A2osX/SCMASM.30/SCMASM.S.EDIT..txt

510 lines
14 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
*--------------------------------------
* SOFT INITIALIZATION
*--------------------------------
SOFT LDA /$1000 START SYMBOL TABLE AT $1000
SYMBOL.BASE .EQ *-1
STA LO.MEM+1
LDA #0
STA LO.MEM
STA AUTOLN.FLAG TURN OFF AUTOMATIC LINE NUMBERS
JSR IO.WARM INIT SCREEN, CONNECT DOS
JSR CLOSE.FILES
*--------------------------------
FAST CLC SET TO FAST LISTING SPEED
.HS 24 (SKIP OVER SEC)
SLOW SEC SET TO SLOW LISTING SPEED
ROR FLAG.SPEED SET/CLEAR SIGN BIT
*--------------------------------
* GET NEXT LINE
*--------------------------------
GNL
LDX #$FF INIT STACK
TXS
STX PASS PASS=-1 IF NOT ASSEMBLING
INX MAKE X=0
STX SCI.STATE GET INTO "IMMEDIATE" STATE
STX RPTCNT CLEAR REPEAT COUNT
STX MACRO.LEVEL
STX PARAM.PNTR
STX CHAR.PNTR
STX PAGE.LENGTH TURN OFF TITLING
JSR READ.LINE
JSR GNC.UC.START GET FIRST CHAR OF LINE
BEQ GNL EMPTY LINE OR 1ST CHAR IS BLANK
JSR CHECK.LETTER
BCC .1 NOT A LETTER
JSR SEARCH.COMMAND.TABLE
JMP GNL
*---Test for single char cmds----
.1 LDY #CHARS.FOR.COMMANDS
JSR SEARCH.CHAR.TABLES
JMP GNL
*---" LINE, ECHO ALL CHARS-------
ECHO1 JSR CHO SEND CHARACTER
ECHO.LINE
JSR GNC GET NEXT CHAR
BCC ECHO1 NOT END YET
RTS
*--------------------------------
* SYNTAX ERROR
*--------------------------------
SYNX LDY #QSYNX
JMP HARD.ERROR
*--------------------------------
* NUMBERED LINE
*--------------------------------
NML JSR GNC.START GET FIRST CHAR
JSR DECN CONVERT LINE NUMBER
LDA DGTCNT MUST BE 1 TO 5 DIGITS
BEQ SYNX
LDA SYM.VALUE+2
ORA SYM.VALUE+3
BNE SYNX > 65535
*---Compact the numbered line----
DEY Backup to previous character
JSR COMPACT.LINE
*--------------------------------
LDX #1 COPY IN BINARY LINE #
.51 LDA SYM.VALUE,X
STA CURLNO,X SAVE HERE TOO, FOR AUTO-NUMBER
STA WBUF+1,X
DEX
BPL .51
*--------------------------------
* FIND LINE, OR PLACE WHERE IT SHOULD GO
* LINE.START --> BEGINNING OF THIS LINE
* LINE.END --> BEGINNING OF NEXT LINE
*--------------------------------
LDX #SYM.VALUE POINT AT LINE NUMBER
JSR SERTXT FIND IT IF THERE
SEC GET LENGTH OF HOLE
LDA LINE.END WILL ALWAYS BE LESS THAN 256
SBC LINE.START
SEC SUBTRACT LENGTH OF NEW LINE
SBC WBUF LINE SIZE
BEQ .11 SAME SIZE EXACTLY
STA MOVE.DISTANCE
LDA #0
SBC #0
STA MOVE.DISTANCE+1
BCC .6 NEW LINE LONGER THAN HOLE
*--------------------------------
* NEW LINE SHORTER THAN HOLE
*--------------------------------
CLC COMPUTE TARGET TO MOVE UP TO
LDA LINE.START
ADC MOVE.DISTANCE
STA A4L
LDA LINE.START+1
ADC MOVE.DISTANCE+1
STA A4H
JSR MOVE.TEXT.UP
JMP .10 NOW HOLE IS RIGHT SIZE
*--------------------------------
* ENLARGE HOLE TO MAKE ROOM
*--------------------------------
.6 CLC (MOVE.DISTANCE) = -<#BYTES TO EXPAND>
LDA PP COMPUTE TARGET ADDRESS
ADC MOVE.DISTANCE
STA A4L
LDA PP+1
ADC MOVE.DISTANCE+1
STA A4H
LDA A4L BE SURE THERE IS ROOM
CMP LO.MEM
LDA A4H
SBC LO.MEM+1
BCC MFER NO ROOM!
JSR MOVE.TEXT.DOWN
*---Adjust SRCP if needed--------
.10 LDA SRCP If hole is above (SRCP),
CMP LINE.END then need to add MOVE.DISTANCE
LDA SRCP+1
SBC LINE.END+1
BCS .11
LDA SRCP
ADC MOVE.DISTANCE
STA SRCP
LDA SRCP+1
ADC MOVE.DISTANCE+1
STA SRCP+1
*--------------------------------
* COPY NEW LINE INTO THE HOLE
*--------------------------------
.11 LDX WBUF LINE SIZE
BEQ .14 NO NEW LINE TO COPY
LDY #0
.12 LDA LINE.END BACK UP POINTER TO END OF HOLE
BNE .13
DEC LINE.END+1
.13 DEC LINE.END
DEX
LDA WBUF,X
STA (LINE.END),Y
TXA
BNE .12
.14 RTS
*--------------------------------
MFER LDY #QMEMFL MEM FULL ERROR
JMP HARD.ERROR
*--------------------------------
COMPACT.LINE
LDX #4 Start storing at WBUF+3
LDA #-1 Prime RPT pump
STA RPTCNT
.1 STA RPTCHR
.2 INY advance input pointer
INC RPTCNT (first time makes it = 0)
LDA WBUF,Y get next char
AND #$7F be sure its low ascii
CMP RPTCHR save as previous char?
BEQ .2 ...yes, just count it
PHA save new character
*--------------------------------
LDA RPTCNT
BEQ .3
JSR PROCESS.REPEAT.COUNT
*--------------------------------
.3 PLA get new character
BNE .1 ...not 00 terminator
STA WBUF-1,X store terminator
CPX #5 If only line number, make length 00
BCS .4
LDX #0
.4 STX WBUF
RTS
*--------------------------------
PROCESS.REPEAT.COUNT
LDA RPTCHR
CMP #' '
BEQ .5 ...compress blanks in special way
LDA RPTCNT
CMP COMPRESSION.LIMIT
BCS .2 ...enough to compress to 3 bytes
.1 LDA RPTCHR spit out uncompressed chars
STA WBUF-1,X
INX
DEC RPTCNT
BNE .1
RTS
*---Compress $C0 cnt char--------
.2 STA WBUF,X store count
LDA #$C0 Compression token
STA WBUF-1,X
INX
INX
LDA RPTCHR repeated char
.3 STA WBUF-1,X
INX
LDA #0
STA RPTCNT
RTS
*---Compress blanks--------------
.4 SBC #$3F Maximum blanks in one token
STA RPTCNT
LDA #$BF $3F blanks
STA WBUF-1,X
INX
.5 LDA RPTCNT Number of blanks left
CMP #$40
BCS .4 ...too many for one token
ORA #$80 make into blank token + count
BNE .3 ...always
*--------------------------------
SCAN.3.DECIMAL.NUMBERS
LDX #6 FIRST CLEAR TO ZERO
LDA #0
.1 STA A0L-1,X
DEX
BNE .1
JSR SCAN.1.DECIMAL.NUMBER
JSR SCAN.1.DECIMAL.NUMBER
*** JMP SCAN.1.DECIMAL.NUMBER
*--------------------------------
SCAN.1.DECIMAL.NUMBER
.1 JSR GNC
BCS .2 END OF LINE
EOR #$30 IS THIS A DIGIT?
CMP #10
BCS .1 NO
TXA SAVE X-REG
PHA
JSR DECN CONVERT NUMBER
PLA RESTORE X-REG
TAX
LDA SYM.VALUE STACK NUMBER
STA A0L,X
INX
LDA SYM.VALUE+1
STA A0L,X
INX
.2 RTS
*--------------------------------
* DECIMAL NUMBER INPUT
*--------------------------------
DECN JSR BACKUP.CHAR.PNTR
JSR ZERO.SYM.VALUE CLEAR ACCUMULATOR
STA DGTCNT
.1 JSR GNC GET NEXT CHAR
EOR #$30 CHECK IF DIGIT
CMP #10
BCS .5 NOT A DIGIT
PHA SAVE THE DIGIT
*---ACCUMULATOR * TEN------------
JSR ASL.SYM.VALUE
BCS .6 OVERFLOW ERROR
LDX #3
.2 LDA SYM.VALUE,X HI- TO LO-
PHA
DEX
BPL .2
.3 JSR ASL.SYM.VALUE
BCS .6 OVERFLOW ERROR
INX
BEQ .3 DO IT TWICE
PLA
ADC SYM.VALUE
STA SYM.VALUE
PLA
ADC SYM.VALUE+1
STA SYM.VALUE+1
PLA
ADC SYM.VALUE+2
STA SYM.VALUE+2
PLA
ADC SYM.VALUE+3
STA SYM.VALUE+3
BCS .6 OVERFLOW ERROR
*---ADD CURRENT DIGIT------------
PLA
ADC SYM.VALUE
STA SYM.VALUE
BCC .4
INC SYM.VALUE+1
BNE .4
INC SYM.VALUE+2
BNE .4
INC SYM.VALUE+3
BEQ .6 OVERFLOW ERROR
.4 INC DGTCNT COUNT THE DIGIT
BNE .1 ...ALWAYS
.5 RTS
.6 LDY #QER3 RANGE ERROR
JMP SOFT.ERROR
*--------------------------------
* GET NEXT NON-BLANK CHAR
*--------------------------------
GNNB JSR GNC.UC GET NEXT CHAR IN UPPER CASE
BCS .1 END OF LINE
BEQ GNNB BLANK
.1 RTS RETURN
*--------------------------------
* GET NEXT CHAR IN UPPER CASE
*--------------------------------
GNC.UC.START
LDY #0
STY CHAR.PNTR
GNC.UC JSR GNC GET NEXT CHAR ANY CASE
BEQ .1 SPACE OR <EOL>
JSR ELIMINATE.CASE MAP LOWER CASE TO UPPER CASE
STA CURRENT.CHAR
CMP #$FF CLEAR CARRY, SET .NE.
.1 RTS
*--------------------------------
* GET NEXT CHAR
*--------------------------------
GNC.START
LDY #0 BEGINNING OF LINE
.HS 2C SKIP NEXT TWO BYTES
GNC LDY CHAR.PNTR
GNC2 LDA WBUF,Y GET CHAR
AND #$7F
STA CURRENT.CHAR
BEQ .1 END OF LINE
INY BUMP POINTER
STY CHAR.PNTR
CMP #$20 SEE IF BLANK
CLC CARRY CLEAR SINCE NOT AT END
RTS
.1 LDA #$20 RETURN BLANK
CMP #$20 SET CARRY AND EQUAL STATUS
RTS
*--------------------------------
* BACK UP CHARACTER POINTER
*--------------------------------
BACKUP.CHAR.PNTR
PHA SAVE A-REG
LDA CURRENT.CHAR
BEQ .1 DO NOT BACK OFF THE END
LDA CHAR.PNTR
BEQ .1 DO NOT BACK BEYOND THE BEGINNING
DEC CHAR.PNTR
.1 PLA
RTS
*--------------------------------
* GET NEXT TOKEN FROM SOURCE LINE
*--------------------------------
NTKN
LDA RPTCNT
BNE .3 IN A REPEATED CHAR LOOP
JSR GNB GET NEXT CHAR FROM SOURCE
ASL ...WEIRD WAY TO TEST SIGN BIT
ROR ...AND AS WELL AS 00
BPL .4 ...NORMAL CHARACTER
CMP #$C0 SEE IF BLANKS
BCC .1 ...YES
JSR GNBI REPEAT TOKEN $C0 XX YY, GET XX
STA RPTCNT
JSR GNBI GET YY (CHAR TO BE REPEATED)
JMP .2 ...ALWAYS
.1 AND #$3F BLANK COUNT
STA RPTCNT
LDA #$20 BLANK
.2 STA RPTCHR
.3 DEC RPTCNT
LDA RPTCHR
.4 RTS
*--------------------------------
* GET NEXT BYTE FROM SOURCE
*--------------------------------
GNB LDY #0
GNBI
.DO AUXMEM
LDA MACRO.LEVEL
BEQ .0 ...NOT IN A SKELETON
>SYM LDA,SRCP
.HS 2C SKIP OVER LDA (SRCP),Y
.FIN
.0 LDA (SRCP),Y
>INCD SRCP
BIT INFLAG INSIDE BLOCKED .IN?
BVC .3 ...NO
PHA
LDA MACRO.LEVEL
BNE .25 INSIDE A SKELETON
LDA INSAVE+4 REMAINING BYTES IN THIS BLOCK
BNE .2 ...THERE ARE MORE
ORA INSAVE+5
BEQ .4 ...NO MORE IN THIS BLOCK
DEC INSAVE+5
.2 DEC INSAVE+4
.25 PLA
.3 RTS
*---TRY TO READ ANOTHER BLOCK----
.4 PLA
LDA INSAVE+6 REFNUM OF INB FILE
STA SCI.IOB.RW+1
LDA PP STARTING ADDRESS
STA SRCP
STA SCI.IOB.RW+2
LDA PP+1
STA SRCP+1
STA SCI.IOB.RW+3
SEC
LDA HI.MEM+1 NUMBER OF PAGES
SBC PP+1
STA SCI.IOB.RW+5
LDA #0
STA SCI.IOB.RW+4
LDA #$CA READ
JSR SCI.MLI
BCC .5 ...NO ERRORS
CMP #5 END OF DATA?
BNE PRODOS.ERROR ...ERROR
.5 LDA SCI.IOB.RW+6
STA INSAVE+4 # BYTES ACTUALLY READ
LDA SCI.IOB.RW+7
STA INSAVE+5
BCC GNB ...NOT END OF DATA
LDA INSAVE+6 REFNUM
STA SCI.IOB.CLOSE+1 FOR CLOSE CALL
LDA #$CC
JSR SCI.MLI
BCS PRODOS.ERROR
JSR RESTORE END OF THE INBx FILE
JMP ASM2
*--------------------------------
PRODOS.ERROR
PHA
JSR RESTORE.IF.IN.INBX
PLA
JMP SCI.ERROR
*--------------------------------
* RETURN .CS. IF VALID CHAR
* .CC. IF INVALID CHAR
*--------------------------------
CHECK.DOT.DIGIT.OR.LETTER
CMP #'.
BEQ CHECKS.OK
CMP #'_' allow underline in symbols too
BEQ CHECKS.OK
CHECK.DIGIT.OR.LETTER
JSR CHECK.DIGIT
BCS CHECKS.OK
CHECK.LETTER
CMP #'A
BCC CHECKS.NOT.OK
CMP #'Z+1
BCC CHECKS.OK
CHECKS.NOT.OK
CLC
RTS
CHECK.DIGIT
CMP #'0
BCC CHECKS.NOT.OK
CMP #'9+1
BCS CHECKS.NOT.OK
CHECKS.OK
SEC
RTS
*--------------------------------
CHECK.COMMENT.CHAR
CMP #'* STAR?
BEQ .1 YES
CMP #'; SEMI-COLON?
.1 RTS
*--------------------------------
* INITIALIZE FOR HARD ENTRY
*--------------------------------
HARD.INIT
CLD
*---Establish LO.MEM & HI.MEM------
LDA SYMBOL.BASE SET UP LO.MEM
STA LO.MEM+1
LDA SCI.HIMEM.PAGE
STA HI.MEM+1
LDA #0
STA LO.MEM
STA HI.MEM
*---Init other parameters--------
STA INCREMENT.VALUE+1
STA PROMPT.FLAG
STA INFLAG
JSR STINIT INITIALIZE SYMBOL TABLE
LDA #10 SET AUTO-LINE-NUMBERING INCREMENT
STA INCREMENT.VALUE
LDA #990 SET AUTO-LINE-NUMBERING
STA CURLNO INITIAL VALUE
LDA /990
STA CURLNO+1
*---Print Heading----------------
JSR IO.INIT INIT TEXT, FULL WINDOW, ETC.
JSR VERSION Print Version Number
*--------------------------------
EMPTY.SOURCE.AREA
LDA HI.MEM
STA PP EMPTY SOURCE AREA
LDA HI.MEM+1
STA PP+1
RTS
*--------------------------------
Q.VERSION
.DA #VERSION.LO+"0",#".",#VERSION.HI+"0"
*--------------------------------------
MAN
SAVE usr/src/scmasm.30/scmasm.s.edit
LOAD usr/src/scmasm.30/scmasm.s
ASM