Commit Graph

119 Commits

Author SHA1 Message Date
Dave
aaf6233723 Silk screen cleanups 2020-04-14 00:29:19 -05:00
Dave
1a9c84aac1 Add Atmega2560-based ASCII interface board 2020-04-13 20:54:56 -05:00
Dave
b135998254 On aligners, moved numpad 0.1825" to the right. 2020-04-13 15:08:55 -05:00
Dave
623a04c6c4 Changed resistor value from "R_US" to 470 2020-04-13 15:08:31 -05:00
Dave
fc4cb08d29 Clean ups
- Added comment clarifications

- Moved repeate_state_t definition from asdf_repeat.h to asdf_repeat.c, since
  this type is only used internally.
2020-04-09 15:47:27 -05:00
Dave
47bc7c586f More comment cleanups and clarifications.
Rename some variables to clarify use
2020-04-08 15:00:43 -05:00
Dave
644efa7122 Test cleanups 2020-04-08 14:23:13 -05:00
Dave
30cd305fe6 Fix and clarify comments, add COPYING file 2020-04-08 12:41:53 -05:00
Dave
b8fae61ba8 Added footprints for 2u key with cherry aligner
- footprints for PCB
- footprints for aligners
2020-04-08 02:05:17 -05:00
Dave
787e49e1d9 Cleanups, use cherry aligners with futaba keys, bump rev number 2020-04-08 02:03:50 -05:00
Dave
e784abe263 Moved mounting slots from keyboard PCB to aligners
- This allows the PCB to sink below the mounting brackets.  The aligner height can
be adjusted relative to the mounting brackets using spacers.

- changed futaba aligners to use cherry stabilizers.

- bumped rev number
2020-04-08 02:01:14 -05:00
Dave
89bfdd71a9 Move LED current limit resistors to keyboard PCB
For better matching of current limit resistors to LEDs, the resistors are moved
to the keyboard matrix PCB, where they can be tuned for maximum brightness (at
100% duty cycle).  This allows consistent keyboard brightness when a single
interface PCB is swapped between keyboard matrices.
2020-04-05 20:00:20 -05:00
Dave
4bf0e3eb33 Add series resistors to LEDs and stabilizer to 2u shift 2020-04-05 10:08:14 -05:00
dfnr2
2870130cb5 Swapped text in futaba "main" aligner 2020-03-22 22:08:34 -05:00
David Fenyes
b7f5f29f7b Put correct DIP switch row in sol keycap definitions for rev 2.3 interface 2020-03-21 14:47:54 -05:00
David Fenyes
e37da4e969 Reset modifier states when keymap is reset
- asdf.c: remove asdf_modifiers_init() from asdf_init().
- asdf_keymaps.c: add a call do asdf_modifiers_init()
  to asdf_keymaps_select_keymap()
2020-03-21 14:26:57 -05:00
David Fenyes
3cd9547d59 Added aligners for SOL keyboard
- options for complete aligner, and split main/numpad aligners
- adjusted aligner spacer mounting holes on PCB.
2020-03-21 12:13:07 -05:00
David Fenyes
869f7c2260 Deleted obsolete files 2020-03-21 12:10:49 -05:00
David Fenyes
0400c08f79 Rename Cherry MX footprint 2020-03-21 11:57:21 -05:00
David Fenyes
0ba921f2ce Added SOL-20 keymap
- Add Keymaps/asdf_keymap_defs_sol.h, and add the hooks in the master keymap

- asdf.h: Change start of ACTION codes to 0xA0, since SOL-20 uses codes from 0x80-0x9a

- asdf_ascii.h: Add named ASCII control codes to
2020-03-21 11:53:51 -05:00
David Fenyes
8f09246a4d Remove reference to special indicator functions (now virtual) 2020-03-20 14:43:18 -05:00
David Fenyes
b579d70181 remove temporary files 2020-03-18 16:19:43 -05:00
David Fenyes
c91939e6e9 Add silk screen information to cherry aligner. 2020-03-18 16:16:12 -05:00
David Fenyes
91ae8d0bfa Replace wrong cherry aligner file. 2020-03-18 16:12:05 -05:00
David Fenyes
e60c769824 Add Cherry and Futaba aligners and add text to PCB 2020-03-18 15:52:30 -05:00
David Fenyes
dae4b8d322 Replaced the Virtual out pulse function with long and short pulse
- Replace V_PULSE with V_PULSE_LONG and V_PULSE_SHORT functions.

- replace the asdf_arch_pulse_delay() with asdf_arch_pulse_delay_short() and
asdf_arch_pulse_delay_long() functions.

- modify keymaps to use long and short pulses.

- long pulse is 50 ms.  Short pulse is 10 us.

- Added localizing prefix to keymap definitions to avoid conflicts.
2020-03-17 01:42:51 -05:00
David Fenyes
58126667d9 Add a header-and-mounting-holes footprint with fewer mounting holes
The SOL-20 keyboard doesn't have space for mounting holes right next to the
matrix header, so the new footprint eliminates those mounting holes.
2020-03-16 13:36:19 -05:00
David Fenyes
d2d0c4c673 Add 3D model to Cherry MX footprint. 2020-03-16 13:35:41 -05:00
David Fenyes
6e21b96519 SOL keyboard adjustments
- Fixed position offset error in first three rows of the SOL keyboard

- moved key matrix interface connector to bottom of board so the parallel output
connector can be at the top of the keyboard.

- Adjusted size of mounting slots to accommodate #6 screws.

- ongoing clean up of traces.
2020-03-16 13:27:09 -05:00
David Fenyes
93349ed6e9 Add support for "hi-z when low" outputs
The apple 1 CLEAR input requires a high-impedance inactive state to avoid
conflict with the pin output of the 7404 at D12 (via CR4). So, to cover this
condition most generally, this patch changes the adds a Hi-Z when low physical
device for each output line, to complement the Hi-Z-when-high open collector
emulation. The nomenclature is changed from OUT*_OC (emulated open collector) to
OUT*_OPEN_HI and OUT*_OPEN_LO to indicate which condition gets the Hi-Z state.

- added the set() functions to the asdf_arch_atmega328p.[ch] files and applied
the above nomenclature.

- Added the set() functions to the asdf_physical.[ch] files and applied the
above nomenclature

- Modified the SCREEN_CLEAR device to PHYSICAL_OUT1_OPEN_LO in the apple2 and
ascii keymaps.

- Changed the RESET from PHYSICAL_OUT1_OC to PHYSICAL_OUT1_OPEN_HI in the apple2
and ascii keymaps.
2020-03-16 12:56:21 -05:00
David Fenyes
702ed71d60 add a clear-screen (ACTION_CLEAR) to the Shift-RESET combination. 2020-03-14 21:55:03 -05:00
Dave
68d2dfb115 Fix typo 2020-03-14 10:40:20 -05:00
Dave
04321da29c Fix typecast for key repeat timer, and some header fixes. 2020-03-14 10:37:43 -05:00
Dave
ed761974e6 Modifiers cleanup
- asdf_modifiers.[ch]: Replace asdf_modifier_shiftlock_activate() with
  asdf_modifier_shiftlock_on_activate() and
  asdf_modifier_shiftlock_toggle_activate().  Instead of a configurateion
  setting for shiftlock state to switch between SHIFTLOCK locks on, SHIFT turns
  off, vs SHIFTLOCK toggles, and SHIFT turns off, create two different
  SHIFTLOCK functions, one for each behavior, and allow the keymap to bind the
  desired function.

- asdf.h: replace ACTION_SHIFTLOCK with ACTION_SHIFTLOCK_ON and
  ACTION_SHIFTLOCK_TOGGLE.

- asdf.h: move start of ACTION codes from 0x80 to 0x90, since SOL-20 uses codes
  from 0x80-0x8f.

- asdf.c: test for ACTION code using (code > ASDF_ACTION) instead of (code &
  ASDF_ACTION), since ASDF_ACTION need not be a power of 2.

- asdf_modifiers.[ch] and other files: remove
  asdf_modifiers_shiftlock_deactivate() and
  asdf_modifiers_capslock_deactivate(), and any references to these functions
  since they are null functions anyway.
2020-03-14 00:11:29 -05:00
David Fenyes
aeaac665af Comment fixes for accurate descriptions. 2020-03-13 21:51:19 -05:00
David Fenyes
bd7b2167fb Removed extraneous definitions from Apple2 keymap file. 2020-03-13 00:51:31 -05:00
David Fenyes
abc462e711 Improved comments
- Added physical PCB key mapping for reference
- Make sure CAPSLOCK LED doesn't toggle in the ALL CAPS keymaps.
2020-03-13 00:48:05 -05:00
dfnr2
bf4bca76ed Update README.md 2020-03-13 00:09:08 -05:00
David Fenyes
8740ab3262 Comment and nomenclature cleanups
- fix and clarify various function header comments
- use consistent nomenclature for virtual layer.
2020-03-12 23:56:09 -05:00
David Fenyes
01008af937 Break out physical resource functions into asdf_physical.[ch]
- Split asdf_virtual.c into asdf_physical.c and asdf_virtual.c, moving the
functions that handle the physical resources to asdf_physical.c

- cleaned up nomenclature to be more consistent and less confusing.

- fixed keymap files and tests to use asdf_physical.c/h and new nomenclature.

- added asdf_physical.c to Makefiles.
2020-03-12 00:45:59 -05:00
David Fenyes
5c2235e79c Apple 2 map fixes
Set the lamp under the caps lock key (next to RETURN, not in apple2 layout) to
off.

Remove the right square bracket "]" from the apple 2 map.
2020-03-11 02:08:37 -05:00
David Fenyes
5bbdbe1c49 remove ACTION_RESET and ACTION_CLEAR
These are now implemented through virtual outputs, defined in the keymap files.
2020-03-11 01:54:41 -05:00
David Fenyes
72a84f0363 add safeguards for virtual device assignment
Disallow assignment of invalid virtual or real devices
Disallow assignment of a real devices that have already been assigned.
add unit test cases for virtual devices
2020-03-11 01:52:47 -05:00
David Fenyes
73e2760d94 Add more unit tests for virtual layer
- use macros to designate which keymaps are used to setup the tests.
2020-03-11 01:50:27 -05:00
David Fenyes
23237fae88 Added unit tests for virtual outputs. 2020-03-09 05:16:52 -05:00
David Fenyes
5a6a64dd55 Remove #include "asdf_actions.h" from asdf.c 2020-03-08 15:08:10 -05:00
David Fenyes
3940b96e0d Remove asdf_actions.[ch] files, no longer used. 2020-03-08 15:06:06 -05:00
David Fenyes
1b388bc591 Add virtual output device module (compiles without warning)
* Created test fixture for virtual outputs

* Added virtual output configuration to keymap definitions removed special
actions_send_reset() and actions_send_screenclear() functions, and replaced with
virtual output definitions.

* asdf_actions.c is removed from build.

* asdf_arch_atmega328p.c: added functions to set/clear each real output

* asdf_arch_atmega328p.c: added pulse_delay() function

* asdf_arch_test.c: added mock machinery to emulate outputs, test output
settings, and detect properly and improperly-formed pulses on the outputs.

* asdf_keymaps.c: allocate initialzer array. asdf_keymaps_select_keymap() calls
asdf_virtual_init() with initializer list for the keymap to set up the LEDS and
outputs every time a new keymap is selected.
2020-03-08 14:45:40 -05:00
David Fenyes
44a49afdae modify the SHIFTLOCK and CAPSLOCK led functions to use virtual LEDs 2020-03-06 13:46:27 -06:00
David Fenyes
cff7f6052a Changes for virtual LED and output mapping.
Rough first cut, have not yet tried to compile or test.
2020-03-06 13:24:03 -06:00