PR#3 PREFIX /A2OSX.BUILD NEW INC 1 AUTO 6 .LIST OFF .OP 65C02 .OR $2000 .TF /A2OSX.BUILD/SYS/KM.VSDRIVE *-------------------------------------- .INB /A2OSX.BUILD/INC/MACROS.I .INB /A2OSX.BUILD/INC/IO.I .INB /A2OSX.BUILD/INC/MONITOR.I .INB /A2OSX.BUILD/INC/PRODOS.I .INB /A2OSX.BUILD/INC/MLI.ERR.I .INB /A2OSX.BUILD/INC/COM.6551.I *-------------------------------------- TmpPtr1 .EQ $0 VS.CMD .EQ $C5 "E": Virtual Drive Command Envelope DRV.EntryPoint .EQ $BF41 *-------------------------------------- VSDRIVE.Init >LDAXI VSDRIVE.MSG0 jsr PrintFAX jsr VSDRIVE.Check bcs .90 .1 lda #$C1 Self Modified .2 jsr SSC.Detect bcs .99 stx DRV+2 DRV.Slotn0 sta .1+1 SlotCn and #$0F pha slot n >LDAXI VSDRIVE.SSCOK jsr PrintFAX jsr VSDRIVE.Ping bcs .92 >LDAXI VSDRIVE.SRVOK jsr PrintFAX jsr VSDRIVE.SetSlot bcs .91 pha save slot pha 2 times >LDAXI VSDRIVE.DEVOK jsr PrintFAX jsr VSDRIVE.Install >LDAXI VSDRIVE.OK jsr PrintFAX rts .90 >LDAXI VSDRIVE.DRVKO jsr PrintFAX rts .91 >LDAXI VSDRIVE.NOSLOT jsr PrintFAX rts .92 >LDAXI VSDRIVE.SRVKO jsr PrintFAX inc .1+1 lda .1+1 cmp #$C8 bne .2 Go try next SSC.... .99 >LDAXI VSDRIVE.SSCKO jsr PrintFAX rts *-------------------------------------- VSDRIVE.Check bit RRAMWRAMBNK2 bit RRAMWRAMBNK2 clc lda $D001 eor DRV bne .8 lda $D002 eor DRV+1 bne .8 sec .8 bit RROMBNK1 rts *-------------------------------------- SSC.Detect stz TmpPtr1 sta TmpPtr1+1 .1 ldx #DEVSIG.Value-DEVSIG.Offset-1 .2 ldy DEVSIG.Offset,x lda (TmpPtr1),y cmp DEVSIG.Value,x bne .3 dex bpl .2 lda TmpPtr1+1 A=SlotCN asl asl asl asl tax X=SlotN0 stz SSC.RESET,x pha zzzzzzz... pla lda #SSC.CTL.CLKEXT+SSC.CTL.B115200+SSC.CTL.8D+SSC.CTL.1S+SSC.CMD.NOP sta SSC.CTL,x lda #SSC.CMD.RIRQDIS+SSC.CMD.TE+SSC.CMD.DTR sta SSC.CMD,x lda TmpPtr1+1 clc rts X=SlotN0, A=SlotCN .3 inc TmpPtr1+1 no match, try next slot.... lda TmpPtr1+1 cmp #$C8 bne .1 .9 sec rts *-------------------------------------- VSDRIVE.Ping ldx DRV+2 DRV.Slotn0 stz VSDRIVE.Ping.TO stz VSDRIVE.Ping.TO+1 ldy #10 .1 lda SSC.STATUS,x bit #SSC.STATUS.TDRE Ready for transmit? bne .2 jsr VSDRIVE.IncTimer Wait....... bne .1 dey bne .1 lda #1 .9 sec rts Time Out..... ldy #4 Five bytes to send stz VSDRIVE.Ping.TO stz VSDRIVE.Ping.TO+1 .2 lda VSDRIVE.Ping.CMD,y sta SSC.DATA,x .3 lda SSC.STATUS,x bit #SSC.STATUS.TDRE char transmitted? bne .4 jsr VSDRIVE.IncTimer bne .3 lda #2 bra .9 .4 dey bpl .2 next byte lda #518^$ff sta VSDRIVE.Ping.BC lda /518^$ff sta VSDRIVE.Ping.BC+1 stz VSDRIVE.Ping.TO stz VSDRIVE.Ping.TO+1 ldy #20 .5 lda SSC.STATUS,x and #SSC.STATUS.RDRF incoming char? bne .6 jsr VSDRIVE.IncTimer bne .5 dey bne .5 lda #3 bra .9 .6 lda SSC.DATA,x inc VSDRIVE.Ping.BC 518 bytes to recieve bne .5 inc VSDRIVE.Ping.BC+1 bne .5 clc rts *-------------------------------------- VSDRIVE.IncTimer inc VSDRIVE.Ping.TO bne .8 inc VSDRIVE.Ping.TO+1 .8 rts *-------------------------------------- VSDRIVE.Ping.CMD .HS C4000001C5 C4=C5 eor 01 eor 00 eor 00 VSDRIVE.Ping.TO .BS 2 VSDRIVE.Ping.BC .BS 2 *-------------------------------------- * Find 2 free slots in DEVPTRS (D1 & D2) *-------------------------------------- VSDRIVE.SetSlot ldx #2 Starts at Slot1 .1 lda DEVPTRS,x Drive1 cmp DEVPTRS pointing to S0D1 NODEV ? bne .2 lda DEVPTRS+1,x cmp DEVPTRS+1 bne .2 lda DEVPTRS+16,x Drive2 cmp DEVPTRS bne .2 lda DEVPTRS+17,x cmp DEVPTRS+1 bne .2 lda #DRV.EntryPoint sta DEVPTRS,x sta DEVPTRS+16,x lda /DRV.EntryPoint sta DEVPTRS+1,x sta DEVPTRS+17,x txa asl asl asl ora #$0D ldy DEVCNT iny sta DEVLST,y add Drv1 ora #$80 iny sta DEVLST,y add Drv2 sty DEVCNT txa lsr exit with A=SLOT clc rts .2 inx inx cpx #16 bne .1 rts sec from CPX *-------------------------------------- VSDRIVE.Install ldx #PATCH.SIZE .1 lda PATCH-1,x sta DRV.EntryPoint-1,x dex bne .1 bit RRAMWRAMBNK2 bit RRAMWRAMBNK2 ldx #DRV.SIZE .2 lda DRV-1,x sta $D000,x dex bne .2 bit RROMBNK1 clc rts *-------------------------------------- .INB /A2OSX.SRC/X.PRINTF.S *-------------------------------------- DEVSIG.Offset .HS 05070B0C DEVSIG.Value .HS 38180131 VSDRIVE.MSG0 >CSTR "VSDRIVE (ADTPro Vitual Serial HD) Driver For A2osX\n" VSDRIVE.DRVKO >CSTR "VSDRIVE (Or other custom Driver) Already Installed.\n" VSDRIVE.SSCKO >CSTR "SSC Not Detected.\n" VSDRIVE.SSCOK >CSTR "SSC Found At Slot %d.\nContacting ADTPro Server..." VSDRIVE.SRVKO >CSTR "No Response From ADTPro Server.\n" VSDRIVE.SRVOK >CSTR "ADTPro Server Is Online.\n" VSDRIVE.NOSLOT >CSTR "No ProDOS device slot available.\n" VSDRIVE.DEVOK >CSTR "VSDRIVE Installed 2 devices at S%d,D1 & S%d,D2.\n" VSDRIVE.OK >CSTR "VSDRIVE Driver Successfully Installed.\n" *-------------------------------------- * ProDOS $BE41->$BE4B Patch for switching to BANK2 (10 bytes) *-------------------------------------- PATCH .PH DRV.EntryPoint bit RRAMWRAMBNK2 jsr $D001 bit RRAMWRAMBNK1 rts .EP PATCH.SIZE .EQ *-PATCH *-------------------------------------- * Driver *-------------------------------------- * OP = 2 : Write drv1 * OP = 3 : Read drv1 * OP = 4 : Write drv2 * OP = 5 : Read drv2 * CMD = $C5+OP+BLKLO+BLKHI+CHKSUM * DO NOT trash DRV.COMMAND...DRV.BLKNUM as ProDOS * reuses them after Block operation * A1,A2 are used by Disk II Driver, * so we use it safely as Tmp Ptr *-------------------------------------- DRV.A1L .EQ $3C DRV.A1H .EQ $3D DRV.A2L .EQ $3E DRV.A2H .EQ $3F DRV.COMMAND .EQ $42 DRV.UNITNUM .EQ $43 DRV.BUFF .EQ $44 DRV.BLKNUM .EQ $46 *-------------------------------------- DRV .EQ * .PH $D001 Main LC Bnk 2 $D001->$DFFF cld DRV.Slotn0 ldx #$ff Self Modified lda DRV.COMMAND S=0,R=1,W=2,F=3 bne .1 ldx #$ff return Status ldy #$ff .8 lda #0 clc rts .1 cmp #3 beq .8 Format .... * bcs DRV.DO.CMD.ERR more....IO error ora #2 W=2,R=3 ldy DRV.UNITNUM bpl .2 adc #2 CC from bcs .2 sta DRV.CmdBuf.Cmd store cmd eor #VS.CMD eor DRV.BLKNUM eor DRV.BLKNUM+1 sta DRV.CmdBuf.Sum Compute & store CheckSum lda DRV.BLKNUM sta DRV.CmdBuf.BlkLo lda DRV.BLKNUM+1 sta DRV.CmdBuf.BlkHi * send CMD+CS ldy #4 Send 5 bytes including Sum .3 lda DRV.CmdBuf.Sum,y jsr DRV.SSCSend dey bpl .3 ldy #8 .5 lda DRV.READWRITE,y sta $100,y dey bpl .5 *-------------------------------------- lda DRV.COMMAND dec 1-1=0 if read bne DRV.DO.CMD.W go write *-------------------------------------- * Read block *-------------------------------------- DRV.DO.CMD.R ldy #3 Read Back and check 4 bytes .1 jsr DRV.SSCGet eor DRV.CmdBuf.BlkHi,y bne DRV.DO.CMD.ERR dey bpl .1 ldy #4 Read 4 bytes DATE/TIME + 1 Byte Checksum .2 jsr DRV.SSCGet eor DRV.CmdBuf.Sum sta DRV.CmdBuf.Sum dey bpl .2 tay Last EOR was with Checksum, must be 0 bne DRV.DO.CMD.ERR * Y=0 from TAY stz DRV.CmdBuf.Sum sec .3 jsr DRV.SSCGet jsr $100 eor DRV.CmdBuf.Sum sta DRV.CmdBuf.Sum iny bne .3 bcc .4 inc DRV.BUFF+1 clc bcc .3 .4 dec DRV.BUFF+1 jsr DRV.SSCGet eor DRV.CmdBuf.Sum bne DRV.DO.CMD.ERR rts A=0,CC from bcc .4 *-------------------------------------- DRV.DO.CMD.ERR1 pla pla DRV.DO.CMD.ERR lda #MLI.E.IO sec rts *-------------------------------------- * Write Block *-------------------------------------- DRV.DO.CMD.W lda #$B1 lda (),y sta $103 ldy #0 stz DRV.CmdBuf.Sum sec .1 jsr $100 jsr DRV.SSCSend eor DRV.CmdBuf.Sum sta DRV.CmdBuf.Sum iny bne .1 bcc .2 inc DRV.BUFF+1 clc bcc .1 .2 dec DRV.BUFF+1 * A = DRV.CmdBuf.Sum jsr DRV.SSCSend * read back CMD ldy #4 Read 5 bytes (echo from server) .3 jsr DRV.SSCGet eor DRV.CmdBuf.Sum,y Check 5 bytes (including block Sum) bne DRV.DO.CMD.ERR dey bpl .3 rts *-------------------------------------- DRV.SSCSend sta .2+1 .1 lda SSC.STATUS,x * bit #SSC.STATUS.DCD+SSC.STATUS.DSR * beq DRV.DO.CMD.ERR1 and #SSC.STATUS.TDRE Outgoing char? beq .1 .2 lda #$ff sta SSC.DATA,x rts *-------------------------------------- DRV.SSCGet lda SSC.STATUS,x * bit #SSC.STATUS.DCD+SSC.STATUS.DSR * beq DRV.DO.CMD.ERR1 and #SSC.STATUS.RDRF incoming char? beq DRV.SSCGet lda SSC.DATA,x rts *-------------------------------------- DRV.READWRITE bit RRAMWRAMBNK1 sta (DRV.BUFF),y bit RRAMWRAMBNK2 rts *-------------------------------------- DRV.CmdBuf.Sum .BS 1 Reverse order for dey DRV.CmdBuf.BlkHi .BS 1 DRV.CmdBuf.BlkLo .BS 1 DRV.CmdBuf.Cmd .BS 1 DRV.CmdBuf.Env .DA #VS.CMD *-------------------------------------- .EP *-------------------------------------- .LIST ON DRV.SIZE .EQ *-DRV .LIST OFF *-------------------------------------- * CONTROL SECTION : *-------------------------------------- .DO DRV.SIZE>255 * ERROR:DRV.SIZE too big .FIN *-------------------------------------- MAN SAVE /A2OSX.SRC/SYS/KM.VSDRIVE.S ASM