Commit Graph

9 Commits

Author SHA1 Message Date
Dave
fb28dd34fc Multiple fixes to classic keyboard for fit and build ease
- remove material from PCB to allow keyboard to fit in Apple II case

- enlarge center hole on cherry MX footprints slightly, to 0.160" to allow
slightly more tolerance, which eases assembly.

- include holes for LEDs on futaba aligner

- include extra pads on main PCB for LEDs with futaba keys

- Add LED on LINE FEED which maps to REPEAT/CAPSLOCK on Apple II keymap
2020-06-17 01:00:01 -05:00
Dave
89bfdd71a9 Move LED current limit resistors to keyboard PCB
For better matching of current limit resistors to LEDs, the resistors are moved
to the keyboard matrix PCB, where they can be tuned for maximum brightness (at
100% duty cycle).  This allows consistent keyboard brightness when a single
interface PCB is swapped between keyboard matrices.
2020-04-05 20:00:20 -05:00
David Fenyes
63e733c18d Moved spare LED from caps-lock to @ (OSI shift LOCK)
This allows the keymap to determine which LED is used, rather than requiring the
decision to be hardwired in at the time of assembly.  For the OSI keyboard, the
LED could be placed on the SHIFTLOCK key, at the far right LED, or in the
CAPSLOCK position, which is just to the left of the RETURN and not otherwise
populated in the OSI layout.
2020-03-04 20:24:06 -06:00
David Fenyes
c4b26cbe86 Update rev to 1.4
pcb: ajust cutout to account for 1.5u wide LEFT SHIFT
schematic: minor text format cleanup
2020-01-31 23:22:21 -06:00
David Fenyes
a03a207a09 Keyboard layout updates
- Add extra key to the left side of row 4 to permit "inverted T" for those who
  want it.

- Tiny shifts of several keys to correct key distances

- Include mounting holes with daughter board connector, to ensure consistency.
2020-01-20 07:22:13 -06:00
Dave
594e3d7d8b Finalize layout and mounting
- Add apple 2 mounting slots (and stretch PCB to accommodate slots
- Add pass-through holes in aligners for OSI keyboard spacers
- Move 'ESC' key next to '1' key
- Add TAB key next to Q key
- remove 'here is' and finalize "helper" keys along left side of keyboard
- move legends off of PCB traces
- update to release 1.3
2020-01-02 10:08:11 -06:00
Dave
adcb32aada Swap "O" (Cap O) and "0" (zero) keys
The "0" and "O" keys were swapped on the PCB, requiring a keymap fix for the
ASCII adapter.  The swapped keys would not be an issue for a keyscanning ASCII
converter, but would preclude use in OSI systems, so this fix puts the keys
back in position compatible with OSI.
2019-12-24 09:27:53 -06:00
Dave
a58dcc4234 OSI mounting holes
- Add OSI-compatible mounting holes.
- Adjust keyboard and aligner holes to make room for the OSI mounting holes
- Change "Universal Keyboard" to "Unified Keyboard" in the design files.
2019-12-14 03:52:15 -06:00
Dave
784805adc7 first commit 2019-12-12 14:46:29 -06:00