Commit Graph

20 Commits

Author SHA1 Message Date
Dave
787e49e1d9 Cleanups, use cherry aligners with futaba keys, bump rev number 2020-04-08 02:03:50 -05:00
Dave
e784abe263 Moved mounting slots from keyboard PCB to aligners
- This allows the PCB to sink below the mounting brackets.  The aligner height can
be adjusted relative to the mounting brackets using spacers.

- changed futaba aligners to use cherry stabilizers.

- bumped rev number
2020-04-08 02:01:14 -05:00
Dave
89bfdd71a9 Move LED current limit resistors to keyboard PCB
For better matching of current limit resistors to LEDs, the resistors are moved
to the keyboard matrix PCB, where they can be tuned for maximum brightness (at
100% duty cycle).  This allows consistent keyboard brightness when a single
interface PCB is swapped between keyboard matrices.
2020-04-05 20:00:20 -05:00
David Fenyes
b579d70181 remove temporary files 2020-03-18 16:19:43 -05:00
David Fenyes
63e733c18d Moved spare LED from caps-lock to @ (OSI shift LOCK)
This allows the keymap to determine which LED is used, rather than requiring the
decision to be hardwired in at the time of assembly.  For the OSI keyboard, the
LED could be placed on the SHIFTLOCK key, at the far right LED, or in the
CAPSLOCK position, which is just to the left of the RETURN and not otherwise
populated in the OSI layout.
2020-03-04 20:24:06 -06:00
David Fenyes
96a4c4f806 Fix font size for alphanumerics to 0.187" instead of 0.150" 2020-02-28 03:30:21 -06:00
David Fenyes
cde8c54e6d removed extraneous hole outside keyboard outline. 2020-02-16 12:53:08 -06:00
David Fenyes
c4b26cbe86 Update rev to 1.4
pcb: ajust cutout to account for 1.5u wide LEFT SHIFT
schematic: minor text format cleanup
2020-01-31 23:22:21 -06:00
David Fenyes
5ba0c228aa Update the spacing comment to include spacing for keyboard cutout 2020-01-31 14:35:28 -06:00
David Fenyes
5a7ccc1c38 Adjustments to keyboard cutout outline on B.Fab layer. 2020-01-31 14:31:05 -06:00
David Fenyes
f5c8803586 Fixed details of keycap sets
- SOL-20: Specify SA profile, row 3
- classic: Specify SA profile, row 3 (incorrectly specified DSA)
- classic: add 8u spacebar.  whoops.
2020-01-30 16:59:23 -06:00
David Fenyes
b8e08ff7c9 add SOL-20 and classic keycap details 2020-01-28 15:16:40 -06:00
David Fenyes
5bd775d010 Aditional outline fix for Apple II 2020-01-28 14:57:04 -06:00
David Fenyes
a2bf0d93a0 Fix wrong apple-II mount dimensions
- pulled in the right border and mounting holes for Apple-II mounting dimensions
- modified the "~^" key courtyard to allow closer positioning of the upper right
  Apple II Mounting hole.  (The ~^ key is not installed in an Apple II keyboard)
- Moved tracks and diodes as needed to keep everything in the new outline.
2020-01-28 14:50:23 -06:00
David Fenyes
a03a207a09 Keyboard layout updates
- Add extra key to the left side of row 4 to permit "inverted T" for those who
  want it.

- Tiny shifts of several keys to correct key distances

- Include mounting holes with daughter board connector, to ensure consistency.
2020-01-20 07:22:13 -06:00
David Fenyes
8cb1f9cf5b Trace fixes
- removed extraneous unconnected traces
- straightened an off-angle trace that was violating clearance.
2020-01-04 04:35:09 -06:00
Dave
594e3d7d8b Finalize layout and mounting
- Add apple 2 mounting slots (and stretch PCB to accommodate slots
- Add pass-through holes in aligners for OSI keyboard spacers
- Move 'ESC' key next to '1' key
- Add TAB key next to Q key
- remove 'here is' and finalize "helper" keys along left side of keyboard
- move legends off of PCB traces
- update to release 1.3
2020-01-02 10:08:11 -06:00
Dave
adcb32aada Swap "O" (Cap O) and "0" (zero) keys
The "0" and "O" keys were swapped on the PCB, requiring a keymap fix for the
ASCII adapter.  The swapped keys would not be an issue for a keyscanning ASCII
converter, but would preclude use in OSI systems, so this fix puts the keys
back in position compatible with OSI.
2019-12-24 09:27:53 -06:00
Dave
a58dcc4234 OSI mounting holes
- Add OSI-compatible mounting holes.
- Adjust keyboard and aligner holes to make room for the OSI mounting holes
- Change "Universal Keyboard" to "Unified Keyboard" in the design files.
2019-12-14 03:52:15 -06:00
Dave
784805adc7 first commit 2019-12-12 14:46:29 -06:00