A2osX/ProDOS.203/ProDOS.S.SEL2.txt

NEW
  AUTO 3,1
* object code = sel_2
*
* Alternate program selector segment for P8 when used in conjunction with
* gs/os. This code is used in place of the standard P8 interactive program
* selector when P8 is started up by GQuit. It is called when passing control
* from one application to another and the new application is 8-bit. This
* code first loads the specified P8 application at $2000 in bank 0 of memory.
* It then checks the message center for a possible name of a file. this file
* is passed on to the 8-bit application. This segment then passes control to
* the freshly loaded app. This code does NOT start with a CLD instruction
* (as other replacement quit code is supposed to do) because GQuit checks
* this to see if this version of quit code is available.

GQdisp			lda RRAMWRAMBNK1		read/write LC bank 1
				clc
				xce						16 bit native mode.
				jmp	P8QUIT				go to GQuit.
				.HS 0000000000			offset to paragraph boundary.
				.AS "GQ"				id bytes so GQuit can identify this

* load application
*
* Entry is in 16-bit native mode. Exit is in emulation mode.
*
* On entry and exit:
*	Data bank register is set to $00.
*	Direct register is set to $0000.
*	Stack pointer is set to $01FB.
*
* Inputs: acc = value of E1_OS_Switch (0 or 1, 1 = yes to switch)
*
* This code is moved to $00/1010 and executed there.

* first, copy the prefix passed from gs/os to our own volume name buffer
* so in case of an error setting the P8 prefix, it can be displayed in the
* error message.

				>SHORTM					8 bit accumulator

				pha						save the switch status.
				ldx	##inbuf				point to passed prefix.
				jsr copyvol				copy the name into the buffer.
				pla						retrieve the switch status

* go into emulation mode to load and run Prodos 8 application

				sec
				xce						8 bit emulation mode
				ora #$00				switching from P16 to P8 ?
				beq L602D				no.

* switching from P16 to P8 so pass prefix 0 from P16 to the P8 prefix. the
* prefix is passed at $00/0200 by GQuit.

L6020			jsr MLI					set prefix
				.DA #$C6
				.DA pfxparms
				bcc L602D				if prefix ok.
				jsr gqerror				error handler.
				bra L6020				try again

* load application at $2000

L602D			xce						native mode (carry clear)
				>LONGX					16 bit regs, 8 bit acc.
				lda pbuf+1				is the application name
				cmp #$2F				a complete pathname ?
				bne L603D				no, use prefix as volume name
				ldx ##pbuf				else use the application name.
				jsr copyvol				copy the volume name to buffer.
L603D			sec						back to emulation mode.
				xce
L603F			jsr MLI				  	open the application file
				.DA #$C8
				.DA opnparms
				bcc L604C				if open ok.
				jsr gqerror				handle error.
				bra L603F				try again.
L604C			lda oprefnum			copy ref number to parameter lists
				sta eofrefn
				sta rdrefnum
				sta closeref

* do a geteof call for how many bytes to read

L6058			jsr MLI				  	get eof
				.DA #$D1
				.DA eofparms
				bcc L6065				eof ok.
				jsr gqerror				handle error.
				bra L6058				try again.

* store the size of the file in the read parameter list

L6065			lda eofval
				sta rdcount
				lda eofval+1
				sta rdcount+1
L6071			jsr MLI				  	read
				.DA #$CA
				.DA readparm
				bcc L607E				read ok
				jsr gqerror
				bra L6071
L607E			jsr MLI				  	close
				.DA #$CC
				.DA closeprm
				bcc L608B				close ok
				jsr gqerror
				bra L607E
L608B			jsr dolaunch			check for possible 2nd pathname.
				bne L6099				if none then run program
				jsr ckfordrv			else make sure the file is online.
				bcc L6099				if so then run the program.
				lda #$45				volume not found error.
				bra L60AB
L6099			lda RROMBNK2			enable ROM
				jmp sysentry			execute the system application

gqerror			clc
				xce						16 bit native mode
				>LONGMX
				jsr mountvol			mount volume.
				bcs L60AB				if error.
				sec						back to emulation mode.
				xce
				rts

* generate a fatal error while running under Prodos 8.
* on input, acc = error code. this routine does not return.

L60AB			clc						native mode
				xce
				>LONGMX
				and ##$00FF				mask off high byte of error code.
				pha						put on stack for IntMath tool call.
				pea $0000				errval>>16
				pea errval				push address of string buffer.
				pea $0004				make string 4 digits long.
				>IIGS Int2Hex			convert value to hex string.
				pha						make space for return value.
				pea $0000				quitstr1>>16
				pea quitstr1			push first error message address
				pea $0000				quitstr2>>16
				pea quitstr2			push second error message address
				pea $0000				button1>>16
				pea button1				push first button text address
				pea $0000				quitbtn2>>16
				pea quitbtn2			push 2nd button text address (null)
				>IIGS TLTextMountVolume			 make the dialog box
				pla						retrieve button press (not used)
				sec						emulation mode
				xce
				jsr MLI				  	quit back to GQuit
				.DA #$65
				.DA quitparms

* p8 mount volume
*
* on entry: volbuf = name of volume to mount.
* on exit: carry clear if mount volume displayed and 'return' was pressed.
*		  carry set if no window displayed or if had window and 'esc' pressed.

mountvol 		ldy ##$0000				volbuf>>16
				ldx ##volbuf			set up pointer to volume name.

* if error is 'volume not found' or 'no disk in drive' then display the
* Mount Volume window, otherwise return with carry set.

				and ##$00FF				mask just in case.
				cmp ##$0045				volume not found ?
				beq L6101				yes
				cmp ##$002F				no disk in drive ?
				beq L6101				yes
				sec						indicate error not handled.
				rts						return with error code still in acc.

L6101			pha						save error code in case esc pressed.
				phy						pointer to volume name.
				phx
				tsc
				phd						save D reg.
				tcd						point D reg at stack.
				lda [$01]				get length byte and leading separator.
				dec						don't count leading separator.
				xba						then swap the bytes so the volume name
				sta [$01]				doesn't cpntain the separator.
				pha						room for result.
				pea $0000				mountmsg>>16
				pea mountmsg
				phy						hi word of pointer to volume name.
				inx						skip separator.
				phx						lo word of pointer to volume name.
				pea $0000				button1>>16
				pea button1				'Return'
				pea $0000				button2>>16
				pea button2				'Escape'
				>IIGS TLTextMountVolume
				lda [$01]				restore first 2 bytes of vilume name
				xba						back to their original positions
				inc						and values.
				sta [$01]
				pla						which button: 1=Return 2=Escape.
				pld						restore D reg.
				plx						pull volume name pointer off stack
				plx
				cmp ##$0001				which button was pressed ?
				bne L613C				if Escape pressed.
				clc						indicate Return was pressed.
				pla						pull original error code off stack.
				rts						return with carry clear.
L613C			sec						indicate Escape was pressed.
				pla						restore error code.
				rts						return with carry set.

* copy the volume name from the given pathname to the volume name buffer.
*
* inputs: x = length byte of complete pathname containing volume name.
* output: volume name is stored in volbuf.

copyvol			lda	>1,x				get the first slash
				sta volbuf+1
				ldy ##$0002				initialize the length count.

L6148			lda	>2,x				now copy the volume name up to
				cmp #$2F				the separating slash.
				beq	L6156
				sta	volbuf,y
				inx
				iny
				bra L6148
L6156			dey						fix character count.
				tya						length.
				sta	volbuf				store the resultant string length.
				rts

* translate a filename message from the message center to the currently
* launching P8 application if it can accept a second filename. If found,
* copy the filename into the application's filename buffer.
* on exit, the z-flag is set if a filename was correctly passed to the
* application elst the z-flag is clear if it couldn't be done.

dolaunch 		lda sysentry			does the app start with a jump ?
				cmp #$4C
				bne	L616F				no, doesn't follow the convention.
				lda	#$EE				check for the signature bytes.
				cmp sysentry+3
				bne L616F				1st one doesn't match, skip it.
				cmp sysentry+4
				beq L6170				both match, go get a filename message.
L616F			rts						just return to launch the app.

L6170			lda #$FF				put flag conditioning value on
				pha						the stack (assume error).
				clc						native 16-bit mode.
				xce
				>LONGMX
				pha						make room on stack for user id.
				>IIGS MMStartUp			start up the memory manager.
				pla						get the user id and
				pha						leave it on the stack.
				pha
				pha						make room on stack for new handle.
				pea $0000
				pea $000A				get a 10 byte block of memory.
				pha						put user id on stack.
				pea $0000				totally unrestricted block.
				pha						LocationPtr (not used)
				pha
				>IIGS NewHandle			go get the block of memory.
				pla						get the handle from the stack.
				plx
				bcs L620A				branch if error, no memory available.
				phx						leave the handle on the stack.
				pha
				pea $0002				'get' a message.
				pea $0001				get a type 1 (filename) message.
				phx						put the message handle on the stack
				pha						(still in acc and x regs)
				>IIGS MessageCenter
				bcs L6203				branch if no message.
				pha						leave 4 bytes free on stack
				pha						(will be used as a direct page pointer)
				tsc						get the stack pointer.
				phd						save current direct register.
				inc   					point to new direct page space.
				tcd						make a new direct page.
				lda [$04]				de-reference the handle.
				sta $00
				ldy ##$0002
				lda [$04],y
				sta $02
				ldy ##$0006				get the message command.
				lda [$00],y
				bne bad_msg				if print, then skip it.
				lda $00					adjust pointer to filename string.
				clc
				adc ##$0008
				sta $00
				bcc L61D1
				inc $02
L61D1			lda [$00]				get the length of the string.
				and ##$00FF				mask off high (leaving just the length)
				>SHORTM					8 bit accumulator
				cmp sysentry+5			check against length of app buffer.
				beq L61DF				if equal then continue with move.
				bcs bad_msg				if too long then bad message.
L61DF			tay	string length.
L61E0			lda [$00],y				get a character.
				sta sysentry+6,y		store it in the app's filename buffer
				sta inbuf,y				and in prefix buffer.
				dey
				bpl L61E0
				lda #$00				change flag conditioning value on stack
				sta $0D,s				to indicate a filename is passed.
bad_msg
				>LONGM					16-bit acc.
				pld						restore direct register.
				pla						fix stack because handle and userid
				pla						still on stack.
				pea $0003				now delete the message (done with it).
				pea $0001				message type 1.
				pha						garbage handle (not used).
				pha
				>IIGS MessageCenter		go delete the message.
L6203			>IIGS DisposeHandle		throw away message (handle is on stack)
L620A			>IIGS MMShutDown		shutdown the memory manager (userid is
				sec						on stack).
				xce						back to emulation mode.

				pla						condition z-flag with value on stack.
				bne L6231				then done.
				ldx inbuf				get length of pathname.
				lda #$2F				 look for slash.
L621B			cmp	inbuf,x
				beq L6225				when found, set prefix.
				dex
				bne L621B
				bra L6231				if no slash, just skip it.
L6225			dex						don't include trailing slash.
				stx inbuf				set new length.
				jsr MLI				  	set the P8 prefix.
				.DA #$C6
				.DA pfxparms
				lda #$00				set z-flag
L6231			rts						and go launch the app.

* check for disk volume
*
* on exit:
*	carry clear = disk was found
*	carry set = disk not found

ckfordrv 		clc						native mode
				xce
				>LONGX					16-bit regs, 8-bit acc.
				ldx ##sysentry+6		point to pathname buffer.
				jsr copyvol				copy volume name to pathname buffer.
.1				sec						emulation mode.
				xce
				jsr MLI				  	get info on the volume.
				.DA #$C4
				.DA gfiparms
				bcc .2			   		branch if volume found,
				clc						(native mode)
				xce
				>LONGMX
				jsr  mountvol			else ask user to mount the volume.
				bcc .1					if <return> pressed, then try again.
				sec						emulation mode.
				xce
				sec						disk not found.
.2				rts

* Prodos 8 parameter lists

pfxparms 		.DA #01					one parm.
				.DA inbuf				address of prefix.
opnparms 		.DA #3					3 parms.
				.DA pbuf				pathname
				.DA op_buf			   	i/o buffer
oprefnum 		.HS 00					reference #
eofparms 		.DA #02					2 parms
eofrefn			.HS 00					reference #
eofval			.HS 000000				3 byte eof value
readparm 		.DA #04					4 parms
rdrefnum 		.HS 00				  	reference #
				.DA sysentry			read into $2000 (bank 0).
rdcount			.HS 0000				# of bytes to read.
				.HS 0000				transfer count
closeprm 		.DA #1					1 parm
closeref 		.HS 00				 	reference #
quitparms 		.DA #04					4 parms.
				.HS 00					quit back to launcher (GQuit)
				.HS 0000
				.HS 00
				.HS 0000
gfiparms 		.DA #$0A				10 parms
				.DA volbuf			   	volume buffer
				.DA #0					access
				.DA #0					file type
				.DA 0				  	aux type
				.DA #0					storage type
				.DA 0				  	blocks used
				.DA 0				  	modification date
				.DA 0				  	modification time
				.DA 0				  	creation date
				.DA 0				  	creation time

* messages for P8 fatal error. maximum length of message is 35 characters.
* the error code will be displayed immediately after the final character.

quitstr1 		.DA #$1B
				.AS "Can't run next application."
quitstr2 		.DA #$14
				.AS "ProDOS Error = $"
errval			.AS "    "
quitbtn2 		.HS 00

* messages for P8 mount volume. maximum length of message is 35 characters.
* the button labels must not be more than 16 characters.

mountmsg 		.DA #$17
				.AS "Please insert the disk:"
button1			.DA #$0D
				.AS "Accept: "
				.DA #$1B				mousetext on
				.DA #$0F				inverse on
				.DA #$4D				mousetext return
				.DA #$0E				normal on
				.DA #$18				mousetext off
button2			.DA #$0B
				.AS "Cancel: Esc"
*--------------------------------------
MAN
SAVE USR/SRC/PRODOS.203/PRODOS.S.SEL2
LOAD USR/SRC/PRODOS.203/PRODOS.S
ASM