Dave
a3a015a759
Update Sol keyboard to 1.5 (Minor changes)
...
- Fix title in Schematic
- Slightly enlarge center post hole on switch footprint, to allow a bit of
tolerance. Very tight tolerance makes the keyboards hard to assemble.
2020-06-16 22:01:36 -05:00
Dave
2dd45755b1
Added stabilizer bending guide and futaba stabilizer posts to PCB
2020-06-08 17:57:47 -05:00
Dave
cb68742fa4
Corrections to Sol-20 keycap BOM
...
- Add the _/DEL key
- Specify that the keypad "." key be centered vertically and horizontally.
2020-06-06 16:52:09 -05:00
Dave
9f7520fa50
Remove outdated note
2020-06-06 12:54:44 -05:00
Dave
c44a270e78
Another small README edit
2020-06-05 10:53:35 -05:00
Dave
a97de184fd
Minor README edit
2020-06-05 10:38:24 -05:00
Dave
9e5d71d5ba
Change photo width
2020-06-05 10:35:01 -05:00
Dave
eb25119569
Add photo of SOL keyboard
2020-06-05 10:31:49 -05:00
Dave
54a7cd0cd1
Add mounting holes for PCB along right side of keyboard
...
- moving interface PCB to right side eliminates clearance issues.
2020-05-21 13:52:04 -05:00
Dave
8828d90d96
Add additional mounting holes to ASCII interface PCBS and Sol-20 PCB
2020-05-14 03:12:14 -05:00
Dave
63b1bb2ad9
Clean up some wording in the Sol-20 readme
2020-05-12 21:47:00 -05:00
Dave
922de973f8
Adjsut mounting slots and alignment of mounting holes.
2020-05-05 16:58:20 -05:00
Dave
ca6597412a
Remove extraneous no-connect
2020-05-05 16:41:31 -05:00
Dave
bef1710bcd
Minor cleanups
2020-05-05 16:40:48 -05:00
Dave
b135998254
On aligners, moved numpad 0.1825" to the right.
2020-04-13 15:08:55 -05:00
Dave
e784abe263
Moved mounting slots from keyboard PCB to aligners
...
- This allows the PCB to sink below the mounting brackets. The aligner height can
be adjusted relative to the mounting brackets using spacers.
- changed futaba aligners to use cherry stabilizers.
- bumped rev number
2020-04-08 02:01:14 -05:00
Dave
4bf0e3eb33
Add series resistors to LEDs and stabilizer to 2u shift
2020-04-05 10:08:14 -05:00
dfnr2
2870130cb5
Swapped text in futaba "main" aligner
2020-03-22 22:08:34 -05:00
David Fenyes
3cd9547d59
Added aligners for SOL keyboard
...
- options for complete aligner, and split main/numpad aligners
- adjusted aligner spacer mounting holes on PCB.
2020-03-21 12:13:07 -05:00
David Fenyes
869f7c2260
Deleted obsolete files
2020-03-21 12:10:49 -05:00
David Fenyes
b579d70181
remove temporary files
2020-03-18 16:19:43 -05:00
David Fenyes
c91939e6e9
Add silk screen information to cherry aligner.
2020-03-18 16:16:12 -05:00
David Fenyes
91ae8d0bfa
Replace wrong cherry aligner file.
2020-03-18 16:12:05 -05:00
David Fenyes
e60c769824
Add Cherry and Futaba aligners and add text to PCB
2020-03-18 15:52:30 -05:00
David Fenyes
6e21b96519
SOL keyboard adjustments
...
- Fixed position offset error in first three rows of the SOL keyboard
- moved key matrix interface connector to bottom of board so the parallel output
connector can be at the top of the keyboard.
- Adjusted size of mounting slots to accommodate #6 screws.
- ongoing clean up of traces.
2020-03-16 13:27:09 -05:00
David Fenyes
f5c8803586
Fixed details of keycap sets
...
- SOL-20: Specify SA profile, row 3
- classic: Specify SA profile, row 3 (incorrectly specified DSA)
- classic: add 8u spacebar. whoops.
2020-01-30 16:59:23 -06:00
David Fenyes
ef068a1ae5
fix typo
2020-01-29 09:10:48 -06:00
David Fenyes
7839af3eba
Add README.md file
2020-01-29 09:09:38 -06:00
David Fenyes
76098140ef
Moved connector to top of board
...
Reduces required extra space at bottom of board. Needed to fit in case.
2020-01-29 08:57:20 -06:00
David Fenyes
203ff558c0
Initial rev of SOL-20 keyboard PCB
2020-01-28 20:24:35 -06:00
David Fenyes
b8e08ff7c9
add SOL-20 and classic keycap details
2020-01-28 15:16:40 -06:00
