Penetrator-apple2/README.md

penetrator

Remake of the ZX Spectrum game for the Apple II.

1. INTRODUCTION

This is a "port" of the Commander X16 version that's also in my repo's as just penetrator. I had to rewrite quite a bit of the drawing code and make some other changes to make it work on the Apple II, and to make it fast enough.

This is also my very first program for the Apple II. It was a learning experience :)

2. CURRENT STATUS

The game is a pretty good replica of the original. It is missing sound. It's also missing the demo attract mode, and the fireworks.

3. TECHNICAL DETAILS

The game is written in 6502 assembly using the ca65 assembler.

Below is a CPU cycle profile of 1 game frame in stage 4. It's a busy frame with bullets, bombs and enemies. Most importantly, it has a busy terrain at the top and bottom.

| Hex | Dec | % of the | Item |

Cycles	Cycles	Frame
148F3	84211	100%	Total Frame
61F	1567	2.0%	inputGame
0A	10	0.0%	Misc
73	115	0.1%	gameWorldMove
05	5	0.0%	Misc
19	25	0.0%	gameCheckStage
08	8	0.0%	Misc
B80	2944	3.5%	gameAI
17	23	0.0%	Misc
7267	29287	34.8%	drawClearRows
6721	26401	31.4%	terrainDraw
38A8	14504	17.2%	drawEnemies
985	2437	2.9%	drawPlayer
581	1409	1.7%	drawBullets
6E3	1763	2.1%	drawBombs
E14	3604	4.3%	drawExplosions
06	6	0.0%	Misc
1A	26	0.0%	drawPresent
11	17	0.0%	Misc
3C	60	0.1%	Emulator error

As can be seen, clearing the area where the world will be drawn takes almost 35% of the frame and drawing the terrain takes another 31% of the frame. The Emulator Error are unaccounted for cycles -discrepency between total cycles at the start and end, vs. the cycles reported in each step. I modifies the emulator myself to do step reporting and I assume I must have missed someting.

4. KEYS and JOYSTICK

The Apple 2 gameplay works only with a joystick since you cannot detect multiple keys down on the Apple II. The UI works with the keyboard or joystick and the world editor uses both.

The joystick can also drive the menu's. Pressing right, for example, is equivalent to pressing 1 (the UI menu options are selected through numbers).

The menus all show the keys to advance. There's also a help screen in the editor.

5. THE FILES

I tried to comment all the code very thoroughly in the CX16 version. Since this version is derived from that version, the code is also well documented, but to be honest, the comments may not always be accurate. I did not do a pass to see if they are accurate.

There are actually 2 programs in this. The 1st is the game, and it's in src/apple2.

• defs.inc - Constants and definitions used throughout
• draw.inc - HGR buffer drawing. drawSprite, for example
• edit.inc - The built-in world editor
• file.inc - Load and Save code
• fontdata.inc - A ZX Spectrum font in reverse 8x8 - Apple II format
• game.inc - The in-game logic, AI etc. The bulk of the "game"
• input.inc - User controls for game and editor
• logo.hgr - 8Kb splash screen in HGR format
• logo.inc - File that simply does an incbin on logo.hgr
• logodata.inc - Line data for writing Penetrator and logo image data
• macros.inc - Print macros mostly
• penetrator.asm - Where the game starts, initial setup, etc.
• penetrator.cfg - ca65 configuration file
• rodata.inc - Read-only data such as lookup tables, sprites etc.
• terrain.inc - The terrain drawing routines
• text.inc - In game text and print functions
• trndata.inc - The world data (triplet - top, bottom and enemy pos)
• ui.inc - User facing screens, name input, etc.
• variables.inc - All non zero page variables (stats, scores, draw buffers)
• zpvars.inc - The zero page variables (most variables)

The second is the ProDos loader that will auto-load the game. It's in the src/apple2.loader folder. It has these files (all provided to me by Oliver Schmidt)

• loader.cfg - ca65 configuration file
• loader.s - file to load and start the game

6. BUILDING THE GAME

Making the game has a few steps. Use make and the Makefile on all OSs, that would be the easiest.

Start by making the loader - this needs to be done once only.
make TARGETS=apple2.loader

Next, make the game with:
make

The next step is to make a bootable disk image. For this, you will need some other piece of 3rd party software. It's called AppleCommander. Once downloaded, put it in the apple2 folder in the root (apple2 folder at same level as Makefile). This software will put the loader and game into the disk image.

Since I use Windows to develop, I have a file called build.cmd next to the Makefile (and checked in here as well). The contents of this file is listed below (where the line ends with "\" isn't actually a line-end, I just cut the line there for readability, the next line is actually on the same line as the line ending with "\").

copy apple2\template.dsk Penetrator.dsk
java -jar apple2\AppleCommander-win64-1.5.0.jar -p Penetrator.dsk \
penetrat.system sys < penetrator-apple2.apple2.loader
java -jar apple2\AppleCommander-win64-1.5.0.jar -as Penetrator.dsk \
penetrat bin < penetrator-apple2.apple2
apple2\Applewin.exe -d1 penetrator.dsk

You will need to install Java to use AppleCommander. The apple2/template.dsk is a "blank ProDos floppy" that has the loader and the game placed on it by AppleCommander. I use the AppleWin emulator to run the game (-d1 penetrator.dsk mounts the floppy in drive one, and then boots from it automatically). In powershell, when developing the game, I would just use this command to do it all:
make; .\build.cmd

Find AppleCommander here (I used Version 1.5.0):
https://github.com/AppleCommander/AppleCommander/releases

Find AppleWin here:
https://github.com/AppleWin/AppleWin/releases

7. CREDITS

• Phillip Mitchell and Beam Software for creating and publishing the game in 1982.
• A special call-out to Oliver Schmidt who provided me with invaluable assistance to get me going on the Apple II.
• Everyone involved in the Apple II projects (AppleWin | AppleCommander).
• Everyone involved in making the cc65 tools, it's very good.

8. CONTACT

Feel free to contact me at swessels@email.com if you have thoughts or suggestions.

Thank you
Stefan Wessels
16 December 2019 - Initial Revision