A2osX/SYS/KERNEL.S.MEM.txt

NEW
PREFIX
AUTO 4,1
*--------------------------------------
ZPMemMgrSPtr 	.EQ ZPMEMMGR			Pointer To Slot selected
ZPMemMgrTmp1	.EQ ZPMEMMGR+2
ZPMemMgrSize	.EQ ZPMEMMGR+4
ZPSListID		.EQ ZPMEMMGR+6
ZPSListIBlkPtr	.EQ ZPMEMMGR+8
ZPSListDBlkPtr 	.EQ ZPMEMMGR+10
ZPSListKeyPtr	.EQ ZPMEMMGR+12
ZPSListDataPtr 	.EQ ZPMEMMGR+14
*/--------------------------------------
* # GetMem0
*  Y,A = Size Requested
* ## RETURN VALUE
*  CC : success
*   YA = PTR to Mem (ZERO Initialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------		
K.GetMem0		ldx #S.MEM.F.INIT0
				.HS 2C					bit abs
*/--------------------------------------
* # GetMem
*  Y,A = Size Requested
* ## RETURN VALUE
*  CC : success
*   YA = PTR to Mem (Uninitialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------
K.GetMem		ldx #0
				
MEM.GetMem.YAX	stx Mem.ReqFlags
				sta ZPMemMgrSize+1

				tya
				bit #$0F				16 bytes aligned ?
				beq .10					yes, request it	
				
				and #$F0				align on 16 bytes
				clc
				adc #$10
				bcc .10
				inc ZPMemMgrSize+1
				
.10				sta ZPMemMgrSize
				
				>LDYAI Mem.Table
				>STYA ZPMemMgrSPtr
				
				ldx #0					Current slot=0

				bra .4					skip slot 0, Check if some free slot to reuse first
				
.1				inx						move to next slot
				jsr Mem.NextSlot
				lda (ZPMemMgrSPtr)		Get Flags
				bmi .4					in use ?
				
.2				lda Mem.ReqFlags		Found an empty slot
				and #S.MEM.F.ALIGN		is request needs a page align ?
				beq .3
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	get LO of PTR
				bne .4					not page-aligned
				
.3				ldy #S.MEM.LEN
				lda (ZPMemMgrSPtr),y	get LEN of this block
				cmp ZPMemMgrSize		compare with requested size
				bne .4
				
				iny
				lda (ZPMemMgrSPtr),y
				cmp ZPMemMgrSize+1
				beq .7					requested size matches slot size !!!
				
.4				cpx Mem.LastSlot		any other slot to check?
				bne .1					last one, create a new slot
				
*-------------- Create a New SLOT

.5				lda Mem.ReqFlags
				and #S.MEM.F.ALIGN		is request needs a page align ?
				beq .6
				
				lda Mem.Free			target PTR will be page aligned ?
				sec
				sbc ZPMemMgrSize
				beq .6					yes, allocate
				
				tay						no, reserve a free slot to fill gap
				lda #0
				jsr Mem.AddSlot			X = new slot
				bcs .9
				
				lda #S.MEM.F.ALIGN		Make sure marked FREE
				sta (ZPMemMgrSPtr)
				
.6				>LDYA ZPMemMgrSize
				jsr Mem.AddSlot			X = new slot
				bcs .9
				
*-------------- Reuse this SLOT

.7				lda Mem.ReqFlags		get requested flags
				ora #S.MEM.F.INUSE		mark as in use
				sta (ZPMemMgrSPtr)
				
				and #S.MEM.F.INIT0
				beq .8

				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	ZPMemMgrSPtr already set
				sta .12+1
				iny
				lda (ZPMemMgrSPtr),y
				sta .12+2
				
				lda ZPMemMgrSize
				eor #$ff
				tay						y=not lo count
				
				lda ZPMemMgrSize+1
				eor #$ff				a=not hi count			
				
				phx
				
				ldx #0
				
.11				iny
				bne .12
				inc
				beq .13
				
.12				stz $ffff,x
				inx
				bne .11
				
				inc .12+2
				bra .11
				
.13				plx

.8				lda #0
				ldy #S.MEM.BIN
				sta (ZPMemMgrSPtr),y
				
				inc						Mark this slot used by one process
				ldy #S.MEM.REFCNT
				sta (ZPMemMgrSPtr),y
				
				ldy #S.PS.PID
				lda (pPs),y
				ldy #S.MEM.OWNERPID
				sta (ZPMemMgrSPtr),y
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y
				pha
				iny
				lda (ZPMemMgrSPtr),y	A = HI PTR
				ply						Y = LO PTR	
				clc						X = Current hMem
				
.9				rts						
*--------------------------------------
Mem.ReqFlags	.BS 1					store requested Flags
*--------------------------------------
* Mem.AddSlot
*  In:
*   Y,A = Requested size
*  Out: 
*--------------------------------------
Mem.AddSlot  	>STYA ZPMemMgrTmp1		save req size
				ldx Mem.LastSlot
				inx
				beq .99					> 255 ERR:OUT OF SLOT
				
				lda Mem.Free			Compute base PTR=FREE-REQ size
				sec
				sbc ZPMemMgrTmp1
				tay						save new Mem.Free LO
				lda Mem.Free+1
				sbc ZPMemMgrTmp1+1
				pha						save new Mem.Free HI				

				cpy Mem.LoMem
				sbc Mem.LoMem+1
				bcc .98					ERR out of mem

				jsr Mem.NextSlot		X,Y unmodified
				
				tya						get back Mem.Free LO
				
				ldy #S.MEM.PTR
				sta Mem.Free			set as system Mem.Free value
				sta (ZPMemMgrSPtr),y	store it as base address of new slot
				iny
				pla						get back Mem.Free HI
				sta Mem.Free+1
				sta (ZPMemMgrSPtr),y

				iny
				lda ZPMemMgrTmp1		get requested size
				sta (ZPMemMgrSPtr),y	setup slot LEN
				iny	
				lda ZPMemMgrTmp1+1
				sta (ZPMemMgrSPtr),y

				stx Mem.LastSlot		mark this slot allocated
				clc
				rts
				
.98				pla						discard new Mem.Free HI
				
.99				lda #E.OOM
				sec
				rts	
*--------------------------------------
Mem.NextSlot	lda ZPMemMgrSPtr
				clc
				adc #S.MEM
				sta ZPMemMgrSPtr
				bcc .8
				inc ZPMemMgrSPtr+1
.8				rts								
*/--------------------------------------
* # FreeMem
*  A = hMem To Free
* ## RETURN VALUE
*  none.
*  (X unmodified)
*\--------------------------------------
K.FreeMem.BAD	pha
				ldy #S.PS.hARGV
				lda (pPS),y
				jsr K.GetMemPtr
				>PUSHYA
				pla
				>PUSHA
				>PUSHBI 3
				phx
				>LDYAI K.FreeMem.ERRBAD
				>SYSCALL printf
				plx
				>DEBUGOA
				sec
				rts
				
K.FreeMem	    tay
				
				beq K.FreeMem.BAD		Slot=0, reserved by Kernel
				cmp Mem.LastSlot
				bcc .10
				bne K.FreeMem.BAD
				
.10				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl K.FreeMem.FREED		In use ?
				
				ldy #S.MEM.REFCNT
				lda (ZPMemMgrSPtr),y	Get count of those referencing this hMem
				dec						only one left ?	
				sta (ZPMemMgrSPtr),y
				bne .8					no, must be a code segment loaded several times
				
				lda (ZPMemMgrSPtr)
				and #S.MEM.F.CODE		CS: Any BINPATH to discard ?
				sta (ZPMemMgrSPtr)		Mark as FREE
				beq .1
				
				ldy #S.MEM.BIN
				lda (ZPMemMgrSPtr),y
				
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl *					***MUST BE ALLOCATED***
				
				lda #0					mark BINPATH slot as free
				sta (ZPMemMgrSPtr)
				
.1				lda Mem.LastSlot
				beq .8
				
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bmi .8					used, exit

.2				dec	Mem.LastSlot		free! get previous....
				beq .80					empty list: go set Mem.Free=Mem.HiMem
				
				lda Mem.LastSlot
				jsr K.GetMemByID		X unmodified
				lda (ZPMemMgrSPtr)
				bpl .2					free again! loop
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y	set Mem.Free... 
				sta Mem.Free
				iny
				lda (ZPMemMgrSPtr),y
				sta Mem.Free+1

.8				clc
				rts
				
.80				>LDYA Mem.HiMem
				>STYA Mem.Free
				clc
				rts
*--------------------------------------				
K.FreeMem.FREED	ldy #S.PS.hARGV
				lda (pPS),y
				jsr K.GetMemPtr
				>PUSHYA
				>PUSHBI 2
				phx
				>LDYAI K.FreeMem.ERRFREED
				>SYSCALL printf
				plx
				>DEBUGOA
				sec
				rts
*--------------------------------------
K.FreeMem.ERRBAD	.AZ "FreeMem:%h=Bad hMem,BIN=%s\r\n"
K.FreeMem.ERRFREED	.AZ "FreeMem:hMem already freed,BIN=%s\r\n"
*/--------------------------------------
* # GetMemPtr
* A = hMem
* ## RETURN VALUE
* Y,A = PTR to MemBlock
* (X unmodified)
*\--------------------------------------
* Optimized for :
* Mem.Table is page aligned at $1800
* S.MEM is 8 bytes
*--------------------------------------
				.DO Mem.Table=$1800
				.ELSE
				!!!!!WARNING!!!!!
				.FIN
				.DO S.MEM=8
				.ELSE
				!!!!!WARNING!!!!!
				.FIN
*--------------------------------------
K.GetMemPtr		sta ZPMemMgrSPtr
				lda /Mem.Table/8
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				sta ZPMemMgrSPtr+1
				
				ldy #S.MEM.PTR
				lda (ZPMemMgrSPtr),y
				pha
				iny
				lda (ZPMemMgrSPtr),y
				ply
				rts
*/--------------------------------------
* # GetMemByID
* A = hMem
* ## RETURN VALUE
* Y,A = ZPMemMgrSPtr = PTR to S.MEM
* (X unmodified)
*\--------------------------------------
K.GetMemByID	sta ZPMemMgrSPtr
				lda /Mem.Table/8
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				asl ZPMemMgrSPtr
				rol
				sta ZPMemMgrSPtr+1
				ldy ZPMemMgrSPtr
				rts
*/--------------------------------------
* # GetMemStat
* **In:**
*  Y,A = Ptr to 24 bytes buffer
* ## RETURN VALUE
*  Buffer filled with memory stats
*\--------------------------------------
K.GetMemStat	>STYA ZPMemMgrTmp1

				ldy #22
				ldx #6
				
.1				lda DevMgr.Stat,x
				sta (ZPMemMgrTmp1),y
				dey
				dex
				bpl .1
				
				sta SETREADAUX
				
				ldy #14
				jsr .2
				
				sta CLRREADAUX
				
				ldy #6
				
.2				ldx #6
				
.3				lda Mem.Table,x
				sta (ZPMemMgrTmp1),y
				dey
				dex
				bpl .3
				rts
*/--------------------------------------
* # NewStr
* Create a new copy of this C-String
* Y,A = Ptr to source C-String
* ## RETURN VALUE
* CC : success 
*  Y,A = PTR to String
*  X = hMem (PSTR)
* CS : error
*  A = SYS error code
*\--------------------------------------
K.NewStr		>STYA .1+1
				>STYA .4+1
				
				ldy #0
				lda #0
				
.1				ldx $ffff,y
				beq .2
				iny
				bne .1
				inc
				inc .1+2
				bne .1
				
.2				iny						Add one for ending 0
				bne .3
				inc 
						
.3				jsr K.GetMem
				bcs .9
				>STYA .5+1
				
				phy
				pha
				
				ldy #0
				
.4				lda $ffff,y			
.5				sta $ffff,y
				beq .8
				iny
				bne .4
				
				inc .4+2
				inc .5+2
				bne .4
				
.8				pla
				ply
				clc
.9				rts				
*/--------------------------------------
* # SListGetByID
*  PUSHB = hSList
*  PUSHW = KeyID
*  PUSHW = Data Ptr
*  PUSHW = Key Ptr
* ## RETURN VALUE
*  X,Y = Next KeyID
*\--------------------------------------
K.SListGetByID	>PULLW ZPSListKeyPtr
*/--------------------------------------
* # SListUpdateByID
*  PUSHB = hSList
*  PUSHW = KeyID
*  PUSHW = Data Ptr
* ## RETURN VALUE
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListUpdateByID	
				>PULLW ZPSListDataPtr
				>PULLW ZPSListID
				bra K.SListPullH
*/--------------------------------------
* # SListAdd
*  PUSHB = hSList
*  PUSHW = Key Ptr
*  PUSHW = Data Ptr
* ## RETURN VALUE
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListAdd		
*/--------------------------------------
* # SListLookup
*  PUSHB = hSList
*  PUSHW = Key Ptr
*  PUSHW = Data Ptr
* ## RETURN VALUE
*  A = Key Length
*  X,Y = KeyID
*\--------------------------------------
K.SListLookup	
*--------------------------------------
				>PULLW ZPSListDataPtr
				>PULLW ZPSListKeyPtr
K.SListPullH	>PULLA
*/--------------------------------------
* # SListNew
* ## RETURN VALUE
*  A=hSList
*\--------------------------------------
K.SListNew	
*/--------------------------------------
* # SListFree
*  A=hSList
* ## RETURN VALUE
*\--------------------------------------
K.SListFree	
*--------------------------------------
				sta SETREADAUX
				sta SETWRITEAUX
				jsr X.SLIST
				sta CLRREADAUX
				sta CLRWRITEAUX
				rts
*/--------------------------------------
* # GetStkObjProp
*  A = hObject (AUX Memory)
*  Y = Property Index
* ## RETURN VALUE
*  Y,A = Property Value
*\--------------------------------------
K.GetStkObjProp	phy
				sta SETREADAUX
				jsr K.GetMemPtr
				>STYA ZPMemMgrTmp1
				
				ply
				lda (ZPMemMgrTmp1),y
				pha
				iny
				lda (ZPMemMgrTmp1),y
				ply
				sta CLRREADAUX
				rts
*/--------------------------------------
* # NewStkObj
*  Y,A = Size Requested
* ## RETURN VALUE
*  CC : success
*   YA = PTR to Mem (Uninitialised)
*	X = hMem
*  CS :
*   A = EC
*\--------------------------------------
K.NewStkObj		ldx #SYS.GetMem
				.HS 2C					BIT ABS
*/--------------------------------------
* # FreeStkObj
*  A = hMem To Free (AUX Memory)
* ## RETURN VALUE
*  none.
*  (X,Y unmodified)
*\--------------------------------------
K.FreeStkObj	ldx #SYS.FreeMem

MEM.GoStkObj	sta SETREADAUX
				sta SETWRITEAUX
				
				jsr	.1
				
				sta CLRREADAUX
				sta CLRWRITEAUX
				rts

.1				jmp (SYS.Kernel.JMP,x)
*/--------------------------------------
* # LoadStkObj
* Load a file in AUX memory (Stock Objects)
*  PUSHW = AUXTYPE (Handled by....
*  PUSHB = TYPE  ...
*  PUSHB = MODE  ...
*  PUSHW = PATH ...FOpen)
* ## RETURN VALUE
*  Y,A = File Length
*  X = hMem of Loaded Object in AUX mem
*\--------------------------------------
K.LoadStkObj	>SYSCALL LoadFile
				bcs .99
				
				stx .8+1				Save MAIN hMem
				>STYA A2L				Save LEN temporarly
				
				jsr K.NewStkObj
				bcs .9
				stx .80+1
				>STYA A4L				Save Destination Address in AUX
				
				lda .8+1
				jsr K.GetMemPtr
				
				>STYA A1L				Save MAIN base Ptr
				
				pha						Add Allocated LEN
				tya
				clc
				adc A2L
				sta A2L
				pla
				adc A2L+1
				sta A2L+1				to get End address in A2L/H

				sec						Main To Aux
				jsr AuxMove
				
.8				lda #$ff				SELF MODIFIED
				jsr K.FreeMem			release MAIN memory
				
.80				lda #$ff				Returns AUX hMem
				rts
				
.9				pha
				jsr .8
				pla
				sec
.99				rts				
*--------------------------------------
MEM.GetKeyCharY	sta CLRREADAUX
				lda (ZPSListKeyPtr),y
				sta SETREADAUX
				beq MEM.IsDigit.9
				
MEM.IsIDValid	cmp #'.'
				beq MEM.IsDigit.8

				cmp #'_'
				beq MEM.IsDigit.8
				
MEM.IsDigitOrL	cmp #'z'+1
				bcs MEM.IsDigit.RTS
				cmp #'a'
				bcs MEM.IsDigit.8
				
MEM.IsDigitOrUC	cmp #'Z'+1
				bcs MEM.IsDigit.RTS
				cmp #'A'
				bcs MEM.IsDigit.8

MEM.IsDigit		cmp #'9'+1
				bcs MEM.IsDigit.RTS
				cmp #'0'
				bcs MEM.IsDigit.8

MEM.IsDigit.9	sec
				
MEM.IsDigit.RTS	rts
				
MEM.IsDigit.8	clc
				rts
*--------------------------------------
MEM.IsHexDigit	jsr MEM.IsDigit
				bcc .8
				
				cmp #'A'
				bcc MEM.IsDigit.9
				cmp #'F'+1
				bcc .1
				
				cmp #'a'
				bcc MEM.IsDigit.9
				cmp #'f'+1
				bcs MEM.IsDigit.RTS

				eor #$20			
.1					
*				clc
				sbc #'A'-11			cc so A->10 (11-CC)
				clc
				
.8				and #$0F					
				rts
*--------------------------------------
MEM.SetKeyCharY	sta CLRWRITEAUX
				sta (ZPSListKeyPtr),y
				sta SETWRITEAUX
				rts
*--------------------------------------
MEM.GetDataByte	sta CLRREADAUX
				lda (ZPSListDataPtr)
				sta SETREADAUX
				bra MEM.SetDataByte.1
*--------------------------------------
MEM.SetDataByte	sta CLRWRITEAUX
				sta (ZPSListDataPtr)
				sta SETWRITEAUX
MEM.SetDataByte.1				
				inc ZPSListDataPtr
				bne .8
				inc ZPSListDataPtr+1
.8				rts
*--------------------------------------
MEM.TXTPTR.GetNext
				sta CLRREADAUX
				lda (TXTPTR)
				sta SETREADAUX
				beq .9
				inc TXTPTR
				bne .9
				inc TXTPTR+1
.9				rts				
*--------------------------------------
MEM.SPtr1PPtr2	>STYA ZPPtr1
				>PULLW ZPPtr2
				rts
*--------------------------------------
MEM.GetCharPtr1	lda (ZPPtr1)
				beq MEM.GetCharPtr1.8
MEM.NextCharPtr1				
				inc ZPPtr1
				bne MEM.GetCharPtr1.8
				inc ZPPtr1+1			never Z
MEM.GetCharPtr1.8
				rts
*--------------------------------------
MEM.PutCharPtr2	sta (ZPPtr2)
				inc ZPPtr2
				bne .8
				inc ZPPtr2+1
.8				rts
*/--------------------------------------
* # GetPSStat
* **In:**
*  Y,A = Ptr to K.PS.MAX*2+1 bytes buffer
* ## RETURN VALUE
*  Buffer filled with PS stats
*\--------------------------------------
K.GetPSStat		>STYA ZPPtr1

				ldx #0
				
				ldy #1
				lda CORE.InKernelStats
				sta (ZPPtr1),y
				
				iny
				
.1				lda PS.Table.PID,x
				beq .2
				
				lda PS.Table.hPS,x
				sta (ZPPtr1),y
				iny

				lda PS.Table.Stats,x
				sta (ZPPtr1),y
				iny
				
.2				inx
				cpx #K.PS.MAX
				bne .1
				
.9				tya
				lsr
				dec
				sta (ZPPtr1)
				rts
*--------------------------------------
* 6502/65C02/65816 OPCODES
* Bit 3 	: 1 = absolute addressing
* Bit 2-1-0 : opcode + @ length
*--------------------------------------
*					0.1.2.3.4.5.6.7.8.9.A.B.C.D.E.F
BIN.65816		
*	TO DO : Make 2 different tables
* http://axis.llx.com/~nparker/a2/opcodes.html
*--------------------------------------
* 65R02 OPCODES
*--------------------------------------
*					0.1.2.3.4.5.6.7.8.9.A.B.C.D.E.F
BIN.65R02		.HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
				.HS B.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
				.HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
				.HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
				.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
*--------------------------------------
MAN
SAVE USR/SRC/SYS/KERNEL.S.MEM
LOAD USR/SRC/SYS/KERNEL.S
ASM