dfnr2
51815c7194
Delete unikbd-osi.kicad_pcb
2020-04-21 17:15:08 -05:00
dfnr2
e5d5d32061
Delete unikbd-osi.sch
2020-04-21 17:14:56 -05:00
dfnr2
e458b4024a
Delete unikbd-osi.pro
2020-04-21 17:14:45 -05:00
Dave
0e70d49f44
Remove unused files
2020-04-21 14:37:25 -05:00
Dave
fe238606ff
Delete unused filenames
2020-04-21 14:36:44 -05:00
Dave
bd0c06d69d
Merge branch 'master' of github.com:osiweb/unified_retro_keyboard
2020-04-21 14:34:37 -05:00
Dave
5fa0f80b4e
Add OSI interface schematic
...
Provides a keyboard interface to interface with OSI computers. Equivalent to an
OSI 542C.
- Includes sound circuits
- Includes RESET delay circuit
- SHIFT LOCK can be mechanical push-on/push-off or soft toggle, selectable by
jumper.
- Provide SHIFT LOCK LED output.
2020-04-21 14:30:59 -05:00
dfnr2
e58c25b8d7
Update README.md
2020-04-18 18:12:53 -05:00
dfnr2
6edc2dc535
Update README.md
2020-04-18 00:21:56 -05:00
Dave
8db577580e
Move DIP switch number label
2020-04-18 00:20:23 -05:00
Dave
5c1f5c0297
Update README for Atmega2560 ASCII interface
2020-04-16 17:14:31 -05:00
Dave
ac0d43b97e
Add fixed PCB rendering
2020-04-16 17:13:11 -05:00
Dave
8fa9e27afa
Remove problematic image
2020-04-16 17:10:52 -05:00
Dave
9cb368be32
Clean up connector labels on ATmel-2560 ASCII interface PCB
2020-04-16 17:02:28 -05:00
Dave
f946a699a0
Add 16-pin socket for custom interface/prototyping
2020-04-16 16:56:06 -05:00
Dave
8e3a9b87b4
Update README to include Sol keyboard
2020-04-16 13:53:17 -05:00
Dave
f2eead4db8
Updated README to reflect progress
2020-04-15 15:23:42 -05:00
Dave
427080a666
Clarified textbox comments
2020-04-15 15:23:04 -05:00
Dave
ae5aa3316d
Fix Makefile typo
2020-04-15 10:59:26 -05:00
Dave
e294f0164e
Add architecture-dependent files for ATMega2560, adjust Makefiles
2020-04-15 09:45:07 -05:00
Dave
192b626be3
More README cleanup
2020-04-14 00:53:27 -05:00
Dave
d08e65bef4
Change ATMega328P to ATMega2560 at top of README
2020-04-14 00:49:44 -05:00
Dave
35d3bfb11b
README cleanups.
2020-04-14 00:49:06 -05:00
Dave
aaf6233723
Silk screen cleanups
2020-04-14 00:29:19 -05:00
Dave
1a9c84aac1
Add Atmega2560-based ASCII interface board
2020-04-13 20:54:56 -05:00
Dave
b135998254
On aligners, moved numpad 0.1825" to the right.
2020-04-13 15:08:55 -05:00
Dave
623a04c6c4
Changed resistor value from "R_US" to 470
2020-04-13 15:08:31 -05:00
Dave
fc4cb08d29
Clean ups
...
- Added comment clarifications
- Moved repeate_state_t definition from asdf_repeat.h to asdf_repeat.c, since
this type is only used internally.
2020-04-09 15:47:27 -05:00
Dave
47bc7c586f
More comment cleanups and clarifications.
...
Rename some variables to clarify use
2020-04-08 15:00:43 -05:00
Dave
644efa7122
Test cleanups
2020-04-08 14:23:13 -05:00
Dave
30cd305fe6
Fix and clarify comments, add COPYING file
2020-04-08 12:41:53 -05:00
Dave
b8fae61ba8
Added footprints for 2u key with cherry aligner
...
- footprints for PCB
- footprints for aligners
2020-04-08 02:05:17 -05:00
Dave
787e49e1d9
Cleanups, use cherry aligners with futaba keys, bump rev number
2020-04-08 02:03:50 -05:00
Dave
e784abe263
Moved mounting slots from keyboard PCB to aligners
...
- This allows the PCB to sink below the mounting brackets. The aligner height can
be adjusted relative to the mounting brackets using spacers.
- changed futaba aligners to use cherry stabilizers.
- bumped rev number
2020-04-08 02:01:14 -05:00
Dave
89bfdd71a9
Move LED current limit resistors to keyboard PCB
...
For better matching of current limit resistors to LEDs, the resistors are moved
to the keyboard matrix PCB, where they can be tuned for maximum brightness (at
100% duty cycle). This allows consistent keyboard brightness when a single
interface PCB is swapped between keyboard matrices.
2020-04-05 20:00:20 -05:00
Dave
4bf0e3eb33
Add series resistors to LEDs and stabilizer to 2u shift
2020-04-05 10:08:14 -05:00
dfnr2
2870130cb5
Swapped text in futaba "main" aligner
2020-03-22 22:08:34 -05:00
David Fenyes
b7f5f29f7b
Put correct DIP switch row in sol keycap definitions for rev 2.3 interface
2020-03-21 14:47:54 -05:00
David Fenyes
e37da4e969
Reset modifier states when keymap is reset
...
- asdf.c: remove asdf_modifiers_init() from asdf_init().
- asdf_keymaps.c: add a call do asdf_modifiers_init()
to asdf_keymaps_select_keymap()
2020-03-21 14:26:57 -05:00
David Fenyes
3cd9547d59
Added aligners for SOL keyboard
...
- options for complete aligner, and split main/numpad aligners
- adjusted aligner spacer mounting holes on PCB.
2020-03-21 12:13:07 -05:00
David Fenyes
869f7c2260
Deleted obsolete files
2020-03-21 12:10:49 -05:00
David Fenyes
0400c08f79
Rename Cherry MX footprint
2020-03-21 11:57:21 -05:00
David Fenyes
0ba921f2ce
Added SOL-20 keymap
...
- Add Keymaps/asdf_keymap_defs_sol.h, and add the hooks in the master keymap
- asdf.h: Change start of ACTION codes to 0xA0, since SOL-20 uses codes from 0x80-0x9a
- asdf_ascii.h: Add named ASCII control codes to
2020-03-21 11:53:51 -05:00
David Fenyes
8f09246a4d
Remove reference to special indicator functions (now virtual)
2020-03-20 14:43:18 -05:00
David Fenyes
b579d70181
remove temporary files
2020-03-18 16:19:43 -05:00
David Fenyes
c91939e6e9
Add silk screen information to cherry aligner.
2020-03-18 16:16:12 -05:00
David Fenyes
91ae8d0bfa
Replace wrong cherry aligner file.
2020-03-18 16:12:05 -05:00
David Fenyes
e60c769824
Add Cherry and Futaba aligners and add text to PCB
2020-03-18 15:52:30 -05:00
David Fenyes
dae4b8d322
Replaced the Virtual out pulse function with long and short pulse
...
- Replace V_PULSE with V_PULSE_LONG and V_PULSE_SHORT functions.
- replace the asdf_arch_pulse_delay() with asdf_arch_pulse_delay_short() and
asdf_arch_pulse_delay_long() functions.
- modify keymaps to use long and short pulses.
- long pulse is 50 ms. Short pulse is 10 us.
- Added localizing prefix to keymap definitions to avoid conflicts.
2020-03-17 01:42:51 -05:00
David Fenyes
58126667d9
Add a header-and-mounting-holes footprint with fewer mounting holes
...
The SOL-20 keyboard doesn't have space for mounting holes right next to the
matrix header, so the new footprint eliminates those mounting holes.
2020-03-16 13:36:19 -05:00