NEW
  AUTO 3,1
				.LIST OFF
				.OP	65C02
				.OR	$2000
				.TF sys/pm.ramworks
*--------------------------------------
				.INB inc/macros.i
				.INB inc/io.i
				.INB inc/monitor.i
				.INB inc/mli.i
				.INB inc/mli.e.i
*--------------------------------------
TmpPtr1			.EQ	$0
TmpPtr2			.EQ	$2
Type			.EQ $4
*--------------------------------------
RW.SAVEZP0		.EQ $2800
RW.SAVEZP1		.EQ $2900
*--------------------------------------
RW.BLOCK		.EQ $2A00
RW.ONLINEBUFFER	.EQ $2C00
*--------------------------------------
* A2OSX.SYSTEM relocated at $1000 !!!
*--------------------------------------
SEBankSelect	.EQ $C071
RWBankSelect	.EQ $C073
*--------------------------------------
RW.Init			>LDYAI RW.MSG
				jsr PrintFYA

				jsr RW.CheckRAM3
				bcs .5
				
				>LDYAI RW.MSG.RAM3OK
				jsr PrintFYA
				rts

.5				jsr RW.DisableRAM
				bcc .10

				>LDYAI RW.MSG.RAMDISKO
				jsr PrintFYA
				rts

.10				>LDYAI RW.MSG.RAMDISOK
				jsr PrintFYA
				
				lda #RWBankSelect
				jsr RW.DetectHW
				bcc .1

				lda #SEBankSelect
				jsr RW.DetectHW
				bcc .1

				>LDYAI RW.MSG.KO1
				bra .9

.1				tay						save RAM drive pages

				pha

				lsr						divide by 4 to compute KB size
				ror .12+1
				lsr
				ror .12+1

.12				ldx #$00				X,A = RAM drive size
				phx						Push Kbyte LO
				pha						Push Kbyte HI

				tya
				inc						+ 1 page AUX mem

				pha						Total page detected

				lsr						divide by 4 to compute KB size
				ror .11+1
				lsr
				ror .11+1

.11				ldx #$00				X,A = Total KB detected
				phx						Push Kbyte LO
				pha						Push Kbyte HI

				>LDYAI RW.MSG.OK1
				jsr PrintFYA

				jsr RW.Install
				bcc .2

				>LDYAI RW.MSG.KO2
				bra .9

.2				>LDYAI RW.MSG.OK2
				jsr PrintFYA

				jsr RW.Format
				bcc .3

				>LDYAI RW.MSG.KO3
				bra .9

.3				>LDYAI RW.MSG.OK3

.9				jsr PrintFYA
				rts
*--------------------------------------
RW.CheckRAM3	jsr RW.ONLINE			MLI Online at S3D2
				bcs .9

				lda RW.ONLINEBUFFER
				and #$0F

				cmp #4					'RAM3' ?
				sec
				bne .9

				tax

.1				lda RW.ONLINEBUFFER,x
				eor RW.MSG.RAM3OK,x
				asl						ignore b7
				bne .9

				dex
				bne .1

				clc
.9				rts
*--------------------------------------
RW.DisableRAM	lda DEVPTRS3D2
				cmp DEVPTRS				S0D1=NOVEV				
				bne .1

				lda DEVPTRS3D2+1
				cmp DEVPTRS+1			S0D1=NODEV
				beq .8					S3D2=NODEV, nothing to do

.1				ldx DEVCNT

.2				lda DEVLST,x			LOOKING FOR $BF, $BB, $B7, $B3
				and #$F3
				cmp #$B3
				beq .3

				dex
				bpl .2

				sec						No device found, exit with error
				rts

.3				cpx DEVCNT
				beq .5

.4				lda DEVLST+1,x
				sta DEVLST,x
				inx
				cpx DEVCNT
				bne .4

.5				ldx DEVCNT
				stz DEVLST,x
				dec DEVCNT
				lda DEVPTRS
				sta DEVPTRS3D2
				lda DEVPTRS+1
				sta DEVPTRS3D2+1

				jsr RW.ONLINE

.8				clc						Success!!
				rts
*--------------------------------------
RW.ONLINE		jsr MLI
				.DA #MLIONLINE
				.DA RW.ONLINEPARAM
				rts
*--------------------------------------
RW.ONLINEPARAM	.DA #2
				.DA #$B0				Slot 3,Drive 2
				.DA RW.ONLINEBUFFER
*--------------------------------------
RW.DetectHW		php
				sei
				sta Type
				sta .1+1
				sta .2+1
				sta .3+1
				sta .6+1
				
				sta SETALTZP

				ldx #0					start detection at page $00

.1				stx RWBankSelect
				lda 0
				sta RW.SAVEZP0,x		save Bank 0 $0000 to prevent ALTZP trash
				lda 1
				sta RW.SAVEZP1,x
				inx
				bpl .1

				lda #0

.2				sta RWBankSelect
*--------------------------------------
* Added after David Finnigan from macgui.com testing sessions
*
				pha
				pla
*
* to address possibly a timing issue with Accelerators
*--------------------------------------
				sta 0
				eor #$FF
				sta 1
				eor #$FF
				inc
				bpl .2

				ldx #0

.3				stx RWBankSelect
*--------------------------------------
* Added after David Finnigan from macgui.com testing sessions
*
				pha
				pla
*
* to address possibly a timing issue with Accelerators
*--------------------------------------
				lda 0
				tay
				eor #$ff
				cmp 1
				bne .4

				inx

				cpy #127
				bne .3

.4				ldy #127				X = detected page count

.6				sty RWBankSelect

				lda RW.SAVEZP0,y
				sta 0
				lda RW.SAVEZP1,y
				sta 1
				dey
				bpl .6

				sta CLRALTZP
				plp

				txa						PGCNT > 0 ?
				beq .9

				dec						minus 1 for AUX mem
				beq .9

				sta	RW.PGCNT			PGCNT = last detected page

				clc
				rts

.9				sec
				rts
*--------------------------------------
RW.Install		lda RRAMWRAMBNK1
				lda RRAMWRAMBNK1

				ldx #RWDRV.SIZE

.1				lda RWDRV.B.START-1,x
				sta RWDRV.START-1,x
				dex
				bne .1

				lda RW.PGCNT
				lsr
				sta RWDRV.MAXHI+1

				lda #0
				ror
				sta RWDRV.MAXLO+1

				lda Type
				sta RWDRV.IO1+1
				sta RWDRV.EXIT+1

				lda RROMBNK1

				sta SETWRITEAUX

				ldx #RWDRVX.SIZE

.2				lda RWDRVX.B.START-1,x
				sta RWDRVX.START-1,x
				dex
				bne .2

				lda Type
				sta RWDRVX.XM.IO1+1
				sta RWDRVX.XM.IO2+1
				sta RWDRVX.XM.IO3+1

				sta CLRWRITEAUX
				inc DEVCNT
				ldx DEVCNT
				lda #$B0				Slot 3,Drive 2,0=Not Removable, 0=no int, 00=1 Volume
				sta DEVLST,x

				lda #RWDRV.START
				sta DEVPTRS3D2
				lda /RWDRV.START
				sta DEVPTRS3D2+1

				clc
				rts
*--------------------------------------
RW.Format		jsr RW.BLOCK.SET00
				lda RW.PGCNT
				lsr
				sta RW.BLOCK2.TB+1
				lda #0
				ror
				sta RW.BLOCK2.TB
				jsr MLI
				.DA #MLIGETTIME
				.DA 0
				ldx #3
.1				lda DATELO,x
				sta RW.BLOCK2.CT,x
				dex
				bpl .1
				ldx #RW.BLOCK2.END-RW.BLOCK2
.2				lda RW.BLOCK2-1,x
				sta RW.BLOCK-1,x
				dex
				bne .2

				jsr MLI					Write Block 2,First VOL directory block
				.DA #MLIWRITEBLOCK
				.DA RW.MLIWRITEBLOCK
				bcc .22
				rts
*--------------------------------------
.22				jsr RW.BLOCK.SET00

				lda #2
				sta RW.BLOCK			LO byte of previous block pointer

				inc RW.MLIWRITEBLOCK.BLK
				jsr MLI					Write Block 3,Last VOL directory block
				.DA #MLIWRITEBLOCK
				.DA RW.MLIWRITEBLOCK
				bcc .33
				rts
*--------------------------------------
.33				lda RW.PGCNT			divide RW.PGCNT by 32 to get how many bitmap
				lsr						blocks we need :
				lsr						1 page = 128 blocks = 16 bytes
				lsr						32 pages = 512 bytes = 1 Block
				lsr
				lsr
				sta RW.FBITMAPCNT		store FULL bitmap block count needed

				tax
				lda RW.PGCNT
				and #$1F				need an extra incomplete bitmap block?
				beq .3
				inx
.3				stx RW.BITMAPCNT		store TOTAL bitmap block needed

.4				lda RW.FBITMAPCNT
				beq .49
				dec RW.FBITMAPCNT
				jsr RW.BLOCK.SETFF

				bra .5

.49				jsr RW.BLOCK.SET00
				lda RW.PGCNT
				and #$1F				compute incomplete bitmap block
				asl
				asl
				asl
				asl						times 16 for byte count
				tay
				lda #$FF
				bcc	.42					first half of block only

				ldx #0
.40				sta RW.BLOCK,x
				inx
				bne .40

				cpy #0
				beq .5

.41				sta RW.BLOCK+$ff,y
				dey
				bne .41

				bra .5

.42				sta RW.BLOCK-1,y
				dey
				bne .42

.5				inc RW.MLIWRITEBLOCK.BLK
				lda RW.MLIWRITEBLOCK.BLK
				cmp #4					Are we writing first volume bitmap ?
				bne .63					no, regular one

*				lda #$CF				Mark Block 0 & 1 free, 2,3 used (vol hdr)
				lda #$0F
				sta RW.BLOCK

				ldy #0
				lda #$8					Start a BLOCK 4 (%00001000)
				ldx RW.BITMAPCNT

.62				pha
				eor RW.BLOCK,y			Mark bitmap blocks as "used"
				sta RW.BLOCK,y
				pla
				dex
				beq .63

				lsr
				bne .62

				lda #$80
				iny
				bra .62

.63				jsr MLI					Write Block 4,5...
				.DA #MLIWRITEBLOCK
				.DA RW.MLIWRITEBLOCK
				bcs .9

				dec RW.BITMAPCNT		another bitmap block needed ?
				bne .4

				clc
.9				rts
*--------------------------------------
RW.BLOCK.SETFF	lda #$FF
				.HS 2C					BIT ABS

RW.BLOCK.SET00	lda #$00

				ldx #0

.1				sta	RW.BLOCK,x
				sta RW.BLOCK+$100,x
				inx
				bne .1

				rts
*--------------------------------------
RW.MLIWRITEBLOCK
				.DA #3
				.DA #$B0				Slot 3,Drive 2
				.DA RW.BLOCK
RW.MLIWRITEBLOCK.BLK
				.DA 2					Start writing block at #2
*--------------------------------------
RW.PGCNT		.BS 1
RW.FBITMAPCNT	.BS 1
RW.BITMAPCNT	.BS 1
*--------------------------------------
RW.BLOCK2		.DA 0					pointer to previous block
				.DA 3					pointer to next block
				.DA #$F4				$F=Vol Dir Header, 4=name len
				.AS 'RAM3'
				.BS 11					(RAM3 len=4, fill to 15)
				.HS 0000000000000000
RW.BLOCK2.CT	.BS 4					Creation time
				.HS 0100C3270D			version/min version/access/EL/EPB
				.DA 0					File Count
				.DA 4					bitmap pointer (Block 2&3 are Volume directory)
RW.BLOCK2.TB	.BS 2					Total Blocks
RW.BLOCK2.END	.EQ *
*--------------------------------------
				.INB usr/src/shared/x.printf.s
*--------------------------------------
RW.MSG			.CZ "SuperExpander E, RAMWorks (I,II,III,z-Ram) Driver For A2osX\r"
RW.MSG.RAMDISOK	.CZ "/RAM Device Disabled/Not Present.\r"
RW.MSG.RAMDISKO	.CZ "Problem Disabling /RAM Device.\r"
RW.MSG.RAM3OK	.CZ "/RAM3 Device Already Installed.\r"
RW.MSG.OK1		.CZ "%D KB Detected (%d Pages), %D KB (%d Pages) Available for RamDrive.\r"
RW.MSG.KO1		.CZ "Not Detected.\r"
RW.MSG.OK2		.CZ "RamWorks Driver Installed.\r"
RW.MSG.KO2		.CZ "RamWorks Driver Install Error.\r"
RW.MSG.OK3		.CZ "RamWorks Drive Formatted as /RAM3.\r"
RW.MSG.KO3		.CZ "RamWorks Drive Format Error.\r"
*--------------------------------------
* Driver for Ramworks in main LC
* $FF00 -> $FF9A (Inclusive)
* $FF58	MUST BE $60 (RTS)
* DO NOT trash DRV.COMMAND...DRV.BLKNUM as ProDOS
* reuses it after Block operation
* A1,A2 are used by Disk II Driver,
* so we use it safely as Tmp Ptr
*--------------------------------------
DRV.A2L			.EQ $3E
DRV.A2H			.EQ $3F
DRV.COMMAND 	.EQ $42
DRV.BUFF		.EQ $44
DRV.BLKNUM		.EQ $46
*--------------------------------------
RWDRV.B.START	.PH	$FF00
RWDRV.START		ldy DRV.COMMAND			0 = Status ?
				beq RMDRV.CMDSTATUS

				cpy #3

				beq RWDRV.EXITOK		3 = Format : nothing to do, exit with no error
				bcs RWDRV.IOERR			> 3 = Invalid OP, IO error

				ldx DRV.BLKNUM
				cpx RWDRV.MAXLO+1
				lda DRV.BLKNUM+1
				sbc RWDRV.MAXHI+1
				bcs	RWDRV.IOERR			DRV.BLKNUM >= RW.DRV.SIZE, IO error

				bit RD80STORE			save 80 Store status

				php						Disable IRQ as no vector set in RW Banks
				sei

				sta CLR80STORE			make sure SETREADAUX/SETWRITEAUX effective everywhere

				txa						Get Back DRV.BLKNUM
				asl						compute PAGE = blocknumLO *2
				pha
				lda DRV.BLKNUM+1		compute BANK = blocknumHI *2
				rol
				inc 					+1 for skipping Aux BANK 0

				plx						move page into X
				beq RWDRV.GOAUX			move from/to aux page0/1

				cpx #$C0
				bcs RWDRV.GOAUX			move from/to aux LC
*--------------------------------------
* X=Page($02 -> $BF),A=Bank,Y=CMD
*--------------------------------------
RWDRV.IO1		sta RWBankSelect		Select RAMWorks Bank

				inx						second 256 bytes first
				stx DRV.A2H				Use DRV.A1L/H for RAM PTR
				stz DRV.A2L
				inc DRV.BUFF+1
				dey						Y=CMD, zero if read
				bne RWDRV.W				non zero, go write

				sta SETREADAUX
				ldx #DRV.A2L			READ:copy from RAM to BUFF
				lda #DRV.BUFF
				bra RWDRV.RW

RWDRV.W			sta SETWRITEAUX
				ldx #DRV.BUFF
				lda #DRV.A2L			WRITE:copy from BUFF to RAM
				dey						Make sure Y=0 for main loop below

RWDRV.RW		stx RWDRV.RW.SRC+1
				sta RWDRV.RW.DST+1

*				clc						2 pages to copy
				.HS B0					BCS
RWDRV.RW.LOOP	sec

RWDRV.RW.SRC	lda ($FF),y
RWDRV.RW.DST	sta ($FF),y
				iny
				bne RWDRV.RW.SRC

				dec DRV.BUFF+1
				dec DRV.A2H
				bcc RWDRV.RW.LOOP

RWDRV.EXIT		stz RWBankSelect
				sta CLRREADAUX
				sta CLRWRITEAUX

				plp						restore IRQ

				bpl RMDRV.CMDSTATUS
				sta SET80STORE

RMDRV.CMDSTATUS
RWDRV.MAXLO		ldx #$FF				return device block count in X,Y...
RWDRV.MAXHI		ldy #$FF
RWDRV.EXITOK	lda #0					make A=0
				clc
				rts

RWDRV.IOERR		lda #MLI.E.IO			Carry already set
				rts
*--------------------------------------
* X=Page(0/1 or LC),A=Bank
*--------------------------------------
RWDRV.GOAUX		pha						save BANK
				sta SETWRITEAUX

				ldy #RWDRVX.XM.SIZE		Backup begining of $300 to generate move code

.1				lda RWDRV.XM.RUN-1,y
				sta RWDRVX.XM.SAVE-1,y
				dey
				bne .1

				pla						restore BANK

				sta SETREADAUX
				jsr RWDRVX.START		Setup Code in main mem at $300 for data move
*										returns : CC=WRITE, CS=READ
				sta CLRREADAUX			CLRWRITEAUX already triggered by code copy
				jsr RWDRV.XM.RUN		Now execute generated code in main memory

				sta SETREADAUX
				jmp RWDRVX.RESTORE

RWDRV.END		.EP
RWDRV.B.END
				.LIST ON
RWDRV.SIZE		.EQ RWDRV.B.END-RWDRV.B.START
				.LIST OFF
*--------------------------------------
* Driver for Ramworks in aux memory
* $0200 -> $02FF TMP buffer for PAGE copy
* $0300 -> $03FD (Inclusive)
* do not trash $03FE-$03FF (IRQ Vector)
* X=Page(0/1 or LC),A=Bank
*--------------------------------------
RMDRVX.TMP		.EQ $200
RWDRV.XM.RUN	.EQ $300
*--------------------------------------
RWDRVX.B.START	.PH	$0300
RWDRVX.START	sta RWDRVX.XM.BANK+1	setup BANK

				lda	DRV.COMMAND			DRV.COMMAND: 1=READ,2=WRITE
				lsr
				php

				ldy #RRAMWRAMBNK1

				txa
				beq .1					page 0/1, no need to check BANK

				cmp #$D0				$C0 <= PAGE < $D0 ?
				bcs .1					no, store in BNK1

				ora #$10				Remap $C0 page to $D0 BNK2

				ldy #RRAMWRAMBNK2

.1				sty RWDRVX.XM.RWLC+1	Save to select proper RW bank later

				ldy DRV.BUFF
				ldx DRV.BUFF+1
				
				plp
				bcc .2					CC=WRITE, CS=READ

				stz RWDRVX.XM.SRC+1		READ from src LO = 0
				sta RWDRVX.XM.SRC+2		READ from src HI = PAGE
				
				sty RWDRVX.XM.DST+1		WRITE to DRV.BUFF
				stx RWDRVX.XM.DST+2
				bra .3

.2				sty RWDRVX.XM.SRC+1		READ from DRV.BUFF
				stx RWDRVX.XM.SRC+2
				
				stz RWDRVX.XM.DST+1		WRITE to dst LO = 0
				sta RWDRVX.XM.DST+2		WRITE to dst HI = PAGE

.3				sta CLRWRITEAUX

				ldy #RWDRVX.XM.SIZE

.4				lda RWDRVX.XM.START-1,y
				sta RWDRV.XM.RUN-1,y
				dey
				bne .4

				rts
*--------------------------------------
* Called form Main LC after RWDRVX.XM execution
*--------------------------------------
RWDRVX.RESTORE	ldy #RWDRVX.XM.SIZE		Now, restore begining of $300

.1				lda RWDRVX.XM.SAVE-1,y
				sta RWDRV.XM.RUN-1,y
				dey
				bne .1

				jmp RWDRV.EXIT
*--------------------------------------
* LC Copy Code, moved from Aux to main $300
* $0200 -> $02FF TMP buffer for 2 steps move between LCs
* CC=WRITE :
* CS=READ :
*--------------------------------------
RWDRVX.XM.START	ldy #2					2 pages to copy

RWDRVX.XM.COPY	sta CLRALTZP

				jsr RWDRV.XM.RUN+RWDRVX.XM.SRCLC-RWDRVX.XM.START
				sta $C000,x				select proper Main/Aux ZP/LC
RWDRVX.XM.IO1	sta RWBankSelect

				ldx #0

RWDRVX.XM.SRC	lda $FFFF,x
				sta RMDRVX.TMP,x
				inx
				bne RWDRVX.XM.SRC

				sta CLRALTZP

				jsr RWDRV.XM.RUN+RWDRVX.XM.DSTLC-RWDRVX.XM.START
				sta $C000,x				select proper Main/Aux ZP/LC
RWDRVX.XM.IO2	sta RWBankSelect

				ldx #0

RWDRVX.XM.2		lda RMDRVX.TMP,x
RWDRVX.XM.DST	sta $FFFF,x
				inx
				bne RWDRVX.XM.2

				inc RWDRV.XM.RUN+RWDRVX.XM.SRC+2-RWDRVX.XM.START
				inc RWDRV.XM.RUN+RWDRVX.XM.DST+2-RWDRVX.XM.START
				dey
				bne RWDRVX.XM.COPY

				sta CLRALTZP
RWDRVX.XM.IO3	stz RWBankSelect
*--------------------------------------
RWDRVX.XM.MNLC	bit RRAMWRAMBNK1		ProDOS always uses LCBANK1

				lda #0

				ldx #CLRALTZP

				rts
*--------------------------------------
RWDRVX.XM.SRCLC	bcc RWDRVX.XM.MNLC		CC=WRITE,CS=READ?
				.HS 2C					BIT ABS
RWDRVX.XM.DSTLC	bcs RWDRVX.XM.MNLC		CC=WRITE,CS=READ?
*--------------------------------------
RWDRVX.XM.RWLC	bit $C000

RWDRVX.XM.BANK	lda #$FF

				ldx #SETALTZP

				rts
*--------------------------------------
				.LIST ON
RWDRVX.XM.SIZE	.EQ	*-RWDRVX.XM.START
				.LIST OFF
*--------------------------------------
RWDRVX.XM.SAVE	.BS RWDRVX.XM.SIZE
*--------------------------------------
				.EP
*--------------------------------------
RWDRVX.B.END	.LIST ON
RWDRVX.SIZE		.EQ	RWDRVX.B.END-RWDRVX.B.START
				.LIST OFF
*--------------------------------------
* CONTROL SECTION :
*--------------------------------------
				.DO RWDRV.SIZE>$9B
				ERROR:RWDRV.SIZE too big
				.FIN
				.DO RWDRVX.SIZE>$FE
				ERROR:RWDRVX.SIZE too big
				.FIN
				.DO RWDRVX.XM.SIZE>$F0
				ERROR:RWDRVX.XM.SIZE too big
				.FIN
*--------------------------------------
MAN
SAVE usr/src/sys/pm.ramworks.s
ASM