apple2idiot/notes.md
2021-09-16 17:02:19 -07:00

2.1 KiB

Debugging board 08/28/2021

What the ESP thinks is address 0x00 (0xC200) is 0xC2FF,49919 to the Apple. AND the data from the ESP is 192 and the apple sees 3, so the endian is backwards for the data and logic levels for the address are flipped.

Needed changes to board

DONE: Add a GND and +5V breakout. Fix DEVSEL address in silkscreen docs. DONE: Unconnect addresses above A7. DONE: Add diode to +5V. DONE: Move ESP32 towards keyboard to accomodate USB Software reset of ESP32

Potential Trivial Features

  • Gives each computer a unique ID (MAC address)
  • Prodos driver for NPT time.

Thanks

Renee flux c2t

Ordered:

  • 5PCS IDT7132SA100P IDT7132SA DIP-48 HIGH-SPEED 2K x 8 DUAL-PORT STATIC RAM
  • STM32F411 "BlackPill" Development Board

Misc

ESP32 Interupt Issues

Python binar/hex/dec manipulation

In [11]: format(10, '016b')
Out[11]: '0000000000001010'

bin(10)

Jumper and Breakout pins

  • Input (to ESP32) only ~IOSEL (from Apple2) ~BSYL (from Apple2 side of IDT7132) ~BSYR (from ESP32 side of IDT7132)
  • Apple II Pins to header
    • IOSEL
    • DEVSEL
    • IOSTROBE
  • IDT7132S Pins to header
    • BSYL
    • BSYR
  • ESP32 Pins to header
    • GPIO 0
    • GPIO 1 (TX)
    • GPIO 2
    • GPIO 3 (RX)
    • GPIO 4
    • GPIO 26
    • GPIO 27
    • GPIO 32
    • GPIO 33
    • GPIO 34 (input only) No pullup, needs resistor?
    • GPIO 35 (input only) No pullup, needs resistor?
    • SENSOR_VP (input only) No pullup, needs resistor?
    • SENSOR_VN (input only) No pullup, needs resistor?