My motivation was to really push the MAME AY8910 emu code, as the Apple Mockingboard music (Skyfox, Ultima) wasn't really exercising it that hard. So as a little R&D proj, I thought I'd convert Dave Rogers' Spectrum 128 Cybernoid routine (written in 1988). Here's a summary of how I did it: . I got cybernoid.ay from http://www.worldofspectrum.org/projectay/gdmusic.htm . Split it into bin's with AYSplitR . Disassembled with Inkland's dz80w (www.inkland.org) . I wrote 6502 macros to replace the z80 opcodes . For cybernoid, I hand converted the z80 code to 6502 (using the macros) . I added a few extension to AppleWin's debugger to help debug the 6502 code (ACME symbol loading & ZP pointer support). I use Skyfox's MB detection routine. The Z80 regs are emulated with zero-page memory locations $F0..$F8 The playback routine is very inefficient, as it: . saves the ZP memory . restores the Z80 regs . runs the IRQ handler . saves the Z80 regs . restores the ZP memory This allows playback to work simultaneously with Applesoft & ProDOS. If DOS3.3 doesn't disable IRQs around disk I/O, then it won't work on a real Apple (under DOS3.3), but it'll still work on an emulator :-) I profiled the IRQ handler and IIRC, it takes about 20% of the frame on average. This is poor, but the code can easily be optimised. Remember this was really just a proof of concept. After this, I wrote a python script to do the Z80->6502, and quickly converted Cybernoid-II. Currently playback on real h/w produces noisy renditions of the tunes. I have replaced my AY-register update routine with the slower one used by Skyfox which gives better but not perfect results. Tom 25 March 2006