Apple-2-SW/A2osX
1
0
Fork 0
mirror of https://github.com/A2osX/A2osX.git synced 2024-10-31 23:09:33 +00:00
Code Issues Projects Releases Wiki Activity
d8631337dd
A2osX/SCMASM.30/SCMASM.S.DISK.txt

232 lines
6.6 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

NEW
AUTO 3,1
*--------------------------------------
SCI.TBLADR .EQ $AA00 Address of Command Table
SCI.LINBUF .EQ $BC80
SCI.STARTUP .EQ $BE00
SCI.COMMAND .EQ $BE03
SCI.ERROR .EQ $BE09
SCI.SLOT .EQ $BE3C
SCI.DRIVE .EQ $BE3D
SCI.STATE .EQ $BE42 0=immediate, else deferred
SCI.MLI .EQ $BE70 Call MLI, (A)=operation
SCI.RTS .EQ $BE9E
SCI.IOB.GETSET .EQ $BEB4 Get/Set File Info IOB
SCI.IOB.MISC .EQ $BEC6 Misc functions IOB
SCI.IOB.OPEN .EQ $BECB Open IOB
SCI.IOB.RW .EQ $BED5 Read/Write IOB
SCI.IOB.CLOSE .EQ $BEDD Close IOB
SCI.BUFFER.PAGES .EQ $BEF2,3,4 Buf1, Buf2, Exec
SCI.HIMEM.PAGE .EQ $BEFB
*--------------------------------
* LIST SOURCE CODE ON TEXT FILE
*--------------------------------
* TEXT.OPTIONS:
* TEXT <FILENAME> NO LINE NUMBERS
* TEXT#<FILENAME> WITH LINE NUMBERS
* TEXT%<FILENAME> WITH TAB.CHAR
*--------------------------------
TEXT LDX #0 00=NO LINE NUMBERS
STX TEXT.OPTIONS
JSR GNNB GET NEXT NON-BLANK CHAR
CMP #'# TEXT # MEANS WRITE LINE NUMBERS
BEQ .5 USE LINE NUMBERS
CMP #'% TEXT % MEANS WRITE CONTROL-I
BNE .6 NEITHER, WRITE TEXT ONLY
LDA TAB.CHAR
STA TEXT.OPTIONS
BNE .7 ...ALWAYS
.5 INC TEXT.OPTIONS
BNE .7 ...ALWAYS
.6 JSR BACKUP.CHAR.PNTR
.7 LDA #1 INTO "DEFERRED" STATE
STA SCI.STATE
JSR SAVE.PATHNAME
LDY #PQ.OPN
JSR ISSUE.DOS.COMMAND
LDY #PQ.WRT
JSR ISSUE.DOS.COMMAND
JSR SETUP.TEXT.POINTERS (PP --> SRCP, HIMEM --> ENDP)
.1 JSR CMP.SRCP.ENDP END OF RANGE YET?
BCS .4 ...YES
JSR GET.LINE.NUMBER
LDA TEXT.OPTIONS
BEQ .3 NO LINE #
BMI .2 TAB.CHAR
JSR CONVERT.LINE.NUMBER.PRINT
LDA #$20 SPACE AFTER LINE #
.2 JSR CHO
.3 JSR NTKN
BNE .2
JSR CRLF
JMP .1
.4 LDA #0 TRUNCATE REST OF FILE
JSR CHO
JMP SOFT
*--------------------------------
* .TF DIRECTIVE
*--------------------------------
* END EXISTING .TF IF ANY
* SET .TF FLAG ON
*
* PASS 1: THAT'S ALL
*
* PASS 2: OPEN THE FILE, WITH T=BIN
* SET MARK=EOF=0
* SET STARTING ADDRESS IN FILE-INFO
* WRITE START ADDRESS AND LENGTH
*--------------------------------
PSTF JSR TFEND CLOSE EXISTING TF IF ANY
SEC
ROR TF.FLAG SET FLAG ON
JSR LIST.LINE.BOTH.PASSES
LDA PASS WHICH PASS?
BEQ .9 ...PASS 1, EXIT NOW
JSR SAVE.PATHNAME
LDY #PQ.OPN
JSR ISSUE.DOS.COMMAND
*---Empty the file now-----------
LDA #0
STA SCI.IOB.MISC+2
STA SCI.IOB.MISC+3
STA SCI.IOB.MISC+4
LDA SCI.IOB.OPEN+5 REFNUM FOR TARGET FILE
STA TF.PRM TARGET FILE REF. NUM.
STA SCI.IOB.MISC+1
LDA #$CE SET MARK
JSR SCI.MLI
BCS JMP.PRODOS.ERR ...ERROR
LDA #$D0 SET EOF
JSR SCI.MLI
BCS JMP.PRODOS.ERR ...ERROR
*---Get current file info--------
LDA #10
STA SCI.IOB.GETSET
LDA #$C4 GET FILE INFO
JSR SCI.MLI
BCS JMP.PRODOS.ERR ...ERROR
*---Set proper file info---------
LDA #7 change IOB for set.file.info
STA SCI.IOB.GETSET
LDA SCI.IOB.GETSET+4 current file type
CMP #$04 is it type TXT?
BEQ .9 ...yes, make no changes
LDX #$2000 if type is SYS ($FF), force A=$2000
LDY /$2000
CMP #$FF is it type SYS?
BEQ .3 ...yes
LDX ORGN all other types, A=origin
LDY ORGN+1
.3 STX SCI.IOB.GETSET+5 new AuxType
STY SCI.IOB.GETSET+6
LDA #$C3 SET FILE INFO
JSR SCI.MLI
BCS JMP.PRODOS.ERR ...ERROR
.9 JMP ASM2 ...CONTINUE ASSEMBLY
*--------------------------------
JMP.PRODOS.ERR JMP PRODOS.ERROR
*--------------------------------
* OUTPUT (A) TO ALREADY OPENED DISK FILE
*--------------------------------
DOUT BIT DUMMY.FLAG
BMI .3 No output inside DUMMY section
STA TF.BUF Save in buffer outside zero-page
STX TF.SVX
LDX #4 copy parms to SCI parmblock
.1 LDA TF.PRM,X
STA SCI.IOB.RW+1,X
DEX
BPL .1 ...until all copied
LDA #$CB Write command code
JSR SCI.MLI
BCS JMP.PRODOS.ERR
LDX TF.SVX
LDA OBJ.BYTE
.3 RTS
*
TF.SVX .BS 1
TF.BUF .BS 1
TF.PRM .DA #*-*,TF.BUF,1
*--------------------------------
* TFEND - FINISH OFF A .TF SECTION
* CALLED FROM: .TF, .TA, .OR, .EN PROCESSORS
*
* IF NOT IN .TF NOW, RETURN IMMEDIATELY
* CLEAR .TF FLAG
* PASS 1 - THAT'S ALL TO DO
* PASS 2 - CLOSE FILE
*--------------------------------
TFEND ASL TF.FLAG TEST AND CLEAR FLAG SIMULTANEOUSLY
BCC .1 ...TF NOT ACTIVE, DO NOTHING
LDA PASS
BNE CLOSE.FILES ...PASS 2
.1 RTS
*--------------------------------
CLOSE.FILES
LDY #PQ.CLS
.HS 2C
FP LDY #PQ.FP
LDA #0
STA PATHNAME
*--------------------------------
* ISSUE DOS COMMAND WITH FILE NAME
* (Y)=QUOTE OFFSET FOR COMMAND
*
* SAVES AND RESTORES CHARACTER POINTER
* SO THAT FILE NAME CAN BE USED AGAIN.
*--------------------------------
ISSUE.DOS.COMMAND
LDX #$7F SAVE WBUF (0-127)
.1 LDA WBUF,X
STA SCI.LINBUF,X
DEX
BPL .1
.2 INX COPY PATHNAME INTO WBUF (5...)
LDA PATHNAME,X
STA WBUF+5,X
BNE .2
TAX X=0
.3 INX COPY COMMAND INTO WBUF (0...)
INY
LDA PQTS-1,Y
STA WBUF-1,X
BPL .3
STX SCI.STATE ALLOW DEFERRED COMMANDS
JSR PASS.CMD.TO.PRODOS
LDX #$7F RESTORE WBUF (0-127)
.4 LDA SCI.LINBUF,X
STA WBUF,X
DEX
BPL .4
RTS
*--------------------------------
SAVE.PATHNAME
LDX #0
.1 CPX #49
BCS .2
JSR GNNB
BCC .3
.2 LDA #0
.3 STA PATHNAME,X
INX
BCC .1
RTS
*--------------------------------
PQTS .EQ *
PQ.CLS .EQ *-PQTS
.AT /CLOSE/
PQ.OPN .EQ *-PQTS
.AT /OPEN /
PQ.WRT .EQ *-PQTS
.AT /WRITE/
PQ.LOD .EQ *-PQTS
.AT /LOAD /
PQ.FP .EQ *-PQTS
.AS /-BASIC.SYSTEM/
.HS 00FF
*--------------------------------------
MAN
SAVE usr/src/scmasm.30/scmasm.s.disk
LOAD usr/src/scmasm.30/scmasm.s
ASM
Reference in New Issue View Git Blame Copy Permalink