I thought I already fixed a2serverVersion

This branch of a2server only supports jessie and above, either Raspbian
or Debian.  While I was at it, I simplified the tests for what is and is
not a supported OS.  If there are bad kernels or firmwares we need to
work around those should be fixes.  This also means giving the user an
option to interrupt the installation if they are trying to install on a
Debian(ish) system that is too old or (more likely) too new.

At least ivan.sh is now using a2cloud's system_ident script.

install.sh

@@ -8,21 +8,74 @@
 # scripts themselves.  Software used or installed by these scripts is subject
 # to other licenses.  This work is published from the United States.
 
-a2serverVersion="1.9.0"
+a2serverVersion="1.9.0"  # Leave this quoted!
-a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/master"
 
-# Find the path of our source directory
+if test "x$BASH" = "x"; then
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )"
+	printf "This script requires bash. Please run\nit as ./install.sh from the source\ndirectory.\n"
-echo $a2source
-pushd $a2sSource >/dev/null
-a2sSource="$PWD"
-popd >/dev/null
-if [[ ! -f "$a2sSource/.a2server_source" ]]; then
-	printf "\na2server: cannot find a2server source directory in $a2sSource.\n\n"
 	exit 1
 fi
 
-# Run the legacy setup script for anything not yet ported
+# Find the path of our source directory
-if [[ -e "${a2sSource}/setup/ivan.sh" ]]; then
+top_src="$( dirname "${BASH_SOURCE[0]}" )"
-	"${a2sSource}/setup/ivan.sh" "$@"
+pushd $top_src >/dev/null
+top_src="$PWD"
+popd >/dev/null
+if [[ ! -f "$top_src/.a2server_source" ]]; then
+	printf "\na2server: cannot find a2server source directory in $top_src.\n\n"
+	exit 1
+fi
+
+noPicoPkg=
+autoAnswerYes=
+
+process_args() {
+	while [[ $1 ]]; do
+		if [[ $1 == "-c" ]]; then
+			shift
+			noPicoPkg="-c"
+		elif [[ $1 == "-y" ]]; then
+			shift
+			autoAnswerYes="-y"
+		else
+			shift
+		fi
+	done
+}
+
+process_args "$@"
+
+# FIXME: Show version, changes, config, allow reconfig, etc…
+"$top_src/scripts/show_changes"
+cat <<EOF
+
+Your system will be set up for a2server, providing you with
+AppleTalk for your Apple IIgs/IIe and Macintosh systems using
+netatalk, as well as SMB via Samba.
+
+If a2server is already installed, it will be upgraded to the
+latest version.  It would sure be handy if we had an up to
+date website to send you to for details.  You should harass
+iKarith about that if you haven't recently.
+
+A full installation could take quite awhile on very low-end
+systems like the Raspberry Pi Zero.
+
+Also, some actions will need to be performed as the root
+(administrator) user.  We are assuming you have access to the
+sudo command for that.
+EOF
+if [[ ! $autoAnswerYes ]]; then
+	printf "\nContinue? "
+	read
+	if [[ ${REPLY:0:1} != "Y" && ${REPLY:0:1} != "y" ]]; then
+		[[ $0 == "-bash" ]] && return 2 || exit 2
+	fi
+fi
+
+# Fix any mistakes we've made in previous versions
+. "$top_src/scripts/fixup"
+
+# Run the legacy setup script for anything not yet ported
+if [[ -e "${top_src}/setup/ivan.sh" ]]; then
+	"${top_src}/setup/ivan.sh" "$@"
 fi

scripts/a2server-1-storage.txt

@@ -2,24 +2,10 @@
 # vim: set tabstop=4 shiftwidth=4 noexpandtab filetype=sh:
 
 # --- Setting up the share volume
-
-# 1.3.0: move /media/A2SHARED (pre-1.3.0) to /srv/A2SERVER
-if [[ -d /media/A2SHARED ]]; then
-	echo "A2SERVER: Moving /media/A2SHARED to /srv/A2SERVER..."
-	sudo /etc/init.d/netatalk stop &> /dev/null
-	sudo /etc/init.d/samba stop &> /dev/null
-	[[ ! -d /srv ]] && sudo mkdir -p /srv
-	sudo mv /media/A2SHARED /srv/A2SERVER
-	sudo sed -i 's|/media/A2SHARED|/srv/A2SERVER|g' /usr/local/etc/netatalk/AppleVolumes.default
-	if [[ -f /etc/samba/smbd.conf ]]; then
-		sudo sed -i 's|/media/A2SHARED|/srv/A2SERVER|g' /etc/samba/smbd.conf
-	fi
-fi
-
 if [[ ! -d /srv/A2SERVER ]]; then
 	echo "A2SERVER: Preparing the shared files volume..."
-	sudo mkdir -p /srv/A2SERVER
+	mygroup="$(id -ng)"
-	sudo chown $USER:$USER /srv/A2SERVER
+	sudo install -d -m 755 -u "$USER" -g "$mygroup" "/srv/A2SERVER"
 else
 	echo "A2SERVER: Shared volume is already prepared for use."
 fi

scripts/a2server-2-tools.txt

@@ -8,12 +8,12 @@ a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/master"
 a2sBinaryURL="http://blocksfree.com/downloads"
 
 # Find the path of our source directory
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )/.."
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
-pushd $a2sSource >/dev/null
+pushd $top_src >/dev/null
-a2sSource="$PWD"
+top_src="$PWD"
 popd >/dev/null
-if [[ ! -f "$a2sSource/.a2server_source" ]]; then
+if [[ ! -f "$top_src/.a2server_source" ]]; then
-	printf "\na2server: cannot find a2server source directory in $a2sSource.\n\n"
+	printf "\na2server: cannot find a2server source directory in $top_src.\n\n"
 	exit 1
 fi
 
@@ -184,13 +184,13 @@ a2sTools="afpsync afptype mkatinit mkvolinfo cppo debupdate"
 a2sHelp="a2server-help.txt"
 a2sConfScripts="a2server-aliases a2serverrc"
 for _tool in $a2sTools; do
-	sudo install -m 755 "$a2sSource/scripts/tools/$_tool" "/usr/local/bin/$_tool"
+	sudo install -m 755 "$top_src/scripts/tools/$_tool" "/usr/local/bin/$_tool"
 done
 for _help in $a2sHelp; do
-	sudo install -m 644 "$a2sSource/scripts/tools/$_help" "/usr/local/etc/$_help"
+	sudo install -m 644 "$top_src/scripts/tools/$_help" "/usr/local/etc/$_help"
 done
 for _confscript in $a2sConfScripts; do
-	sudo install -m 755 "$a2sSource/scripts/tools/$_confscript" "/usr/local/etc/$_tool"
+	sudo install -m 755 "$top_src/scripts/tools/$_confscript" "/usr/local/etc/$_tool"
 done
 
 # 1.3.0: a2serverrc is now called from /etc/bash.bashrc,

scripts/a2server-3-sharing.txt

@@ -48,7 +48,7 @@ if [[ -f /usr/local/etc/A2SERVER-version ]]; then
 	read a2sVersion </usr/local/etc/A2SERVER-version
 fi
 # If A2SERVER 101 or greater is installed, we already did this and can skip it.
-if [[ "$a2sVersion" != *.*.* && "$a2sVersion" -lt 101 ]]; then
+if [[ "$a2sVersion" != *.*.* || "$a2sVersion" -lt 101 ]]; then
 	echo "A2SERVER: Installing Netatalk (this will take a while)..."
 	# stop Netatalk and samba if running (during upgrade)
 	if [[ $(ps --no-headers -C afpd) ]]; then

scripts/a2server-5-netboot.txt

@@ -11,12 +11,12 @@ a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/master"
 a2sBinaryURL="http://blocksfree.com/downloads"
 
 # Find the path of our source directory
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )/.."
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
-pushd $a2sSource >/dev/null
+pushd $top_src >/dev/null
-a2sSource="$PWD"
+top_src="$PWD"
 popd >/dev/null
-if [[ ! -f "$a2sSource/.a2server_source" ]]; then
+if [[ ! -f "$top_src/.a2server_source" ]]; then
-	printf "\na2server: cannot find a2server source directory in $a2sSource.\n\n"
+	printf "\na2server: cannot find a2server source directory in $top_src.\n\n"
 	exit 1
 fi
 
@@ -263,7 +263,7 @@ if [[ ! $autoAnswerYes || -f /tmp/a2server-setupNetBoot ]]; then
 		|| [[ ! -f /usr/local/bin/mkvolinfo ]] \
 		|| [[ ! -f /usr/local/bin/afpsync ]] \
 		|| [[ ! -f /usr/local/bin/cppo ]]; then
-			"$a2sSource/scripts/a2server-2-tools.txt"
+			"$top_src/scripts/a2server-2-tools.txt"
 		fi
 
 		# put BASIC.SYSTEM at root for ProDOS 8 startup
@@ -522,7 +522,7 @@ if [[ ! $autoAnswerYes || -f /tmp/a2server-setupNetBoot ]]; then
 		echo "A2SERVER: Updating ProDOS 8 Thunderclock driver year table..."
 		mkdir -p /tmp/netboot
 		rm -r /tmp/netboot/* 2> /dev/null
-		p8ClockPatch="$a2sSource/scripts/clock.patch.py"
+		p8ClockPatch="$top_src/scripts/clock.patch.py"
 		updateP8YearTables $(python $p8ClockPatch $(LANG=C date +"%a %m/%d/%y"))
 
 		gsosInstalled=""

scripts/fixup

@@ -0,0 +1,69 @@
+#! /bin/bash
+# vim: set tabstop=4 shiftwidth=4 noexpandtab filetype=sh:
+
+# fixup - correct any mistakes from previous versions
+#
+# To the extent possible under law, T. Joseph Carter and Ivan Drucker have
+# waived all copyright and related or neighboring rights to the a2server
+# scripts themselves.  Software used or installed by these scripts is subject
+# to other licenses.  This work is published from the United States.
+
+# The idea behind this script is to prevent other scripts from becoming a
+# minefield of ancient and deprecated code designed to compensate for other
+# even more ancient and replaced code that is no longer needed, no longer
+# useful, and honestly complicates maintenance of that code.  Everything here
+# will explain what it does, when it was put here, and it should remain clear
+# when the legacy code may be removed.
+#
+# The use of functions which get immediately called is to try and prevent the
+# long spidery conditional blocks a2cloud was originally known for.
+
+# # Added 2000-00-00
+# fix_some_stupid_mistake()
+# {
+# 	# Needed until: Upgrades from 0.0.0 no longer supported
+# 	:
+# }
+# fix_some_stupid_mistake
+
+
+# Added 2018-09-07
+move_media_a2shared()
+{
+# 	# Needed until: Upgrades from versions < 1.3.0 are not supported
+	local netatalk_restart
+	if [[ -d /media/A2SHARED ]]; then
+		cat <<-EOF
+			a2server: As of version 1.3.0, the standard location for
+			          netatalk to store Apple II files is /srv/A2SERVER.
+			          We will move /media/A2SHARED to the new location.
+			          If you need to do that yourself (you'll know if
+			          you do), press ctrl-c now.  Otherwise press Return.
+		EOF
+		read
+
+		# netatalk doesn't much like its sharepoint just disappearing
+		if service netatalk status >/dev/null; then
+			netatalk_restart=1
+			sudo service netatalk stop
+		fi
+
+		# Debated: Create /media/A2SHARED symlink? Nah, bad idea.
+		sudo mv /media/A2SHARED /srv/A2SERVER
+		sudo sed -i 's|/media/A2SHARED|/srv/A2SERVER|g' /usr/local/etc/netatalk/AppleVolumes.default
+		if [[ $netatalk_restart ]]; then
+			sudo service netatalk start
+		fi
+
+		# Samba can just be reloaded after modifying the config
+		if [[ -f /etc/samba/smbd.conf ]]; then
+			sudo sed -i 's|/media/A2SHARED|/srv/A2SERVER|g' /etc/samba/smbd.conf
+			if service smbd status >/dev/null; then
+				sudo service smbd reload
+			elif service samba status >/dev/null; then
+				sudo service samba reload
+			fi
+		fi
+	fi
+}
+move_media_a2shared

scripts/show_changes

@@ -0,0 +1,33 @@
+#! /bin/bash
+# vim: set tabstop=4 shiftwidth=4 noexpandtab filetype=sh:
+
+# show_changes - show a2server version differences
+#
+# To the extent possible under law, T. Joseph Carter and Ivan Drucker have
+# waived all copyright and related or neighboring rights to the a2server
+# scripts themselves.  Software used or installed by these scripts is subject
+# to other licenses.  This work is published from the United States.
+
+# Find the path of our source directory
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
+pushd $top_src >/dev/null
+top_src="$PWD"
+popd >/dev/null
+if [[ ! -f "$top_src/.a2server_source" ]]; then
+	printf "\na2server: cannot find a2server source directory in $top_src.\n\n"
+	exit 1
+fi
+
+newVersion=$(grep '^a2serverVersion' "$top_src/install.sh" | cut -d '"' -f 2)
+
+if [[ -f /usr/local/etc/A2SERVER-version ]]; then
+	read installedVersion </usr/local/etc/A2SERVER-version
+	if [[ $installedVersion != *.*.* ]]; then
+		# Deal with old three-digit version
+		installedVersion="${installedVersion:0:1}.${installedVersion:1:1}.${installedVersion:2}"
+	fi
+fi
+echo "a2server version available: $newVersion"
+echo "a2server version installed: ${installedVersion:-None}"
+
+# FIXME: Do something useful with a changelog perhaps?

scripts/system_ident

@@ -0,0 +1,44 @@
+#! /bin/bash
+# vim: set tabstop=4 shiftwidth=4 noexpandtab filetype=sh:
+
+# system_ident - identify your system for raspple2 if needed
+#
+# To the extent possible under law, T. Joseph Carter and Ivan Drucker have
+# waived all copyright and related or neighboring rights to the a2server
+# scripts themselves.  Software used or installed by these scripts is subject
+# to other licenses.  This work is published from the United States.
+
+if [[ -z $ras2_os || -z $ras2_arch ]]; then
+	ras2_os="unknown"
+	if hash lsb_release 2>/dev/null; then
+		if [[ -f /usr/bin/raspi-config ]]; then
+			ras2_os="rpi-$(lsb_release -cs)"
+		else
+			case "$(lsb_release -is)" in
+				Debian)
+					ras2_os="debian-$(lsb_release -cs)"
+					;;
+				*)
+					printf "\nUnknown OS with lsb_release\n"
+					lsb_release -a
+					;;
+			esac
+		fi
+	else
+		uname_s="$(uname -s)"
+		case "$uname_s" in
+			Darwin)
+				ras2_os="$uname_s"
+				;;
+			*)
+				printf "\nUnknown OS with uname -s\n$uname_s\n"
+				;;
+		esac
+	fi
+	ras2_arch="$(uname -m)"
+	export ras2_os ras2_arch
+fi
+
+if [[ $1 != -q ]]; then
+	printf "ras2_os=\"%s\"\nras2_arch=\"%s\"\n" "$ras2_os" "$ras2_arch"
+fi

setup/index.txt

@@ -12,18 +12,18 @@ a2sBranch="master"
 a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/${a2sBranch}"
 a2sTarball="https://github.com/RasppleII/a2server/archive/${a2sBranch}.tar.gz"
 
-# Set a2sSource to the location of the source tree if we're running in one
+# Set top_src to the location of the source tree if we're running in one
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )/.."
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
-if [[ -f "$a2sSource/.a2server_source" ]]; then
+if [[ -f "$top_src/.a2server_source" ]]; then
-	pushd $a2sSource >/dev/null
+	pushd $top_src >/dev/null
-	a2sSource="$PWD"
+	top_src="$PWD"
 	popd >/dev/null
 
 	cat <<-EOT
 	This script exists solely for backward-compatibility with IvanX's a2server
 	website and aliases installed by older versions.  You appear to have an
 	a2server source directory here:
-	 	$a2sSource
+	 	$top_src
 
 	Please run ./install.sh in that directory.  Thanks!
 
@@ -76,18 +76,18 @@ if [[ ! $autoAnswerYes ]]; then
 	fi
 fi
 
-a2sSource=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
+top_src=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
 
 # Normally tarballs unpack in a subdirectory, but we want it to unpack into
-# $a2sSource directly (even though the directory has the tarball in it.)
+# $top_src directly (even though the directory has the tarball in it.)
-printf "\na2server: Downloading installer to $a2sSource.\n"
+printf "\na2server: Downloading installer to $top_src.\n"
-wget -O "$a2sSource/a2server-$a2sBranch.tar.gz" "$a2sTarball"
+wget -O "$top_src/a2server-$a2sBranch.tar.gz" "$a2sTarball"
-tar -C $a2sSource --strip-components=1 -zxf "$a2sSource/a2server-${a2sBranch}.tar.gz"
+tar -C $top_src --strip-components=1 -zxf "$top_src/a2server-${a2sBranch}.tar.gz"
 
 # Now we actually run the installer as if we were installing it by hand
 printf "\na2server: Running the installer now.\n"
-"${a2sSource}/install.sh" "$@"
+"${top_src}/install.sh" "$@"
 
 # Clean up and delete the installer we downloaded
-printf "\na2server: Finished with installer, now deleting ${a2sSource}.\n"
+printf "\na2server: Finished with installer, now deleting ${top_src}.\n"
-rm -rf "$a2sSource"
+rm -rf "$top_src"

setup/ivan.sh

@@ -6,31 +6,23 @@
 # netatalk configured for Apple II use on Debian or Raspbian.
 # more info is at http://ivanx.com/a2server
 
-a2serverVersion="1.9.0"
-a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/master"
-
 # Find the path of our source directory
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )/.."
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
-pushd $a2sSource >/dev/null
+pushd $top_src >/dev/null
-a2sSource="$PWD"
+top_src="$PWD"
 popd >/dev/null
-if [[ ! -f "$a2sSource/.a2server_source" ]]; then
+if [[ ! -f "$top_src/.a2server_source" ]]; then
-	printf "\na2server: cannot find a2server source directory in $a2sSource.\n\n"
+	printf "\na2server: cannot find a2server source directory in $top_src.\n\n"
 	exit 1
 fi
 
-compare_version="$a2sSource/scripts/compare_version"
+# Make sure ras2_{os,arch} get set
+. "$top_src/scripts/system_ident" -q
 
-isRpi=
+# This is now in install.sh, get it from there
-[[ -f /usr/bin/raspi-config ]] && isRpi=1
+a2serverVersion=$(grep '^a2serverVersion' "$top_src/install.sh" | cut -d '"' -f 2)
 
-isDebian=
+compare_version="$top_src/scripts/compare_version"
-if [[ "$(lsb_release -ds)" = Debian* ]]; then
-	debianVersion="$(lsb_release -rs)"
-	if [[ "$debianVersion" -ge 7 || $debianVersion == [a-z]* ]]; then
-		isDebian=1
-	fi
-fi
 
 if [[ -f /usr/local/etc/A2SERVER-version ]]; then
 	read installedVersion </usr/local/etc/A2SERVER-version
@@ -39,9 +31,7 @@ if [[ -f /usr/local/etc/A2SERVER-version ]]; then
         installedVersion="${installedVersion:0:1}.${installedVersion:1:1}.${installedVersion:2}"
     fi
 fi
-echo "A2SERVER version available: $a2serverVersion"
+if [[ $installedVersion != *.*.* ]]; then
-echo "A2SERVER version installed: ${installedVersion:=None}"
-if [[ $installedVersion == "None" ]]; then
 	installedVersion=0
 fi
 
@@ -113,46 +103,32 @@ fi
 a2server_update=0
 doSetup=1
 
-if "$compare_version" $installedVersion lt 1.5.2; then
+if [[ "$installedVersion" != "0" ]] && "$compare_version" $installedVersion lt 1.5.2; then
 	a2server_update=1
 fi
 
 unsupportedOS=1
-if [[ $isRpi ]]; then #supported Raspbian? (16-Feb-15, 20-Jun-14, 09-Jan-14, etc)
+if [[ $ras2_os == debian-* || $ras2_os == rpi-* ]]; then
-	fwhash=$(zcat /usr/share/doc/raspberrypi-bootloader/changelog.Debian.gz | grep -m 1 'as of' | awk '{print $NF}')
+	read debianVersion < /etc/debian_version
-	fwsupported="-8aca5762- -462f3e3f476f7b6- -c32bc633039cd9- -9d34d0475f9-
+	if [[ $debianVersion == *.* ]]; then
-			-d4f5315cfac4e- -6f4a90c8cb8817f- -5dd9b4962e- -17c8799375-
+		if (( ${debianVersion%.*} >= 8 && ${debianVersion%.*} < 10 )); then
-			-960832a6c2590635216c296b6ee0bebf67b21d50-
-			-2a329e0c7d8ea19c085bac5633aa4fccee0f21be-
-			-b2420fc150ae4616f5d9ec24bdaedc630586a529-"
-	if [[ "$fwsupported" == *-$fwhash-* ]]; then
 			unsupportedOS=
 		fi
-elif [[ $isDebian ]]; then # supported Debian?
-	 debianVersion=$(cat /etc/debian_version)
-	 debianSupported="-9.2- -8.2- -7.9- -7.8- -7.6- -7.3-"
-	 [[ $debianSupported == *-$debianVersion-* ]] && unsupportedOS=
 	fi
-
-if [[ $unsupportedOS && $isRpi ]]; then
-	echo
-	echo "A2SERVER and its installer scripts have been tested on Raspbian Wheezy,"
-	echo "Jessie, and Stretch though not this specific firmware version"
-	echo "(${fwhash:0:7}). Just FYI."
-	unsupportedOS=
-elif [[ $unsupportedOS && $isDebian ]]; then
-	echo
-	echo "A2SERVER and its installer scripts have been tested on Debian 7/8/9,"
-	echo "though not this specific point release ($debianVersion). Just FYI."
-	unsupportedOS=
 fi
 
 if [[ $unsupportedOS ]]; then
-	echo
+	cat <<-EOF
-	echo "WARNING: A2SERVER and its installer scripts have only been tested on"
+
-	echo "Debian and Raspbian. Continuing is probably fine, but might not be."
+	WARNING: A2SERVER and its installer scripts have only been tested on
-	echo "Theoretical worst case would be your operating system no longer works"
+	Debian and Raspbian wheezy, jessie, and stretch. It may work with later
-	echo "properly or data is lost, so consider backing up first."
+	versions, but it might not.  The theoretical worst case would be an OS
+	image that no longer works correctly or lost data, so you might want to
+	press ctrl-c here.  Otherwise press Return.
+
+	Detected system: $ras2_os ($ras2_arch)
+	EOF
+	read
 fi
 
 doSetup=1
@@ -186,42 +162,6 @@ if (( $doSetup )); then
 		rm -rf /tmp/a2server-install &>/dev/null
 		mkdir -p /tmp/a2server-install
 
-        checkPw=1
-		while [[ $checkPw ]] ; do
-			userPw=$(sudo grep "^$USER" /etc/shadow | cut -f 2 -d ':')
-			[[ $userPw == "$(echo 'apple2' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isApple2Pw=1 || isApple2Pw=
-			[[ $userPw == "$(echo 'raspberry' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isRaspberryPw=1 || isRaspberryPw=
-
-			password="your password"
-			[[ $isApple2Pw ]] && password="'apple2'"
-			[[ $isRaspberryPw ]] && password="'raspberry'"
-			checkPw=
-
-
-			[[ $isRpi ]] && a2server="your Raspberry Pi" || a2server="A2SERVER"
-			if [[ ! $isApple2Pw && ! -f /usr/local/etc/A2SERVER-version ]]; then
-				if [[ ! $autoAnswerYes ]]; then
-					echo
-					echo "To ensure that all client computers are able to connect to"
-					echo "${a2server} using the same password, you probably want"
-					echo "to change your user password to 'apple2'."
-					echo
-					echo -n "Do you want to change the password for user '$USER' to 'apple2' now? "
-					read
-				fi
-				if [[ $autoAnswerYes || ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
-					echo "A2SERVER: changing password for user '$USER' to 'apple2'..."
-					echo "$USER:apple2" | sudo chpasswd
-				fi
-			fi
-		done
-
-		echo
-		echo "During this installation, enter ${password} if prompted for passwords."
-		echo
-
-		sudo true
-
 		read -d '' a2sSubScripts <<-EOF
 			a2server-1-storage.txt
 			a2server-2-tools.txt
@@ -243,7 +183,7 @@ if (( $doSetup )); then
 		fi
 
 		for _script in $a2sSubScripts; do
-			"$a2sSource/scripts/$_script"
+			"$top_src/scripts/$_script"
 		done
 
 		rm -f /tmp/a2server-packageReposUpdated

update/index.txt

@@ -12,14 +12,14 @@ a2sBranch="master"
 a2sScriptURL="https://raw.githubusercontent.com/RasppleII/a2server/${a2sBranch}"
 a2sTarball="https://github.com/RasppleII/a2server/archive/${a2sBranch}.tar.gz"
 
-# Set a2sSource to the location of the source tree if we're running in one
+# Set top_src to the location of the source tree if we're running in one
-a2sSource="$( dirname "${BASH_SOURCE[0]}" )/.."
+top_src="$( dirname "${BASH_SOURCE[0]}" )/.."
-pushd $a2sSource >/dev/null
+pushd $top_src >/dev/null
-a2sSource="$PWD"
+top_src="$PWD"
 popd >/dev/null
-if [[ ! -f "$a2sSource/.a2server_source" ]]; then
+if [[ ! -f "$top_src/.a2server_source" ]]; then
 	a2sWebUpdate=1
-	a2sSource=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
+	top_src=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
 fi
 
 installedVersion=
@@ -51,7 +51,7 @@ if (( $a2sWebUpdate )); then
 	future.
 	EOT
 else
-	newVersion=$(grep '^a2serverVersion' "$a2sSource/install.sh" | cut -d '"' -f 2)
+	newVersion=$(grep '^a2serverVersion' "$top_src/install.sh" | cut -d '"' -f 2)
 	cat <<-EOT
 	You've started the single command a2server update script from inside the
 	a2server source directory for version $newVersion.  This script will only
@@ -75,7 +75,7 @@ printf "\nProject history:\n"
 if (( $a2sWebUpdate )); then
 	wget -qO- "${a2sScriptURL}/update/versionhistory.txt"
 else
-	cat "$a2sSource/update/versionhistory.txt"
+	cat "$top_src/update/versionhistory.txt"
 fi
 
 cat <<EOT
@@ -95,20 +95,20 @@ if [[ ! $autoAnswerYes ]]; then
 fi
 
 if (( $a2sWebUpdate )); then
-	a2sSource=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
+	top_src=$(mktemp -d /tmp/a2server.XXXXXXXXXXXX)
 
 	# Normally tarballs unpack in a subdirectory, but we want it to unpack into
-	# $a2sSource directly (even though the directory has the tarball in it.)
+	# $top_src directly (even though the directory has the tarball in it.)
-	printf "\na2server: Downloading installer to $a2sSource.\n"
+	printf "\na2server: Downloading installer to $top_src.\n"
-	wget -O "$a2sSource/a2server-$a2sBranch.tar.gz" "$a2sTarball"
+	wget -O "$top_src/a2server-$a2sBranch.tar.gz" "$a2sTarball"
-	tar -C $a2sSource --strip-components=1 -zxf "$a2sSource/a2server-${a2sBranch}.tar.gz"
+	tar -C $top_src --strip-components=1 -zxf "$top_src/a2server-${a2sBranch}.tar.gz"
 fi
 
 # Now we actually run the installer as if we were installing it by hand
 printf "\na2server: Running the update installer now.\n"
-"${a2sSource}/install.sh" -i "$@"
+"${top_src}/install.sh" -i "$@"
 
 if (( $a2sWebUpdate )); then
-	printf "\na2server: Finished with installer, now deleting ${a2sSource}.\n"
+	printf "\na2server: Finished with installer, now deleting ${top_src}.\n"
-	rm -rf "$a2sSource"
+	rm -rf "$top_src"
 fi