Apple-2-HW/unified_retro_keyboard
1
0
Fork 0
mirror of https://github.com/osiweb/unified_retro_keyboard.git synced 2024-11-18 09:06:49 +00:00
Code Issues Projects Releases Wiki Activity
34f727e1e2
unified_retro_keyboard/hardware/interface-osi
History
Dave e415d43c84 Update addon board updates 
- Add diode to C5 to prevent discharge into 5V

- allow selection of default ON or OFF soft switch.
2020-05-27 19:23:34 -05:00
..
images Add README.md to OSI interface 2020-05-27 13:10:28 -05:00
addon.kicad_pcb Update addon board updates 2020-05-27 19:23:34 -05:00
addon.pro
addon.sch Update addon board updates 2020-05-27 19:23:34 -05:00
interface-osi.pro
interface-osi.sch
README.md Update readme for clarity 2020-05-27 13:12:54 -05:00
Sound.sch
special_keys.sch

README.md

  • OSI Compatible interface

An interface for OSI computers that is compatible with the OSI 542C keyboard, including sound circuits.

This interface also permits substitution of a soft-shiftlock function using a regular momentary keyswitch, instead of the hard-to-fine latchine keyswitch. An LED is provided to indicate SHIFT LOCK status. This interface mates with the Classic ASCII keyboard, configured with the OSI keycaps.

Assembly Rendering

**Construction Notes:

  1. If a diode per key is installed on the keyboard, then omit diodes D1-D8 and install D18.

  2. If the keyboard is not installed with a diode per key, then install D1-D8, and omit D18.

  3. The RESET delay is about 3 seconds with a 6.8 uF capacitor at C20. 4.7 uF gives about 2 seconds, and 3.3 uF gives about a 1 second delay.

  4. If you want to use the sound circuit with an older 540A video board, then on the 540A board, jumper pin 13 of IC E4 to pin 15 of the keyboard connector, and on the OSI interface board, set JP1 to "S1".

  5. If you use a 540B video board, then set JP1 to "/S1"