A2osX/DRV/X.SSC.DRV.S.txt
2019-05-16 17:51:19 +02:00

639 lines
11 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
.OP 65C02
.OR $2000
*--------------------------------------
.DO SSCIRQ=1
.TF DRV/SSC.I.DRV
.ELSE
.TF DRV/SSC.DRV
.FIN
*--------------------------------------
.DO SSCIRQ=1
BUF.SIZE .EQ $40
BUF.MASK .EQ $3F
.FIN
*--------------------------------------
ZPArgPtr .EQ ZPBIN
ZPParityPtr .EQ ZPBIN+2
ZPControlPtr .EQ ZPBIN+4
ZPhParity .EQ ZPBIN+6
ZPhControl .EQ ZPBIN+7
*--------------------------------------
* File Header (16 Bytes)
*--------------------------------------
CS.START cld
jmp Dev.Detect cld,jmp abs=DRV
.DA #$61 6502,Level 1 (65c02)
.DA #1 DRV Layout Version 1
.DA 0
.DA CS.END-CS.START Code Length
.DA 0
.DA #32 SS
.DA #8 ZP
.DA 0
*--------------------------------------
* Relocation Table
*--------------------------------------
L.MSG.DETECT .DA MSG.DETECT
L.MSG.DETECT.OK .DA MSG.DETECT.OK
L.MSG.DETECT.KO .DA MSG.DETECT.KO
L.DRV.CS.START .DA DRV.CS.START
L.FD.DEV .DA FD.DEV
L.FD.DEV.NAME .DA FD.DEV.NAME
L.SSCANF.ARGS .DA SSCANF.ARGS
L.DCB.BAUD .DA DCB+S.DCB.COM.BAUD
L.DCB.DATA .DA DCB+S.DCB.COM.DATA
L.DCB.STOP .DA DCB+S.DCB.COM.STOP
.DA 0 End Of Reloc Table
*--------------------------------------
Dev.Detect >STYA ARGS
>LDYA L.MSG.DETECT
>SYSCALL puts
stz ZPArgPtr
lda #$C1
sta ZPArgPtr+1
.1 and #$0f
tay
lda A2osX.S,y
bne .3
ldx #DEVSIG.Length-1
.2 ldy DEVSIG.Offset,x
lda (ZPArgPtr),y
cmp DEVSIG.Value,x
bne .3
dex
bpl .2
bra .4
.3 inc FD.DEV.NAME+3
inc ZPArgPtr+1 no match, try next slot....
lda ZPArgPtr+1
cmp #$C8
bne .1
>LDYA L.MSG.DETECT.KO
>SYSCALL puts
lda #MLI.E.NODEV Not Found in any slot, exiting
sec
rts
.4 lda ZPArgPtr+1
and #$0F
pha
tay
lda #A2osX.S.COM
sta A2osX.S,y
pla
asl
asl
asl
asl
clc
adc #$8F
sta DEVSLOTn08F
jsr Dev.ParseArgs
bcs .9
.8 >PUSHW L.FD.DEV.NAME
>PUSHBI 2
>LDYA L.MSG.DETECT.OK
>SYSCALL printf
>PUSHWI DRV.END
>PUSHWI DRV.CS.END
>PUSHWI DRV.CS.START
>LDYA L.DRV.CS.START
>SYSCALL InsDrv
bcs .9
>STYA FD.DEV+S.FD.DEV.DRVPTR
>PUSHW L.FD.DEV.NAME
>LDYA L.FD.DEV
>SYSCALL MKDEV
.9 rts
*--------------------------------------
Dev.ParseArgs >LDYA ARGS
>STYA ZPArgPTR
lda (ZPArgPTR)
bne .1
clc
rts
.1 stz ZPhParity
stz ZPhControl
>LDYAI 256
>SYSCALL getmem
bcs .2
>STYA ZPParityPtr
stx ZPhParity
>LDYAI 256
>SYSCALL getmem
.2 bcs .90
>STYA ZPControlPtr
stx ZPhControl
>PUSHW ZPControlPtr
>PUSHW ZPParityPtr
>PUSHW L.DCB.STOP
>PUSHW L.DCB.DATA
>PUSHW L.DCB.BAUD
>PUSHBI 10 5 x byte PTRs
>PUSHW L.SSCANF.ARGS
>LDYA ZPArgPtr
>SYSCALL sscanf
bcs .90
.90 lda ZPhControl
beq .91
>SYSCALL freemem
.91 lda ZPhParity
beq .92
>SYSCALL freemem
.92 lda #E.SYN
sec
rts
*--------------------------------------
CS.END
DEVSIG.Offset .HS 05070B0C
DEVSIG.Value .HS 38180131
DEVSIG.Length .EQ DEVSIG.Value-DEVSIG.Offset
MSG.DETECT .AS "Apple SSC (Super Serial Card,//c Serial Port) Driver"
.DO SSCIRQ=1
.AS " (IRQ Enabled)"
.FIN
.AZ "."
MSG.DETECT.OK .AZ "SSC Installed As Device : %s\r\n"
MSG.DETECT.KO .AZ "No SSC Found."
SSCANF.ARGS .AZ "%u,%d,%d,%s,%s"
ARGS .BS 2
*--------------------------------------
FD.DEV .DA #S.FD.T.CDEV
.DA #0 HANDLER
.DA #0 BUSID
.DA #0 DEVID
.DA 0 BUSPTR
.BS 2 DRVPTR
.DA 0 DCBPTR
.DA 0 BUFPTR
FD.DEV.NAME .AZ "COM1"
*--------------------------------------
* Driver Code
*--------------------------------------
ZPIOCTL .EQ ZPDRV
ZPBufPtr .EQ ZPDRV+2
ZPCount .EQ ZPDRV+4
ZPCount2 .EQ ZPDRV+6
*--------------------------------------
DRV.CS.START cld
jmp (.1,x)
.1 .DA STATUS
.DA A2osX.BADCALL
.DA A2osX.BADCALL
.DA A2osX.BADCALL
.DA CONTROL
.DA A2osX.BADCALL
.DA OPEN
.DA CLOSE
.DA READ
.DA WRITE
.DO SSCIRQ=1
.DA IRQ
.FIN
.DA 0 end or relocation
*--------------------------------------
STATUS jsr STATUS.CONTROL.Init
ldy #S.IOCTL.STATCODE
lda (ZPIOCTL),y
beq .1
cmp #S.IOCTL.STATCODE.GETDIB
bne STATUS.DCB
ldy #S.DIB-1
.HS 2C bit abs
.1 ldy #3
.2 lda DIB,y
sta (ZPBufPtr),y
dey
bpl .2
clc
rts
STATUS.DCB cmp #S.IOCTL.STATCODE.GETDCB
bne .3
ldy #S.DCB.COM-1
.2 lda DCB,y
sta (ZPBufPtr),y
dey
bpl .2
clc
rts
.3 cmp #S.IOCTL.STATCODE.EOF
bne STATUS.9
lda DIB+S.DIB.S
and #S.DIB.S.OPENED
beq OPEN.E
.DO SSCIRQ=1
lda INBUF.TAIL
eor INBUF.HEAD
beq .4 NO DATA? eof = TRUE
lda #1
.4 dec
clc
rts
.ELSE
.FIN
.8 clc
rts
STATUS.9 lda #MLI.E.BADCTL
sec
rts
*--------------------------------------
CONTROL jsr STATUS.CONTROL.Init
ldy #S.IOCTL.CTRLCODE
lda (ZPIOCTL),y
cmp #S.IOCTL.CTRLCODE.SETDCB
bne STATUS.9
ldy #S.DCB.COM-1
.2 lda (ZPBufPtr),y
sta DCB,y
dey
bpl .2
*--------------------------------------
OPEN lda DIB+S.DIB.S
bit #S.DIB.S.OPENED
beq OPEN.1
OPEN.E lda #MLI.E.OPEN
sec
rts
OPEN.1 php
sei
ldx DEVSLOTn08F
stz SSC.RESET-$8F,x
lda #SSC.CTL.CLKINT+SSC.CTL.B9600+SSC.CTL.8D+SSC.CTL.1S+SSC.CMD.NOP
sta SSC.CTL-$8F,x
.DO SSCIRQ=1
lda #SSC.CMD.TEIRQ+SSC.CMD.TE+SSC.CMD.DTR
sta SSC.CMD-$8F,x
stz INBUF.HEAD
stz INBUF.TAIL
stz OUTBUF.HEAD
stz OUTBUF.TAIL
.ELSE
lda #SSC.CMD.RIRQDIS+SSC.CMD.TE+SSC.CMD.DTR
sta SSC.CMD-$8F,x
.FIN
lda SSC.DATA-$8F,x discard any garbage byte
lda SSC.STATUS-$8F,x clear any IRQ pending
lda #S.DIB.S.OPENED
tsb DIB+S.DIB.S
plp
clc
rts
*--------------------------------------
CLOSE php
sei
ldx DEVSLOTn08F
stz SSC.RESET-$8F,x
lda #S.DIB.S.OPENED
trb DIB+S.DIB.S
plp
clc
rts
*--------------------------------------
READ php
sei
jsr READ.WRITE.Init
stz ZPCount2
stz ZPCount2+1
.10 inc ZPCount
bne .11
inc ZPCount+1
beq .8
.11 .DO SSCIRQ=1
ldy INBUF.TAIL
cpy INBUF.HEAD
beq .2
lda INBUF,y
iny
cpy #BUF.SIZE
bne .1
ldy #0
.1 sty INBUF.TAIL
sta (ZPBufPtr)
inc ZPBufPtr
bne .12
inc ZPBufPtr+1
.12 inc ZPCount2
bne .10
inc ZPCount2+1
bra .10
.FIN
.2 lda SSC.STATUS-$8F,x
bit #SSC.STATUS.nDSR true when 0
bne .9
bit #SSC.STATUS.RDRF incoming char?
beq .8
lda SSC.DATA-$8F,x
sta (ZPBufPtr)
inc ZPBufPtr
bne .13
inc ZPBufPtr+1
.13 inc ZPCount2
bne .2
inc ZPCount2+1
bra .2
.8 lda ZPCount2
bne .81
ora ZPCount2+1
beq .99
lda ZPCount2
.81 ldy #S.IOCTL.BYTECNT
sta (ZPIOCTL),y
iny
lda ZPCount2+1
sta (ZPIOCTL),y
plp
clc
rts
.9 lda #MLI.E.IO
.HS 2C BIT ABS
.99 lda #E.NODATA
plp
sec
rts
*--------------------------------------
WRITE php
sei
jsr READ.WRITE.Init
.2 inc ZPCount
bne .3
inc ZPCount+1
beq .8
.3 .DO SSCIRQ=1
lda SSC.STATUS-$8F,x
bit #SSC.STATUS.nDSR true when 0
bne .9
lda OUTBUF.HEAD
cmp OUTBUF.TAIL Buffer Empty?
bne .6 not empty, queue char
lda SSC.STATUS-$8F,x
and #SSC.STATUS.TDRE Register Empty ?
beq .5 not empty, queue char
lda (ZPBufPtr) yes, write directly to ACIA
inc ZPBufPtr
bne .4
inc ZPBufPtr+1
.4 sta SSC.DATA-$8F,x
bra .2
.5 lda OUTBUF.HEAD
.6 tay
inc
and #BUF.MASK
cmp OUTBUF.TAIL
beq .99 Buffer Full!!
sta OUTBUF.HEAD
lda (ZPBufPtr)
inc ZPBufPtr
bne .7
inc ZPBufPtr+1
.7 sta OUTBUF,y
bra .2
.ELSE
.4 lda SSC.STATUS-$8F,x
bit #SSC.STATUS.nDSR true when 0
bne .9
bit #SSC.STATUS.TDRE Outgoing char?
beq .4
lda (ZPBufPtr)
inc ZPBufPtr
bne .5
inc ZPBufPtr+1
.5 sta SSC.DATA-$8F,x
bra .2
.FIN
.8 plp
clc
rts
.9 lda #MLI.E.IO
.HS 2C BIT ABS
.99 lda #E.NODATA
plp
sec
rts
*--------------------------------------
READ.WRITE.Init ldx DEVSLOTn08F
STATUS.CONTROL.Init
>STYA ZPIOCTL
ldy #S.IOCTL.BUFPTR
lda (ZPIOCTL),y
sta ZPBufPtr
iny
lda (ZPIOCTL),y
sta ZPBufPtr+1
iny #S.IOCTL.BYTECNT
lda (ZPIOCTL),y
eor #$ff
sta ZPCount
iny
lda (ZPIOCTL),y
eor #$ff
sta ZPCount+1
rts
*--------------------------------------
* IRQ Handler
* on exit, CC if handled
*--------------------------------------
.DO SSCIRQ=1
IRQ ldx DEVSLOTn08F
lda SSC.STATUS-$8F,x
* and #SSC.STATUS.IRQ Useless
bpl .9 IRQ from this device ? no, exit !!!!Applewin bug #308!!!!
bit #SSC.STATUS.RDRF incoming char?
beq .2
*------------ IRQ In
pha
lda INBUF.HEAD
tay save actual head for later
inc
and #BUF.MASK
cmp INBUF.TAIL
beq .1 buffer full, discard and exit
sta INBUF.HEAD
lda SSC.DATA-$8F,x read data to clear IRQ
sta INBUF,y
.1 pla
*------------ IRQ Out
.2 bit #SSC.STATUS.TDRE
beq .8 no transmition possible....
ldy OUTBUF.TAIL something to transmit ?
cpy OUTBUF.HEAD
beq .8 in that case, HOW TO CLEAR IRQ ????
lda OUTBUF,y
sta SSC.DATA-$8F,x write data to clear IRQ
tya
inc
and #BUF.MASK
sta OUTBUF.TAIL
.8 clc
rts
.9 sec
rts
.FIN
*--------------------------------------
DRV.CS.END
DEVSLOTn08F .BS 1
.DO SSCIRQ=1
INBUF.TAIL .BS 1
INBUF.HEAD .BS 1
OUTBUF.TAIL .BS 1
OUTBUF.HEAD .BS 1
INBUF .BS BUF.SIZE
OUTBUF .BS BUF.SIZE
.FIN
*--------------------------------------
DIB .DO SSCIRQ=1
.DA #S.DIB.S.WRITE+S.DIB.S.READ+S.DIB.S.IRQ
.ELSE
.DA #S.DIB.S.WRITE+S.DIB.S.READ
.FIN
.DA #0,#0,#0
>PSTR "Serial Card/Port"
.DA #S.DIB.T.CHAR
.DA #0
.DA K.VER
*--------------------------------------
DCB .DA #S.DCB.T.COM
.DA #0 FLAGS
.DO SSCIRQ=1
.DA >9600 BAUD (DWORD)
.ELSE
.DA >115200
.FIN
.DA #8 DATA
.DA #1 STOP
.DA #S.DCB.COM.P.NONE PARITY
.DA #S.DCB.COM.C.XONXOFF
*--------------------------------------
DRV.END
MAN
SAVE USR/SRC/DRV/X.SSC.DRV.S
LOAD USR/SRC/DRV/SSC.I.DRV.S
ASM