A2osX/SYS/KERNEL.S.BIN.txt

433 lines
9.9 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PR#3
PREFIX /A2OSX.SRC
NEW
INC 1
AUTO 6
.LIST OFF
*--------------------------------------
* BIN.LoadExeYA
* in :
* A = hMem of FilePath (PSTRING)
* out :
* Y,A = MEMPTR
* X = hMem of Code Segment
*--------------------------------------
K.LoadEXEYA >STYA K.LoadEXEYA.Filename
>SYSCALL SYS.PStrUprYA Y,A unmodified
jsr K.GetMemByNameYA
bcs K.LoadEXEYA.1 not already loaded
>STYA ZPQuickPtr1 Save base address
ldy #S.MEM.REFCNT
lda (ZPQuickPtr1),y
inc
sta (ZPQuickPtr1),y
txa
jmp K.GetMemPtrA X=hMem from K.GetMemByNameA
*--------------------------------------
K.LoadEXEYA.1 >PUSHWI KrnBuf256
>PUSHW K.LoadEXEYA.Filename
jsr K.STAT Look for AUXTYPE
bcs .9
>LDYA KrnBuf256+S.STAT.PRODOS.AUXTYPE
>STYA BIN.Relocate.Start
>PUSHYA Push AUXTYPE
>PUSHBI 6 S.FILEINFO.TYPE.BIN
>PUSHBI SYS.FOPEN.R
>PUSHW K.LoadEXEYA.Filename
jsr K.LoadFile
.9 bcs .99 Error Loading file
stx K.LoadEXEYA.hMem save hMem
pha YA=CODE+DATA size
tya
* clc CC from bcs .99
adc BIN.Relocate.Start Get AUXTYPE for actual Base Address
sta BIN.Relocate.End compute Range End=AUXTYPE+FILELEN
pla
adc BIN.Relocate.Start+1
sta BIN.Relocate.End+1
txa
jsr K.GetMemPtrA
>STYA ZPQuickPtr1 set ZPQuickPtr1 -> Code start
pha YA = actual load address
tya
sec
sbc BIN.Relocate.Start
sta BIN.Relocate.Offset Offset=ZPQuickPtr1-AUXTYPE
pla
sbc BIN.Relocate.Start+1
sta BIN.Relocate.Offset+1
ldy #H.BIN.CODE.LEN get Code Len
jsr BIN.SetupCodeEndPtr2
jsr BIN.RelocateEXE
bcs .98
>LDYA K.LoadEXEYA.Filename get back bin path
>SYSCALL SYS.NewPStrYA make a copy of this string
bcs .98
lda K.LoadEXEYA.hMem Keep X=hMem
jsr K.GetMemByIDA X unmodified
>STYA ZPQuickPtr1
lda (ZPQuickPtr1)
ora #S.MEM.F.CODE This is a code segment
sta (ZPQuickPtr1)
txa Get Back hMem
ldy #S.MEM.BIN
sta (ZPQuickPtr1),y
lda K.LoadEXEYA.hMem
tax return hMEM to Caller...
jsr K.GetMemPtrA
clc ...and Y,A=PTR to CS
rts
.98 pha
lda K.LoadEXEYA.hMem
jsr K.FreeMemA Discard Loaded Code
pla
sec
.99 rts
*--------------------------------------
K.LoadEXEYA.Filename .BS 2
K.LoadEXEYA.hMem .BS 1
*--------------------------------------
* BIN.InstallDRV
* In:
* pDrv = .DRV File Loaded Address
* Note:
* K.LoadEXEYA called from K.LoadDrvYA
* Already setup correctly pDrv,
* BIN.Relocate.Start,End
*--------------------------------------
BIN.InstallDRV ldy #H.BIN.DRV.CODE.O
lda (pDrv),y
clc
adc BIN.Relocate.Start Advance start From AUXTYPE to AUXTYPE+DRV code offset
sta BIN.Relocate.Start
iny
lda (pDrv),y
adc BIN.Relocate.Start+1
sta BIN.Relocate.Start+1
lda DevMgr.Free Offset = Target DRV address-(AUXTYPE+DRV OFFSET)
sec
sbc BIN.Relocate.Start
sta BIN.Relocate.Offset
lda DevMgr.Free+1
sbc BIN.Relocate.Start+1
sta BIN.Relocate.Offset+1
lda BIN.Relocate.End Compute DRVLen=End-start
sec
sbc BIN.Relocate.Start
sta BIN.InstallDRV.DRVLen
lda BIN.Relocate.End+1
sbc BIN.Relocate.Start+1
sta BIN.InstallDRV.DRVLen+1
lda DevMgr.Free
clc
adc BIN.InstallDRV.DRVLen
sta BIN.InstallDRV.DRVEnd
tay Save DRVEnd LO
lda DevMgr.Free+1
adc BIN.InstallDRV.DRVLen+1 A = DRVEnd HI
sta BIN.InstallDRV.DRVEnd+1
bcs .9 we crossed $FFFF, out of mem
cpy #DevMgr.HiMem
sbc /DevMgr.HiMem
bcs .9 No More Room to load Driver....
lda DevMgr.LastDevID
inc
cmp #K.DEV.MAX
bne .10 No Device Handle Left
lda #DEVMGR.ERROOH
sec
rts
.9 lda #DEVMGR.ERROOM
sec
rts
.10 sta DevMgr.LastDevID
jsr K.GetDevByIDA
>STYA ZPQuickPtr2 setup Ptr2 to dest HEADER
ldy #H.BIN.DRV.HEADER.O
lda (pDrv),y
clc
adc pDrv
sta ZPQuickPtr1
iny
lda (pDrv),y
adc pDrv+1
sta ZPQuickPtr1+1 set Ptr1 to Src HEADER
ldy #S.DEV-1
.1 lda (ZPQuickPtr1),y copy header to DevMgr.Table
sta (ZPQuickPtr2),y
dey
bpl .1
ldy #S.DEV.ID
lda DevMgr.LastDevID
sta (ZPQuickPtr2),y
dey #S.DEV.JMP+1 Setup Main JMP
lda DevMgr.Free+1
sta (ZPQuickPtr2),y
tax
dey #S.DEV.JMP
lda DevMgr.Free
sta (ZPQuickPtr2),y
sta ZPQuickPtr2 set Ptr2 to Dest CODE
stx ZPQuickPtr2+1
ldy #H.BIN.DRV.CODE.O
lda (pDrv),y
clc
adc pDrv
sta ZPQuickPtr1
iny
lda (pDrv),y
adc pDrv+1
sta ZPQuickPtr1+1 set Ptr1 to Src CODE
lda BIN.InstallDRV.DrvLen+1
eor #$ff
pha
lda BIN.InstallDRV.DrvLen
eor #$ff
tax
ldy #0
.2 inx Move CODE in LC
bne .3
pla
inc
beq .4
pha
.3 lda (ZPQuickPtr1),y
sta (ZPQuickPtr2),y
iny
bne .2
inc ZPQuickPtr1+1
inc ZPQuickPtr2+1
bra .2
.4 ldy #H.BIN.DRV.CODE.LEN
lda DevMgr.Free Make Ptr1 = code start
sta ZPQuickPtr1
clc
adc (pDrv),y
sta ZPQuickPtr2
iny
lda DevMgr.Free+1
sta ZPQuickPtr1+1
adc (pDrv),y
sta ZPQuickPtr2+1 Make ZPQuickPtr2 = ZPQuickPtr1 + CodeLen
jsr BIN.RelocateDRV
>LDYA BIN.InstallDRV.DrvEnd
>STYA DevMgr.Free
clc
rts
*--------------------------------------
BIN.InstallDRV.DrvLen .BS 2
BIN.InstallDRV.DrvEnd .BS 2
*--------------------------------------
BIN.SetupCodeEndPtr2
lda (ZPQuickPtr1),y
clc
adc ZPQuickPtr1
sta ZPQuickPtr2 Make ZPQuickPtr2 = ZPQuickPtr1 + CodeLen
iny
lda (ZPQuickPtr1),y
adc ZPQuickPtr1+1
sta ZPQuickPtr2+1
rts
*--------------------------------------
* BIN.Relocate___ :
* In :
* ZPQuickPtr1 = Ptr to Code
* ZPQuickPtr2 = End Of Code
*--------------------------------------
BIN.Relocate.Start .BS 2
BIN.Relocate.End .BS 2
BIN.Relocate.Offset .BS 2
*--------------------------------------
BIN.RelocateEXE ldy #H.BIN.HEADER+1
lda (ZPQuickPtr1),y
cmp /H.BIN.HEADER.BIN65
beq .1
cmp /H.BIN.HEADER.DRV65
beq .1
lda #SYSMGR.ERRIBIN
sec
rts
.1 ldy #H.BIN.JMP relocate Main JMP
lda (ZPQuickPtr1),y
clc
adc BIN.Relocate.Offset
sta (ZPQuickPtr1),y
iny
lda (ZPQuickPtr1),y
adc BIN.Relocate.Offset+1
sta (ZPQuickPtr1),y
ldy #H.BIN.EXE.REL.TABLE skip Header, CS.SIZE & DS.SIZE... (16 bytes)
.HS 2C bit abs
*--------------------------------------
BIN.RelocateDRV ldy #H.BIN.DRV.REL.TABLE
.1 lda (ZPQuickPtr1),y Start Relocate JMP table
tax LO in X
iny
ora (ZPQuickPtr1),y ORA with HI
beq .2 $0000 = end of table
dey
txa get back LO
clc
adc BIN.Relocate.Offset
sta (ZPQuickPtr1),y
iny
lda (ZPQuickPtr1),y
adc BIN.Relocate.Offset+1
sta (ZPQuickPtr1),y
iny
bra .1
*--------------------------------------
.2 tya add current offset in Y to Ptr
sec + 1 to skip last 00 from beq .2
adc ZPQuickPtr1
sta ZPQuickPtr1
bcc .3
inc ZPQuickPtr1+1 ZPQuickPtr1=Current Code PTR
.3 lda (ZPQuickPtr1) get OPCODE
lsr /2
tax
lda BIN.OPCODES,x get OPCODE definition
bcs .4 go get LO nibble
lsr
lsr move HI -> LO
lsr
lsr
.4 and #$0f
bit #$8 abs addressing?
beq .6 no....
and #7 save Opcode length...
pha
ldy #1
lda (ZPQuickPtr1),y Get LO
tax save LO in X
iny make Y point to HI
cpx BIN.Relocate.Start
lda (ZPQuickPtr1),y Get HI
sbc BIN.Relocate.Start+1
bcc .5 addr < BIN.Relocate.Start, out of range
txa Get back LO
cpx BIN.Relocate.End
lda (ZPQuickPtr1),y Get HI
sbc BIN.Relocate.End+1
bcs .5 addr > BIN.Relocate.End, out of range
txa Get back LO
* clc CC from bcs .6
adc BIN.Relocate.Offset add Offset to abs address
dey
sta (ZPQuickPtr1),y store relocated addr LO
iny
lda (ZPQuickPtr1),y Get HI
adc BIN.Relocate.Offset+1
sta (ZPQuickPtr1),y store relocated addr HI
.5 pla get back Opcode length...
.6 clc A = OPCODE length
adc ZPQuickPtr1
sta ZPQuickPtr1
bcc .7
inc ZPQuickPtr1+1
.7 eor ZPQuickPtr2 A = ZPQuickPtr1
bne .3
lda ZPQuickPtr1+1
eor ZPQuickPtr2+1
bne .3 next opcode....
.8 rts
*--------------------------------------
* 65C02 OPCODES
* Bit 3 : 1 = absolute addressing
* Bit 2-1-0 : opcode + @ length
*--------------------------------------
* 0.1.2.3.4.5.6.7.8.9.A.B.C.D.E.F
BIN.OPCODES .HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
.HS B.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
.HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
.HS 1.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
.HS 2.2.2.1.2.2.2.2.1.2.1.1.B.B.B.3
.HS 2.2.2.1.2.2.2.2.1.B.1.1.1.B.B.3
*--------------------------------------
MAN
SAVE SYS/KERNEL.S.BIN
LOAD SYS/KERNEL.S
ASM