# GMail Apple II Email Gateway ## Motivation To connect an Apple IIGS to Gmail, allowing messages to be sent and received. I used Ewen Wannop (aka Speccie)'s SAM2 email client, running under GSOS 6.0.4. This should also work with GSOS 6.0.1. Speccie's website is here: - [speccie.uk](https://speccie.uk/software/) In order to communicate on today's Internet Transport Layer Security (TLS) is necessary. Retro machines such as the Apple II series lack the processor power to perform the necessary encryption, so it is necessary to have a proxy system in between the Apple II and Gmail's servers. This proxy machine can 'speak' in today's encrypted TLS protocols to Gmail, and in plaintext to our Apple II. I chose to use a Raspberry Pi 4 (2GB version) running the Raspbian Linux operating system version 10. ## Prerequisites - An Apple IIgs. Mine is a ROM01. - Enough memory I have a 4MB RAM card. - Enough disk space. I have a MicroDrive/Turbo with 32MB volumes. - A compatible ethernet card. I used an Uthernet II. - GSOS 6.0.1 or 6.0.4 installed. - Marinetti 3.0 installed. I used 3.0b11. - A Raspberry Pi running Raspbian 10 I don't cover any of the above in this README. You can find information [elsewhere](http://www.apple2.org/marinetti/) on how to set up Marinetti. ## Software Used I use three separate packages on the Raspberry Pi, as follows: - *Postfix* This is a full-featured mail tranfer agent. We will use it to send mail to the Gmail servers over the SMTPS port with TLS, and to act as a plaintext SMTP server for the local network. - *Fetchmail* Fetchmail is configured to pull down messages from a Gmail inbox and store it on the Raspberry Pi in `/var/mail/` using the IMAP protocol with TLS. - *Dovecot* Dovecot provides a POP3 server to the local network, serving the files in `/var/mail`. ## Principle of Operation ### Incoming Messages - Message is sent to Gmail username@gmail.com - Fetchmail runs as a service on the Pi and monitors GMail using IMAP IDLE. As soon as a message shows up in the INBOX it downloads it and places it in `/var/mail/pi` (for username `pi`). Fetchmail leaves the email on the Gmail server (this can be changed if desired.) - SAM2 mail client on the Apple IIgs is configured to use the IP of the Raspberry Pi as its POP3 email server. When it asks for new messages, Dovecot will serve the request on port 110. When messages are downloaded using POP3, they are deleted from `/var/mail/pi` on the Raspberry Pi. ### Outgoing Messages - The SAM2 mail client on the Apple IIgs is configured to use the IP of the Raspberry Pi as its SMTP server. Outgoing emails are sent to port 25 on the Raspberry Pi. - Postfix handles the plaintext SMTP dialog with SAM2 mail and relays the message to Gmail's servers using SMTPS with TLS. ## Installing the Packages on Rasbian Install the packages with root privs on the Pi: ``` sudo apt update sudo apt upgrade sudo apt install postfix postfix-pcre sudo apt install dovecot-common dovecot-pop3d sudo apt install fetchmail ``` ## Obtaining App Passwords from Google ## Configuring the Packages ### Postfix The Postfix MTA configuration files are in `/etc/postfix`. Of the three packages, Postfix is the most complex to configure and has many available options. [This](https://www.linode.com/docs/email/postfix/postfix-smtp-debian7/) page was helpful for configuring Postfix. Be aware that this configuration amounts to an open relay from unsecured SMTP to SMTPS, and must never be place on the public internet, or it will be abused by spammers! Keep it on your private LAN segment only! We will modify a number of configuration files: - `/etc/postfix/command_filter` - `/etc/postfix/main.cf` - `/etc/postfix/master.cf` - `/etc/postfix/sasl/sasl_passwd` - `/etc/postfix/sasl/sasl_passwd.db` Once Dovecot has been configured, the service may be controlled as follows: - `systemctl start postfix` - start service. - `systemctl stop postfix` - stop service. - `systemctl status postfix` - status of service. #### `command_filter` For some reason, SAM2 sends a bunch of mail headers *after* the email message has been tranmitted to Postfix's SMTP server. Postfix gets very unhappy about this. The solution is to filter them out using Postfix's `smtpd_command_filter` function. The `command_filter` files contains the regular expressions to filter out these unwanted headers: ``` /^Message-ID:.*$/ NOOP /^MIME-version:.*$/ NOOP /^Content-Type:.*$/ NOOP /^Content-transfer-encoding:.*$/ NOOP /^From:.*$/ NOOP /^To:.*$/ NOOP /^In-Reply-To:.*$/ NOOP /^Subject:.*$/ NOOP /^Date:.*$/ NOOP /^X-Mailer:.*$/ NOOP ``` #### `main.cf` This is the main Postfix configuration file. I adjusted `smtpd_use_tls = no` to turn off TLS for the SMTP service offered to the Apple II and added `smtpd_command_filter = pcre:/etc/postfix/command_filter` to activate the filter discussed above. `relayhost = [smtp.gmail.com]:587` will forward email to Gmail's SMTPS server. I adjusted `smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination` to allow network hosts listed in `mynetworks` to relay messages to the `relayhost`. My home network is 192.168.10.0/24, so I added it here: `mynetworks = 192.168.10.0/24 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128`. You should adjust this line to match your own LAN subnet. Finally I added the following block of settings to enabled SASL authentication when talking to Gmail: ``` # Enable SASL authentication smtp_sasl_auth_enable = yes # Disallow methods that allow anonymous authentication smtp_sasl_security_options = noanonymous # Location of sasl_passwd smtp_sasl_password_maps = hash:/etc/postfix/sasl/sasl_passwd # Enable STARTTLS encryption smtp_tls_security_level = encrypt # Location of CA certificates smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt ``` The whole thing looks like this: ``` # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Raspbian) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on # fresh installs. compatibility_level = 2 # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. relayhost = [smtp.gmail.com]:587 smtpd_command_filter = pcre:/etc/postfix/command_filter smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination #smtpd_recipient_restrictions = permit_mynetworks myhostname = raspberrypi.home alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $myhostname, raspberrypi, localhost.localdomain, , localhost mynetworks = 192.168.10.0/24 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all # Enable SASL authentication smtp_sasl_auth_enable = yes # Disallow methods that allow anonymous authentication smtp_sasl_security_options = noanonymous # Location of sasl_passwd smtp_sasl_password_maps = hash:/etc/postfix/sasl/sasl_passwd # Enable STARTTLS encryption smtp_tls_security_level = encrypt # Location of CA certificates smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt ``` #### `master.cf` `master.cf` does not need to be modified other than to enable `smtpd` by uncommenting the following line: ``` # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (never) (100) # ========================================================================== smtp inet n - y - - smtpd ``` If you require verbose debugging information to get the SMTP connection working, change the line as follows: ``` smtp inet n - y - - smtpd y ``` #### `sasl/sasl_passwd` and `sasl/sasl_passwd.db` Create the directory `/etc/postfix/sasl`. Create the file `/etc/postfix/sasl_passwd` as follows: ``` [smtp.gmail.com]:587 username@gmail.com:xxxx xxxx xxxx xxxx ``` where `username` is your Gmail account name and `xxxx xxxx xxxx xxxx` is the App Password Google gave you. Run: `sudo postmap /etc/postfix/sasl_passwd` to build the hash file `sasl_passwd.db`. ### Dovecot The Dovecot POP3 server configuration files are in `/etc/dovecot`. I had to edit the following two files (starting from the default Raspbian package): - `/etc/dovecot/conf.d/10-auth.conf` - `/etc/dovecot/conf.d/10-master.conf` Once Dovecot has been configured, the service may be controlled as follows: - `systemctl start dovecot` - start service. - `systemctl stop dovecot` - stop service. - `systemctl status dovecot` - status of service. #### `10-auth.conf` The only non-comment lines are as follows: ``` disable_plaintext_auth = no auth_mechanisms = plain !include auth-system.conf.ext ``` #### `10-master.conf` I enabled the POP3 service on port 110 by uncommenting the `port = 110` line as follows: ``` service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { #port = 995 #ssl = yes } } ``` ### Fetchmail Fetchmail's configuration is in the file `/etc/fetchmail`. It should look like this: ``` set postmaster "pi" set bouncemail set no spambounce set softbounce set properties "" poll imap.gmail.com with proto IMAP auth password user 'username' is pi here password 'xxxx xxxx xxxx xxxx' ssl, sslcertck, idle ``` Replace the `xxxx xxxx xxxx xxxx` with the App Password Google gave you. Replace `username` with your email account name. Make sure the permissions on the configuration file are okay: ``` chmod 600 /etc/fetchmailrc chown fetchmail.root /etc/fetchmailrc ``` Edit `/etc/default/fetchmail` to enable the Fetchmail service: ``` START_DAEMON=yes ``` Service controls: - `systemctl start fetchmail` - start service. - `systemctl stop fetchmail` - stop service. - `systemctl status fetchmail` - status of service. ## Testing Log messages from all these packages are written to `/var/log/mail.log`. You can test the Postfix SMTP server using `telnet`. Be aware that it may not work the same way from the Pi (ie: localhost) than from a different machine on your LAN, so it is better to connect from another host. Connect to SMTP like this `telnet raspberrypi 25`. Typing the following commands should send an email: ``` HELO myhost.mydomain.com MAIL FROM: RCPT TO: DATA Subject: Test message This is just a simple test. . ``` The final period on its own serves to terminate the message and signal to Postfix that it should process the DATA block and enqueue the message. ## Configuring SAM2 Email Client on the GS Configuring the client is simple: - Incoming mail via POP3 - Hostname: hostname or IP address of your Raspberry Pi - Port: Default (110) - Username and password: Your Raspberry Pi account credentials - Outgoing mail via SMTP - Hostname: hostname or IP address of your Raspberry Pi - Port: Default (25) - Username and password: Your Raspberry Pi account credentials Bobbi Jun 17, 2020 *bobbi.8bit@gmail.com*