|
// FIXME: look for F10 or ESC & return ACT_EXIT?
|
|
#endif
|
|
|
|
// selectedMenuItem and selectedMenu can go out of bounds here, and that's okay;
|
|
// the current menu (and the menu bar) will re-pin it appropriately...
|
|
switch (g_keyboard->read()) {
|
|
case PK_DARR:
|
|
selectedMenuItem++;
|
|
break;
|
|
case PK_UARR:
|
|
selectedMenuItem--;
|
|
break;
|
|
case PK_RARR:
|
|
selectedMenu++;
|
|
break;
|
|
case PK_LARR:
|
|
selectedMenu--;
|
|
break;
|
|
case PK_RET:
|
|
{
|
|
int8_t activeAction = getCurrentMenuAction();
|
|
if (activeAction > 0) {
|
|
return activeAction;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
int8_t BIOS::getCurrentMenuAction()
|
|
{
|
|
int8_t ret = -1;
|
|
|
|
switch (selectedMenu) {
|
|
case 0: // VM
|
|
if (isActionActive(vmActions[selectedMenuItem]))
|
|
return vmActions[selectedMenuItem];
|
|
break;
|
|
case 1: // Hardware
|
|
if (isActionActive(hardwareActions[selectedMenuItem]))
|
|
return hardwareActions[selectedMenuItem];
|
|
break;
|
|
case 2: // Disks
|
|
if (isActionActive(diskActions[selectedMenuItem]))
|
|
return diskActions[selectedMenuItem];
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
bool BIOS::isActionActive(int8_t action)
|
|
{
|
|
// don't return true for disk events that aren't valid
|
|
switch (action) {
|
|
case ACT_EXIT:
|
|
case ACT_RESET:
|
|
case ACT_COLDBOOT:
|
|
case ACT_MONITOR:
|
|
case ACT_DISPLAYTYPE:
|
|
case ACT_SPEED:
|
|
case ACT_DEBUG:
|
|
case ACT_PRIMODE:
|
|
case ACT_DISK1:
|
|
case ACT_DISK2:
|
|
case ACT_HD1:
|
|
case ACT_HD2:
|
|
case ACT_SUSPEND:
|
|
case ACT_RESTORE:
|
|
return true;
|
|
|
|
case ACT_VOLPLUS:
|
|
return (g_volume < 15);
|
|
case ACT_VOLMINUS:
|
|
return (g_volume > 0);
|
|
}
|
|
|
|
/* NOTREACHED */
|
|
return false;
|
|
}
|
|
|
|
void BIOS::DrawVMMenu()
|
|
{
|
|
if (selectedMenuItem < 0)
|
|
selectedMenuItem = sizeof(vmActions)-1;
|
|
|
|
selectedMenuItem %= sizeof(vmActions);
|
|
|
|
char buf[40];
|
|
for (int i=0; i<sizeof(vmActions); i++) {
|
|
switch (vmActions[i]) {
|
|
case ACT_DEBUG:
|
|
{
|
|
const char *templateString = "Debug: %s";
|
|
switch (g_debugMode) {
|
|
case D_NONE:
|
|
sprintf(buf, templateString, "off");
|
|
break;
|
|
case D_SHOWFPS:
|
|
sprintf(buf, templateString, "Show FPS");
|
|
break;
|
|
case D_SHOWMEMFREE:
|
|
sprintf(buf, templateString, "Show mem free");
|
|
break;
|
|
case D_SHOWPADDLES:
|
|
sprintf(buf, templateString, "Show paddles");
|
|
break;
|
|
case D_SHOWPC:
|
|
sprintf(buf, templateString, "Show PC");
|
|
break;
|
|
case D_SHOWCYCLES:
|
|
sprintf(buf, templateString, "Show cycles");
|
|
break;
|
|
case D_SHOWBATTERY:
|
|
sprintf(buf, templateString, "Show battery");
|
|
break;
|
|
case D_SHOWTIME:
|
|
sprintf(buf, templateString, "Show time");
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_EXIT:
|
|
strcpy(buf, "Resume");
|
|
break;
|
|
case ACT_RESET:
|
|
strcpy(buf, "Reset");
|
|
break;
|
|
case ACT_COLDBOOT:
|
|
strcpy(buf, "Cold Reboot");
|
|
break;
|
|
case ACT_MONITOR:
|
|
strcpy(buf, "Drop to Monitor");
|
|
break;
|
|
case ACT_SUSPEND:
|
|
strcpy(buf, "Suspend VM");
|
|
break;
|
|
case ACT_RESTORE:
|
|
strcpy(buf, "Restore VM");
|
|
break;
|
|
}
|
|
|
|
if (isActionActive(vmActions[i])) {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTED : M_NORMAL, 10, 20 + 14 * i, buf);
|
|
} else {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTDISABLED : M_DISABLED, 10, 20 + 14 * i, buf);
|
|
}
|
|
}
|
|
}
|
|
|
|
void BIOS::DrawHardwareMenu()
|
|
{
|
|
if (selectedMenuItem < 0)
|
|
selectedMenuItem = sizeof(hardwareActions)-1;
|
|
|
|
selectedMenuItem %= sizeof(hardwareActions);
|
|
|
|
char buf[40];
|
|
for (int i=0; i<sizeof(hardwareActions); i++) {
|
|
switch (hardwareActions[i]) {
|
|
case ACT_DISPLAYTYPE:
|
|
{
|
|
const char *templateString = "Display: %s";
|
|
switch (g_displayType) {
|
|
case m_blackAndWhite:
|
|
sprintf(buf, templateString, "B&W");
|
|
break;
|
|
case m_monochrome:
|
|
sprintf(buf, templateString, "Mono");
|
|
break;
|
|
case m_ntsclike:
|
|
sprintf(buf, templateString, "NTSC-like");
|
|
break;
|
|
case m_perfectcolor:
|
|
sprintf(buf, templateString, "RGB");
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_SPEED:
|
|
{
|
|
const char *templateString = "CPU Speed: %s";
|
|
switch (currentCPUSpeedIndex) {
|
|
case CPUSPEED_HALF:
|
|
sprintf(buf, templateString, "Half [511.5 kHz]");
|
|
break;
|
|
case CPUSPEED_DOUBLE:
|
|
sprintf(buf, templateString, "Double (2.046 MHz)");
|
|
break;
|
|
case CPUSPEED_QUAD:
|
|
sprintf(buf, templateString, "Quad (4.092 MHz)");
|
|
break;
|
|
default:
|
|
sprintf(buf, templateString, "Normal (1.023 MHz)");
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case ACT_PRIMODE:
|
|
if (g_prioritizeDisplay)
|
|
strcpy(buf, "Prioritize display over audio");
|
|
else
|
|
strcpy(buf, "Prioritize audio over display");
|
|
break;
|
|
case ACT_VOLPLUS:
|
|
strcpy(buf, "Volume +");
|
|
break;
|
|
case ACT_VOLMINUS:
|
|
strcpy(buf, "Volume -");
|
|
break;
|
|
}
|
|
|
|
if (isActionActive(hardwareActions[i])) {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTED : M_NORMAL, 10, 20 + 14 * i, buf);
|
|
} else {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTDISABLED : M_DISABLED, 10, 20 + 14 * i, buf);
|
|
}
|
|
}
|
|
|
|
// draw the volume bar
|
|
uint16_t volCutoff = 300.0 * (float)((float) g_volume / 15.0);
|
|
for (uint8_t y=234; y<=235; y++) {
|
|
for (uint16_t x = 0; x< 300; x++) {
|
|
g_display->drawPixel( x, y, x <= volCutoff ? 0xFFFF : 0x0010 );
|
|
}
|
|
}
|
|
}
|
|
|
|
void BIOS::DrawDisksMenu()
|
|
{
|
|
if (selectedMenuItem < 0)
|
|
selectedMenuItem = sizeof(diskActions)-1;
|
|
|
|
selectedMenuItem %= sizeof(diskActions);
|
|
|
|
char buf[80];
|
|
for (int i=0; i<sizeof(diskActions); i++) {
|
|
switch (diskActions[i]) {
|
|
case ACT_DISK1:
|
|
case ACT_DISK2:
|
|
{
|
|
const char *insertedDiskName = ((AppleVM *)g_vm)->DiskName(diskActions[i]==ACT_DISK2 ? 1 : 0);
|
|
// Get the name of the file; strip off the directory
|
|
const char *endPtr = &insertedDiskName[strlen(insertedDiskName)-1];
|
|
while (endPtr != insertedDiskName &&
|
|
*endPtr != '/') {
|
|
endPtr--;
|
|
}
|
|
if (*endPtr == '/') {
|
|
endPtr++;
|
|
}
|
|
|
|
if (insertedDiskName[0]) {
|
|
snprintf(buf, sizeof(buf), "Eject Disk %d [%s]", diskActions[i]==ACT_DISK2 ? 2 : 1, endPtr);
|
|
} else {
|
|
sprintf(buf, "Insert Disk %d", diskActions[i]==ACT_DISK2 ? 2 : 1);
|
|
}
|
|
}
|
|
break;
|
|
case ACT_HD1:
|
|
case ACT_HD2:
|
|
{
|
|
const char *insertedDiskName = ((AppleVM *)g_vm)->HDName(diskActions[i]==ACT_HD2 ? 1 : 0);
|
|
// Get the name of the file; strip off the directory
|
|
const char *endPtr = &insertedDiskName[strlen(insertedDiskName)-1];
|
|
while (endPtr != insertedDiskName &&
|
|
*endPtr != '/') {
|
|
endPtr--;
|
|
}
|
|
if (*endPtr == '/') {
|
|
endPtr++;
|
|
}
|
|
|
|
if (insertedDiskName[0]) {
|
|
snprintf(buf, sizeof(buf), "Remove HD %d [%s]", diskActions[i]==ACT_HD2 ? 2 : 1, endPtr);
|
|
} else {
|
|
sprintf(buf, "Connect HD %d", diskActions[i]==ACT_HD2 ? 2 : 1);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (isActionActive(diskActions[i])) {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTED : M_NORMAL, 10, 20 + 14 * i, buf);
|
|
} else {
|
|
g_display->drawString(selectedMenuItem == i ? M_SELECTDISABLED : M_DISABLED, 10, 20 + 14 * i, buf);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void BIOS::DrawCurrentMenu()
|
|
{
|
|
switch (selectedMenu) {
|
|
case 0: // VM
|
|
DrawVMMenu();
|
|
break;
|
|
case 1: // Hardware
|
|
DrawHardwareMenu();
|
|
break;
|
|
case 2: // Disks
|
|
DrawDisksMenu();
|
|
break;
|
|
}
|
|
}
|
|
|
|
void BIOS::DrawMainMenu()
|
|
{
|
|
g_display->clrScr();
|
|
// g_display->drawString(M_NORMAL, 0, 0, "BIOS Configuration");
|
|
|
|
DrawMenuBar();
|
|
|
|
DrawCurrentMenu();
|
|
|
|
g_display->flush();
|
|
}
|
|
|
|
|
|
// return true if the user selects an image
|
|
// sets selectedFile (index; -1 = "nope") and fileDirectory[][] (names of up to BIOS_MAXFILES files)
|
|
bool BIOS::SelectDiskImage()
|
|
{
|
|
int8_t sel = 0;
|
|
int8_t page = 0;
|
|
|
|
while (1) {
|
|
DrawDiskNames(page, sel);
|
|
|
|
while (!g_keyboard->kbhit())
|
|
;
|
|
switch (g_keyboard->read()) {
|
|
case PK_DARR:
|
|
sel++;
|
|
sel %= BIOS_MAXFILES + 2;
|
|
break;
|
|
case PK_UARR:
|
|
sel--;
|
|
if (sel < 0)
|
|
sel = BIOS_MAXFILES + 1;
|
|
break;
|
|
case PK_ESC:
|
|
return false;
|
|
case PK_RET:
|
|
if (sel == 0) {
|
|
page--;
|
|
if (page < 0) page = 0;
|
|
// else sel = BIOS_MAXFILES + 1;
|
|
}
|
|
else if (sel == BIOS_MAXFILES+1) {
|
|
page++;
|
|
//sel = 0;
|
|
} else {
|
|
if (strcmp(fileDirectory[sel-1], "../") == 0) {
|
|
// Go up a directory (strip a directory name from rootPath)
|
|
stripDirectory();
|
|
page = 0;
|
|
//sel = 0;
|
|
continue;
|
|
} else if (fileDirectory[sel-1][strlen(fileDirectory[sel-1])-1] == '/') {
|
|
// Descend in to the directory. FIXME: file path length?
|
|
strcat(rootPath, fileDirectory[sel-1]);
|
|
sel = 0;
|
|
page = 0;
|
|
continue;
|
|
} else {
|
|
selectedFile = sel - 1;
|
|
g_display->flush();
|
|
return true;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
g_display->flush();
|
|
}
|
|
|
|
void BIOS::stripDirectory()
|
|
{
|
|
rootPath[strlen(rootPath)-1] = '\0'; // remove the last character
|
|
|
|
while (rootPath[0] && rootPath[strlen(rootPath)-1] != '/') {
|
|
rootPath[strlen(rootPath)-1] = '\0'; // remove the last character again
|
|
}
|
|
|
|
// We're either at the previous directory, or we've nulled out the whole thing.
|
|
|
|
if (rootPath[0] == '\0') {
|
|
// Never go beyond this
|
|
strcpy(rootPath, "/");
|
|
}
|
|
}
|
|
|
|
void BIOS::DrawDiskNames(uint8_t page, int8_t selection)
|
|
{
|
|
uint8_t fileCount = GatherFilenames(page);
|
|
g_display->clrScr();
|
|
g_display->drawString(M_NORMAL, 0, 12, "BIOS Configuration - pick disk");
|
|
|
|
if (page == 0) {
|
|
g_display->drawString(selection == 0 ? M_SELECTDISABLED : M_DISABLED, 10, 50, "<Prev>");
|
|
} else {
|
|
g_display->drawString(selection == 0 ? M_SELECTED : M_NORMAL, 10, 50, "<Prev>");
|
|
}
|
|
|
|
uint8_t i;
|
|
for (i=0; i<BIOS_MAXFILES; i++) {
|
|
if (i < fileCount) {
|
|
g_display->drawString((i == selection-1) ? M_SELECTED : M_NORMAL, 10, 50 + 14 * (i+1), fileDirectory[i]);
|
|
} else {
|
|
g_display->drawString((i == selection-1) ? M_SELECTDISABLED : M_DISABLED, 10, 50+14*(i+1), "-");
|
|
}
|
|
|
|
}
|
|
|
|
// FIXME: this doesn't accurately say whether or not there *are* more.
|
|
if (fileCount == BIOS_MAXFILES || fileCount == 0) {
|
|
g_display->drawString((i+1 == selection) ? M_SELECTDISABLED : M_DISABLED, 10, 50 + 14 * (i+1), "<Next>");
|
|
} else {
|
|
g_display->drawString(i+1 == selection ? M_SELECTED : M_NORMAL, 10, 50 + 14 * (i+1), "<Next>");
|
|
}
|
|
|
|
g_display->flush();
|
|
}
|
|
|
|
|
|
uint8_t BIOS::GatherFilenames(uint8_t pageOffset)
|
|
{
|
|
uint8_t startNum = 10 * pageOffset;
|
|
uint8_t count = 0; // number we're including in our listing
|
|
|
|
while (1) {
|
|
char fn[BIOS_MAXPATH];
|
|
int8_t idx = g_filemanager->readDir(rootPath, "dsk,.po,nib,img", fn, startNum + count, BIOS_MAXPATH);
|
|
|
|
if (idx == -1) {
|
|
return count;
|
|
}
|
|
|
|
idx++;
|
|
|
|
strncpy(fileDirectory[count], fn, BIOS_MAXPATH);
|
|
count++;
|
|
|
|
if (count >= BIOS_MAXFILES) {
|
|
return count;
|
|
}
|
|
}
|
|
}
|
|
|