NEW AUTO 3,1 .OP 65C02 .OR $2000 *-------------------------------------- .DO SSCIRQ=1 .TF DRV/SSC.I.DRV .ELSE .TF DRV/SSC.DRV .FIN *-------------------------------------- .DO SSCIRQ=1 BUF.SIZE .EQ $40 BUF.MASK .EQ $3F .FIN *-------------------------------------- ZPArgPtr .EQ ZPBIN ZPParityPtr .EQ ZPBIN+2 ZPControlPtr .EQ ZPBIN+4 ZPhParity .EQ ZPBIN+6 ZPhControl .EQ ZPBIN+7 *-------------------------------------- * File Header (16 Bytes) *-------------------------------------- CS.START cld jmp Dev.Detect cld,jmp abs=DRV .DA #$61 6502,Level 1 (65c02) .DA #1 DRV Layout Version 1 .DA 0 .DA CS.END-CS.START Code Length .DA 0 .DA #32 SS .DA #8 ZP .DA 0 *-------------------------------------- * Relocation Table *-------------------------------------- L.MSG.DETECT .DA MSG.DETECT L.MSG.DETECT.OK .DA MSG.DETECT.OK L.MSG.DETECT.KO .DA MSG.DETECT.KO L.DRV.CS.START .DA DRV.CS.START L.FD.DEV .DA FD.DEV L.FD.DEV.NAME .DA FD.DEV.NAME L.SSCANF.ARGS .DA SSCANF.ARGS L.DCB.BAUD .DA DCB+S.DCB.COM.BAUD L.DCB.DATA .DA DCB+S.DCB.COM.DATA L.DCB.STOP .DA DCB+S.DCB.COM.STOP .DA 0 End Of Reloc Table *-------------------------------------- Dev.Detect >STYA ARGS >LDYA L.MSG.DETECT >SYSCALL PutS stz ZPArgPtr lda #$C1 sta ZPArgPtr+1 .1 and #$0f tay lda A2osX.S,y bne .3 ldx #DEVSIG.Length-1 .2 ldy DEVSIG.Offset,x lda (ZPArgPtr),y cmp DEVSIG.Value,x bne .3 dex bpl .2 bra .4 .3 inc FD.DEV.NAME+3 inc ZPArgPtr+1 no match, try next slot.... lda ZPArgPtr+1 cmp #$C8 bne .1 >LDYA L.MSG.DETECT.KO >SYSCALL PutS lda #MLI.E.NODEV Not Found in any slot, exiting sec rts .4 lda ZPArgPtr+1 and #$0F pha tay lda #A2osX.S.COM sta A2osX.S,y pla asl asl asl asl clc adc #$8F sta DEVSLOTn08F jsr Dev.ParseArgs bcs .9 .8 >PUSHW L.MSG.DETECT.OK >PUSHW L.FD.DEV.NAME >PUSHBI 2 >SYSCALL PrintF >PUSHWI DRV.END >PUSHWI DRV.CS.END-DRV.CS.START >PUSHWI DRV.CS.START >LDYA L.DRV.CS.START >SYSCALL InsDrv bcs .9 >STYA FD.DEV+S.FD.DEV.DRVPTR >PUSHW L.FD.DEV.NAME >LDYA L.FD.DEV >SYSCALL MKDEV .9 rts *-------------------------------------- Dev.ParseArgs >LDYA ARGS >STYA ZPArgPTR lda (ZPArgPTR) bne .1 clc rts .1 stz ZPhParity stz ZPhControl >LDYAI 256 >SYSCALL GetMem bcs .2 >STYA ZPParityPtr stx ZPhParity >LDYAI 256 >SYSCALL GetMem .2 bcs .90 >STYA ZPControlPtr stx ZPhControl >PUSHW ZPArgPtr >PUSHW L.SSCANF.ARGS >PUSHW ZPControlPtr >PUSHW ZPParityPtr >PUSHW L.DCB.STOP >PUSHW L.DCB.DATA >PUSHW L.DCB.BAUD >PUSHBI 10 5 x byte PTRs >SYSCALL sscanf bcs .90 .90 lda ZPhControl beq .91 >SYSCALL FreeMem .91 lda ZPhParity beq .92 >SYSCALL FreeMem .92 lda #E.SYN sec rts *-------------------------------------- CS.END DEVSIG.Offset .HS 05070B0C DEVSIG.Value .HS 38180131 DEVSIG.Length .EQ DEVSIG.Value-DEVSIG.Offset MSG.DETECT .AS "Apple SSC (Super Serial Card,//c Serial Port) Driver" .DO SSCIRQ=1 .AS " (IRQ Enabled)" .FIN .AZ "." MSG.DETECT.OK .AZ "SSC Installed As Device : %s\r\n" MSG.DETECT.KO .AZ "No SSC Found." SSCANF.ARGS .AZ "%u,%d,%d,%s,%s" ARGS .BS 2 *-------------------------------------- FD.DEV .DA #S.FD.T.CDEV .DA #0 HANDLER .DA #0 BUSID .DA #0 DEVID .DA 0 BUSPTR .BS 2 DRVPTR .DA 0 DCBPTR .DA 0 BUFPTR FD.DEV.NAME .AZ "com1" *-------------------------------------- * Driver Code *-------------------------------------- ZPIOCTL .EQ ZPDRV ZPBufPtr .EQ ZPDRV+2 ZPCount .EQ ZPDRV+4 ZPCount2 .EQ ZPDRV+6 *-------------------------------------- DRV.CS.START cld jmp (.1,x) .1 .DA STATUS .DA A2osX.BADCALL .DA A2osX.BADCALL .DA A2osX.BADCALL .DA CONTROL .DA A2osX.BADCALL .DA OPEN .DA CLOSE .DA READ .DA WRITE .DO SSCIRQ=1 .DA IRQ .FIN .DA 0 end or relocation *-------------------------------------- STATUS jsr STATUS.CONTROL.Init ldy #S.IOCTL.STATCODE lda (ZPIOCTL),y beq .1 cmp #S.IOCTL.STATCODE.GETDIB bne STATUS.DCB ldy #S.DIB-1 .HS 2C bit abs .1 ldy #3 .2 lda DIB,y sta (ZPBufPtr),y dey bpl .2 clc rts STATUS.DCB cmp #S.IOCTL.STATCODE.GETDCB bne .3 ldy #S.DCB.COM-1 .2 lda DCB,y sta (ZPBufPtr),y dey bpl .2 clc rts .3 cmp #S.IOCTL.STATCODE.EOF bne STATUS.9 lda DIB+S.DIB.S and #S.DIB.S.OPENED beq OPEN.E .DO SSCIRQ=1 lda INBUF.TAIL eor INBUF.HEAD beq .4 NO DATA? eof = TRUE lda #1 .4 dec clc rts .ELSE .FIN .8 clc rts STATUS.9 lda #MLI.E.BADCTL sec rts *-------------------------------------- CONTROL jsr STATUS.CONTROL.Init ldy #S.IOCTL.CTRLCODE lda (ZPIOCTL),y cmp #S.IOCTL.CTRLCODE.SETDCB bne STATUS.9 ldy #S.DCB.COM-1 .2 lda (ZPBufPtr),y sta DCB,y dey bpl .2 *-------------------------------------- OPEN lda DIB+S.DIB.S bit #S.DIB.S.OPENED beq OPEN.1 OPEN.E lda #MLI.E.OPEN sec rts OPEN.1 php sei ldx DEVSLOTn08F stz SSC.RESET-$8F,x lda #SSC.CTL.CLKINT+SSC.CTL.B9600+SSC.CTL.8D+SSC.CTL.1S+SSC.CMD.NOP sta SSC.CTL-$8F,x .DO SSCIRQ=1 lda #SSC.CMD.TEIRQ+SSC.CMD.TE+SSC.CMD.DTR sta SSC.CMD-$8F,x stz INBUF.HEAD stz INBUF.TAIL stz OUTBUF.HEAD stz OUTBUF.TAIL .ELSE lda #SSC.CMD.RIRQDIS+SSC.CMD.TE+SSC.CMD.DTR sta SSC.CMD-$8F,x .FIN lda SSC.DATA-$8F,x discard any garbage byte lda SSC.STATUS-$8F,x clear any IRQ pending lda #S.DIB.S.OPENED tsb DIB+S.DIB.S plp clc rts *-------------------------------------- CLOSE php sei ldx DEVSLOTn08F stz SSC.RESET-$8F,x lda #S.DIB.S.OPENED trb DIB+S.DIB.S plp clc rts *-------------------------------------- READ php sei jsr READ.WRITE.Init stz ZPCount2 stz ZPCount2+1 .10 inc ZPCount bne .11 inc ZPCount+1 beq .8 .11 .DO SSCIRQ=1 ldy INBUF.TAIL cpy INBUF.HEAD beq .2 lda INBUF,y iny cpy #BUF.SIZE bne .1 ldy #0 .1 sty INBUF.TAIL sta (ZPBufPtr) inc ZPBufPtr bne .12 inc ZPBufPtr+1 .12 inc ZPCount2 bne .10 inc ZPCount2+1 bra .10 .FIN .2 lda SSC.STATUS-$8F,x bit #SSC.STATUS.nDSR true when 0 bne .9 bit #SSC.STATUS.RDRF incoming char? beq .8 lda SSC.DATA-$8F,x sta (ZPBufPtr) inc ZPBufPtr bne .13 inc ZPBufPtr+1 .13 inc ZPCount2 bne .2 inc ZPCount2+1 bra .2 .8 lda ZPCount2 bne .81 ora ZPCount2+1 beq .99 lda ZPCount2 .81 ldy #S.IOCTL.BYTECNT sta (ZPIOCTL),y iny lda ZPCount2+1 sta (ZPIOCTL),y plp clc rts .9 lda #MLI.E.IO .HS 2C BIT ABS .99 lda #E.NODATA plp sec rts *-------------------------------------- WRITE php sei jsr READ.WRITE.Init .2 inc ZPCount bne .3 inc ZPCount+1 beq .8 .3 .DO SSCIRQ=1 lda SSC.STATUS-$8F,x bit #SSC.STATUS.nDSR true when 0 bne .9 lda OUTBUF.HEAD cmp OUTBUF.TAIL Buffer Empty? bne .6 not empty, queue char lda SSC.STATUS-$8F,x and #SSC.STATUS.TDRE Register Empty ? beq .5 not empty, queue char lda (ZPBufPtr) yes, write directly to ACIA inc ZPBufPtr bne .4 inc ZPBufPtr+1 .4 sta SSC.DATA-$8F,x bra .2 .5 lda OUTBUF.HEAD .6 tay inc and #BUF.MASK cmp OUTBUF.TAIL beq .99 Buffer Full!! sta OUTBUF.HEAD lda (ZPBufPtr) inc ZPBufPtr bne .7 inc ZPBufPtr+1 .7 sta OUTBUF,y bra .2 .ELSE .4 lda SSC.STATUS-$8F,x bit #SSC.STATUS.nDSR true when 0 bne .9 bit #SSC.STATUS.TDRE Outgoing char? beq .4 lda (ZPBufPtr) inc ZPBufPtr bne .5 inc ZPBufPtr+1 .5 sta SSC.DATA-$8F,x bra .2 .FIN .8 plp clc rts .9 lda #MLI.E.IO .HS 2C BIT ABS .99 lda #E.NODATA plp sec rts *-------------------------------------- READ.WRITE.Init ldx DEVSLOTn08F STATUS.CONTROL.Init >STYA ZPIOCTL ldy #S.IOCTL.BUFPTR lda (ZPIOCTL),y sta ZPBufPtr iny lda (ZPIOCTL),y sta ZPBufPtr+1 iny #S.IOCTL.BYTECNT lda (ZPIOCTL),y eor #$ff sta ZPCount iny lda (ZPIOCTL),y eor #$ff sta ZPCount+1 rts *-------------------------------------- * IRQ Handler * on exit, CC if handled *-------------------------------------- .DO SSCIRQ=1 IRQ ldx DEVSLOTn08F lda SSC.STATUS-$8F,x * and #SSC.STATUS.IRQ Useless bpl .9 IRQ from this device ? no, exit !!!!Applewin bug #308!!!! bit #SSC.STATUS.RDRF incoming char? beq .2 *------------ IRQ In pha lda INBUF.HEAD tay save actual head for later inc and #BUF.MASK cmp INBUF.TAIL beq .1 buffer full, discard and exit sta INBUF.HEAD lda SSC.DATA-$8F,x read data to clear IRQ sta INBUF,y .1 pla *------------ IRQ Out .2 bit #SSC.STATUS.TDRE beq .8 no transmition possible.... ldy OUTBUF.TAIL something to transmit ? cpy OUTBUF.HEAD beq .8 in that case, HOW TO CLEAR IRQ ???? lda OUTBUF,y sta SSC.DATA-$8F,x write data to clear IRQ tya inc and #BUF.MASK sta OUTBUF.TAIL .8 clc rts .9 sec rts .FIN *-------------------------------------- DRV.CS.END DEVSLOTn08F .BS 1 .DO SSCIRQ=1 INBUF.TAIL .BS 1 INBUF.HEAD .BS 1 OUTBUF.TAIL .BS 1 OUTBUF.HEAD .BS 1 INBUF .BS BUF.SIZE OUTBUF .BS BUF.SIZE .FIN *-------------------------------------- DIB .DO SSCIRQ=1 .DA #S.DIB.S.WRITE+S.DIB.S.READ+S.DIB.S.IRQ .ELSE .DA #S.DIB.S.WRITE+S.DIB.S.READ .FIN .DA #0,#0,#0 >PSTR "Serial Card/Port" .DA #S.DIB.T.CHAR .DA #0 .DA K.VER *-------------------------------------- DCB .DA #S.DCB.T.COM .DA #0 FLAGS .DO SSCIRQ=1 .DA >9600 BAUD (DWORD) .ELSE .DA >115200 .FIN .DA #8 DATA .DA #1 STOP .DA #S.DCB.COM.P.NONE PARITY .DA #S.DCB.COM.C.XONXOFF *-------------------------------------- DRV.END MAN SAVE USR/SRC/DRV/X.SSC.DRV.S LOAD USR/SRC/DRV/SSC.I.DRV.S ASM