contiki/tests/blink-white.c

#include <mc1322x.h>
#include <board.h>

#include "led.h"

#define DELAY 400000

#define LED_BITS LED_WHITE

void main(void) {	
	volatile uint32_t i;
	
	*GPIO_PAD_DIR0 = LED_BITS;

	while(1) {

		*GPIO_DATA0 = LED_BITS;
		
		for(i=0; i<DELAY; i++) { continue; }

		*GPIO_DATA0 = 0x00000000;

		for(i=0; i<DELAY; i++) { continue; }

	};

}
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`#include <mc1322x.h>`
			`#include <board.h>`
updated to use the leds on the RedBee hardware and made it a little more general. Signed-off-by: Mariano Alvira <mar@devl.org> 2009-06-22 16:35:39 +00:00
finish blink tests 2010-02-24 18:35:37 +00:00			`#include "led.h"`

better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`#define DELAY 400000`
preliminary interrupts. looks like it is entering the isr but isn't leaving correctly. 2009-04-20 22:31:13 +00:00
update blinks 2010-02-23 23:19:38 +00:00			`#define LED_BITS LED_WHITE`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`void main(void) {`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00			`volatile uint32_t i;`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00
			`*GPIO_PAD_DIR0 = LED_BITS;`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
			`while(1) {`

better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`*GPIO_DATA0 = LED_BITS;`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
			`for(i=0; i<DELAY; i++) { continue; }`

better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00			`*GPIO_DATA0 = 0x00000000;`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00
			`for(i=0; i<DELAY; i++) { continue; }`

			`};`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 20:00:10 +00:00			`}`
better variable defs. touch objdir to fix problem where board.h would try to get created after it's already been created. 2010-02-23 23:14:32 +00:00